Hola, gracias por admitirme en el foro, tengo el siguente problema:
Estoy haciendo un ejercicio del libro de Deitel "Como programar en C/C++"
El ejercicio trata de hacer gráficos de tortuga, el problema lo tengo al hacer una función para introducir los comandos que se van a realizar, los comandos van en forma de número y el problema que tengo es que al introducir el comando '5' debo poner 5 una coma y el numero de movimientos, es decir que este comando sirve para mover la tortuga x movimientos por ejemplo si pongo "5,9" la tortuga se moverá 9 casillas, mi problema es que no entiendo como declarar el arreglo o como hacer que simplemente ignore la coma, ¿alguien sabe como podría solucionarlo? Gracias.
void guarda_comandos(int comands[COMANDOS]){
int i, x;
for (x = 0; i != 9 && x < COMANDOS; x++) {
printf("Introduzca el próximo comando: ");
scanf("%d", &i);
comands[x] = i;
}
for (x = 0; x < COMANDOS && comands[x] != 0; x++) {
printf("%d", comands[x]);
}
}
Bueno gracias por la ayuda :¬¬ , de cualquier manera encontré el código como viene en el libro de soluciones aunque realmente no lo comprendo y estoy un poco frustrado porque mi compilador me da errores al ejecutarlo, utilizo "xcode".
#include <stdio.h>
#define TRUE 1
#define FALSE 0
#define MAX 100 /* the maximum number of commands */
/* function prototypes */
void getCommands( int commands[][ 2 ] );
int turnRight( int d );
int turnLeft( int d );
void movePen( int down, int a[][ 50 ], int dir, int dist );
void printArray( int a[][ 50 ] );
int main(int argc, const char * argv[])
{
//Declaraciones
int floor[ 50 ][ 50 ] = { 0 };
int penDown = FALSE;
int command;
int direction = 0;
int commandArray[MAX][ 2 ] = {0};
int distance;
int count = 0;
//Fin Declaraciones
getCommands( commandArray );
command = commandArray[ count ][ 0 ];
while(command!=9){
switch (command) {
case 2:
penDown = TRUE;
break; /* exit switch */
case 3:
direction = turnRight( direction );
break; /* exit switch */
case 4:
direction = turnLeft( direction );
break; /* exit switch */
case 5:
distance = commandArray[count][1];
movePen( penDown, floor, direction, distance);
break; /* exit switch */
case 6:
printf( "\nThe drawing is:\n\n" ); printArray( floor );
break; /* exit switch */
} /* end switch */
command = commandArray[ ++count ][ 0 ];
} /* end while */
return 0;
}/**************-FIN-DE-MAIN-***************/
void getCommands( int commands[][2]) {
int i; /* counter */
int tempCommand; /* temporary command holder */
printf( "Enter command ( 9 to end input ): ");
scanf( "%d", &tempCommand );
/* recieve commands until -9 or 100 commands perform action */
for(i=0;tempCommand!=9&&i<MAX;i++){ commands[ i ][ 0 ] = tempCommand;
/* ignore comma after 5 is entered */
if ( tempCommand == 5 ) {
scanf( ",%d", &commands[ i ][ 1 ] );
} /* end if */
printf( "Enter command ( 9 to end input ): " );
scanf( "%d", &tempCommand );
}
commands[ i ][ 0 ] = 9;
}/* FIN DE GET COMMANDS */
int turnRight( int d )
{
return ++d > 3 ? 0 : d;
}
int turnLeft( int d ) {
return --d < 0 ? 3 : d;
}
void movePen( int down, int a[][ 50 ], int dir, int dist ) {
int i;
int j;
static int xPos = 0;
static int yPos = 0;
/* determine which way to move pen */
switch(dir){
case 0:
for (j=1;j<=dist&&yPos+j<50;j++){
if (down) {
a[xPos][yPos+j]=1;
} /* end if */
}
yPos += j - 1;
break; /* exit switch */
case 1: /* move down */
/* move dist spaces or until edge of floor */
for (i=1;i<=dist&&xPos+i<50;i++){
if (down) {
a[xPos+i][yPos] =1;
}
}
xPos += i - 1;
break;
case 2: /* move to the left */
for (j=1;j<=dist&&yPos-j>=0;j++){
if (down){
a[xPos][yPos-j]=1;
} /* end if */
}
yPos -= j - 1;
break; /* exit switch */
case 3: /* move up */
/* move dist spaces or until edge of floor */
for (i=1;i<=dist&&xPos-i>=0;i++){
if (down){
a[xPos-i][yPos]=1;
} /* end if */
}
xPos -= i - 1;
break; /* exit switch */
}
}
void printArray( int a[][ 50 ] ) {
int i; /* counter */
int j; /* counter */
/* loop through array */
for ( i = 0; i < 50; i++ ) {
/* loop through array */
for ( j = 0; j < 50; j++ ) {
putchar( a[ i ][ j ] ? '*' : ' ' );
} /* end for */
putchar( '\n' );
} /* end for */
}
El código está simplemente copiado y como dije anteriormente me gustaría saber como es que esto.. if ( tempCommand == 5 ) {
scanf( ",%d", &commands[ i ][ 1 ] );
} /* end if */
ignora la coma pues lee la variable tempCommand pero ésta fue previamente escaneada y ahí luego luego viene mi problema al meter el 5 y la coma, si alguien me pudiera ayudar se lo agradecería para avanzar en mi aprendizaje.
se tan poco de c pero cuando vi tu code original me di cuenta que un for no dejaba que funcione el otro....te iba a poner un ejemplo...pero bue esta bueno que lo leas y trates de entenderlo...me pongo a leer esta solucion y te digo
lo que pasa es que no se entiende si lo sacas de contexto
for(i=0;tempCommand!=9&&i<MAX;i++){ commands[ i ][ 0 ] = tempCommand;
/* ignore comma after 5 is entered */
if ( tempCommand == 5 ) {
scanf( ",%d", &commands[ i ][ 1 ] );
} /* end if */
printf( "Enter command ( 9 to end input ): " );
scanf( "%d", &tempCommand );
}
se lee asi, mas o menos, (haga un bucle iniciando en i=o ; con limite en la variable tempCommand distinta de 9 y con i menor a MAX ; si no entra en el limite sume uno a i ) mientras no cumpla esos limites hara lo siguiente la variable tempCommand se guarda en commands[ i ][ 0 ] (fijate que cada bucle hara que i suba en una.
el bucle no termina alli dice si tempCommand es igual a 5 ingrese manualmente un decimal entero para que ocupe el lugar de la variable commands[ i ][ 0 ] o sea si es 5 meta el dato a mano que el bucle no lo hace, en cada bucle va a aparecer en pantalla si mete 9 sale del bucle,
El tema de la coma la soluciona porque la variable commands[ i ][ 1 ] es una matriz bidimensional
has probado a introducir el movimiento asi?
scanf("%d %c %d", &a, &aux, &b);
en este caso, en aux tendras la ','. luego podrias comprobarlo por si el usuario ha cometido un error, algo asi:
if (aux != ',') printf("ERROR: Introduce un formato valido -> a,b\n");
un saludo!