Buenas!!
A ver si me podeis echar un cable... A la hora de grabar un cd me da el siguiente error:
Windows 98 4.10
WinAspi: File 'Wnaspi32.dll': Ver=1, 0, 0, 0, size=36864 bytes, created 05/05/99 22:22:00
Nero Version: 5.5.9.0 (Nero Express)
Recorder: <YAMAHA CRW2100E> Version: 1.0H - HA 0 TA 1 - 5.5.9.0
Adapter driver: <ESDI_506> HA 0
Drive buffer : 8192kB
Bus Type : default (0) -> ATAPI
CD-ROM: <YAMAHA CRW2100E> Version: 1.0H - HA 0 TA 1 - 5.5.9.0
Adapter driver: <ESDI_506> HA 0
Bus Type : default (0) -> ATAPI
YAMAHA CRW2100E (Target 1, E:): Autoinsert Off, DMA On, Disconnect On, SyncDataXfer Off
TOSHIBA CD-ROM XM-6702B (Target 0, F:): Autoinsert Off, DMA Off, Disconnect ?, SyncDataXfer ?
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 20971520 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 127MB (130524kB)
Free physical memory: 11MB (12264kB)
Memory in use : 100 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Enabled (1)
Wizard: Off
CD-ROM (ISO)
22.4.2004
1:54:06 #1 Text 0 File Isodoc.cpp, Line 6002
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
1:54:06 #2 Text 0 File Reader.cpp, Line 118
Reader running
1:54:06 #3 Text 0 File Burncd.cpp, Line 3474
Turn on Track-At-Once, using CD-R/RW media
1:54:06 #4 ISO9660GEN -11 File geniso.cpp, Line 4427
First writeable address = 0 (0x00000000)
1:54:06 #5 Text 0 File ThreadedTransferInterface.cpp, Line 685
Setup items (original item values)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 10266 (10266) = #10266/2:16.66
relocatable, CD pos for caching/writing not required/required, no patch infos
--------------------------------------------------------------
1:54:07 #6 Text 0 File DlgWaitCD.cpp, Line 198
Last possible write address on media: 359845 (79:59.70)
Last address to be written: 10265 ( 2:18.65)
1:54:09 #7 Text 0 File DlgWaitCD.cpp, Line 1393
Recorder: YAMAHA CRW2100E;
CDR code: 00 97 26 66; OSJ entry from: CMC Magnetics Corporation
ATIP Data:
Special Info [hex] 1: D0 00 98, 2: 61 1A 42 (LI 97:26.66), 3: 4F 3B 47 (LO 79:59.71)
Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)
1:54:12 #8 Text 0 File ThreadedTransferInterface.cpp, Line 835
Prepare recorder YAMAHA CRW2100E for write in TAO
DAO infos:
==========
MCN:
TOCTYPE: 0x0 Close Session
Tracks 1 to 1:
TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 21331968
1:54:12 #9 Text 0 File ThreadedTransferInterface.cpp, Line 863
Removed 2 run-out blocks from end of track 1.
1:54:12 #10 Text 0 File ThreadedTransferInterface.cpp, Line 685
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 10266 (10266) = #10266/2:16.66
relocatable, CD pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 10264 blocks [YAMAHA CRW2100E ]
--------------------------------------------------------------
1:54:12 #11 Phase 24 File dlgbrnst.cpp, Line 1560
Caching of files started
1:54:12 #12 SCSI -1099 File Cdrdrv.cpp, Line 1202
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x016CCB10
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x1A
Sense Qual: 0x00
CDB Data: 0x55 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x40 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x1A 0x00
ModeSel: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x05 0x36 0x11 0xC4 0x08 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x96
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x08 0x00 0x00 0x00 0x00 0x00
1:54:12 #13 SCSI -1099 File Cdrdrv.cpp, Line 1202
SCSI Exec, HA 0, TA 1, LUN 0, buffer 0x016CCAC8
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x1A
Sense Qual: 0x00
CDB Data: 0x55 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x40 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x1A 0x00
ModeSel: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x05 0x36 0x11 0xC4 0x08 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x96
0x00 0x20 0x20 0x20 0x20 0x20 0x20 0x20
0x20 0x20 0x20 0x20 0x20 0x20 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x08 0x00 0x00 0x00 0x00 0x00
1:54:12 #14 Phase 25 File dlgbrnst.cpp, Line 1560
Caching of files completed
1:54:18 #15 Text 0 File Scsicmd.cpp, Line 383
SCSI not using temporary buffers
20 out of 20 temporary buffers allocated
Existing drivers:
File 'IoSubSys\SCSI1HLP.VXD': Ver=4.10.1998, size=19270 bytes, created 05/05/99 22:22:00
File 'IoSubsys\NEROCD95.VXD': Ver=4, 5, 0, 12, size=37811 bytes, created 21/04/04 0:29:52
File 'IoSubsys\CDR4VSD.VXD': Ver=5.3.2.31, size=101616 bytes, created 20/09/03 5:55:16
File 'IoSubsys\CDRALVSD.VXD': Ver=5.3.2.31, size=20043 bytes, created 20/09/03 5:55:16
File 'IoSubsys\ACBHLPR.VXD': Ver=1.01, size=40508 bytes, created 20/09/03 5:55:16
File 'IoSubsys\CDFS.VXD': Ver=4.10.1998, size=59133 bytes, created 05/05/99 22:22:00
File 'IoSubsys\ESDI_506.PDR': Ver=4.10.2222, size=24406 bytes, created 05/05/99 22:22:00
File '..\System\Vmm32\Ios.vxd': Ver=4.10.2222, size=69574 bytes, created 05/05/99 22:22:00
File 'IoSubsys\Disktsd.vxd': Ver=4.10.2222, size=18809 bytes, created 05/05/99 22:22:00
Registry Keys:
Salu2
Instalate la ultima version de nero, en mi web esta..
saludos
lo he hecho y me da error: "el disco no es grabable", he metido otro cd de 100 min (no se si tendra que ver) y me da error en el 51% siempre. :'(
Saludetes;)
Ayudaría un poco que nos indicaras qué tipo de CD estás intentando grabar: video, audio, texto... ¿o te ocurre lo mismo con todos los CD's que intentas grabar?
No obstante, hay algunas cosas que por la info que nos has mostrado sí puedo indicarte:
CitarTOSHIBA CD-ROM XM-6702B (Target 0, F:): Autoinsert Off, DMA Off, Disconnect ?, SyncDataXfer ?
Al parecer tienes el DMA de tu CD-Rom desactivado. Si estás intentando hacer una copia al vuelo, esto es sinónimo de posavasos (CD estropeado), ya que la velocidad de los datos por el bus va a ser leeeennnnta. Por mucha caché que tenga tu tostadora y mucha protección buffer-Underrun, el desastre está prácticamente asegurado. Y si tienes CD y tostadora en el mismo canal IDE, entonces te garantizo un desastre al 100%
CitarMultisession : TRUE
Multisession type: : Start multisession
¿Tienes algún interés especial en hacer un CD multisesión? En ocasiones, estas grabaciones son problemáticas, ya que no siempre la tostadora deja una señal clara para que pueda posteriormente volver a continuar la pista para grabar. Además, en equipos antiguos no siempre está garantizada la lectura del CD.
CitarSCSI not using temporary buffers
Sobre este mensaje de error (creo que aquí está la clave), Nero tiene una página con info que puede serte de utilidad:
http://www.nero.com/en/helptool/229.htm
Eso sí, está en inglés... pero resulta muy fácil de entender.
Espero que te sirva de ayuda esta info;)
PD: Si lo que necesitas es clonar un CD (copiar un CD completo) te recomiendo que uses como soft el Clone o el Alcohol 120%
Gracias chicos, asunto solucionado!! Me he comprado otra grabadora xDD ;D ;D ;D
Salu2