Mensajes

Buenas me baje WPSCrackGUI v1.1.7 y lo meti en carpeta modulos de wifiway.Aranque USB wifiway.Pero no va, aunque en el menu K aparece en wifiway-Wap-wps-WPSCrackGUI v1.1.7 .Cuando lo pico no sale nada, parece que carga por el simbolito en pantalla pero no sale la interfax.EL archivo es el que corresponede .xzm.Incluso si me voy a carpeta modulos donde esta  y lo pico me da la opcción de desmontar. Prove con WPSCrackGUI(1) v1.1.7 , de fecha posterior y peor da error y no monta. Prove WPSCrackGUI v1.0.9 y funciono bien. Me podeis hechar una mano. GRACIAS.

Los años pasan y las soluciones faciles llegan por el trabajo de otros. Wifiway 3.4 lo reconoce y saca claveas wep bien rapido.
Las wap con reaver no se sabe claro, por que rula pero no muy claro.

No quiero mezclar, pero leyendo tus otros post .Mejor bajo modulo wpscrakGUi que tiene reaver incluido y actualizado.Y ya te comento.

Gracias por tu tiempo.

Desde el punto y la coma en el pais de la paciencia y del buen hacer ,gracias de nuevo.

Haber puede ser este ( reaver-1.4- final.xzm  100kB del 24-01-12.)
Lo descarge de downloadwireless.net.

Me puedes poner el enlace para descargar el modulo de actualizacion del reaver.
No lo encuentro descarge uno que pone firmwares-broacom.xzm. Que pesa 560 K.
Pero no se si es ese.Gracias.

Hola,
me está ayudando mucho seguir este topic, pero estoy llegando a los mismos errores que andres67. Tengo un belkin f5d8053 con su maravilloso rt2870 y no soy capaz de hacerlo funcionar en linux. He usado Bt3 y Wifislax. Con bt encontré ath0 o ath1, pero con Wifislax ni siquiera eso. He probado con los drivers de nemesis y demás. Salvo que no me veo capaz de modificar el driver como en algún mensaje se ha indicado.
Algún experto?

Usa el driver http://www.mediafire.com/?o3izxzzdyym y sigue este proceso:


ESTA  SI FUE BUENA:

wifislax ~ # su
wifislax ~ # cd '/root/rt2870-kernel-2.6.24-nemesis'
wifislax rt2870-kernel-2.6.24-nemesis # make clean
cp -f os/linux/Makefile.6 os/linux/Makefile
make -C os/linux clean
make[1]: Entering directory `/root/rt2870-kernel-2.6.24-nemesis/os/linux'
rm -f ../../common/*.o
rm -f ../../common/.*.{cmd,flags,d}
rm -f ../../os/linux/*.{o,ko,mod.{o,c}}
rm -f ../../os/linux/.*.{cmd,flags,d}
rm -fr ../../os/linux/.tmp_versions
rm -f ../../sta/*.o
rm -f ../../sta/.*.{cmd,flags,d}
make[1]: Leaving directory `/root/rt2870-kernel-2.6.24-nemesis/os/linux'
rm -rf os/linux/Makefile
wifislax rt2870-kernel-2.6.24-nemesis # make && make install
make -C tools
make[1]: Entering directory `/root/rt2870-kernel-2.6.24-nemesis/tools'
gcc -g bin2h.c -o bin2h
make[1]: Leaving directory `/root/rt2870-kernel-2.6.24-nemesis/tools'
/root/rt2870-kernel-2.6.24-nemesis/tools/bin2h
cp -f os/linux/Makefile.6 /root/rt2870-kernel-2.6.24-nemesis/os/linux/Makefile
make  -C  /lib/modules/2.6.21.5/build SUBDIRS=/root/rt2870-kernel-2.6.24-nemesis/os/linux modules
make[1]: Entering directory `/usr/src/linux-2.6.21.5'

  WARNING: Symbol version dump /usr/src/linux-2.6.21.5/Module.symvers
           is missing; modules will have no dependencies and modversions.

  CC [M]  /root/rt2870-kernel-2.6.24-nemesis/os/linux/../../common/md5.o
  CC [M]  /root/rt2870-kernel-2.6.24-nemesis/os/linux/../../common/mlme.o
  CC [M]  /root/rt2870-kernel-2.6.24-nemesis/os/linux/../../common/rtmp_wep.o
  CC [M]  /root/rt2870-kernel-2.6.24-nemesis/os/linux/../../common/action.o
  CC [M]  /root/rt2870-kernel-2.6.24-nemesis/os/linux/../../common/ba_action.o
  CC [M]  /root/rt2870-kernel-2.6.24-nemesis/os/linux/../../common/cmm_data.o
  CC [M]  /root/rt2870-kernel-2.6.24-nemesis/os/linux/../../common/rtmp_init.o
  CC [M]  /root/rt2870-kernel-2.6.24-nemesis/os/linux/../../common/rtmp_tkip.o
  CC [M]  /root/rt2870-kernel-2.6.24-nemesis/os/linux/../../common/cmm_sync.o
  CC [M]  /root/rt2870-kernel-2.6.24-nemesis/os/linux/../../common/eeprom.o
  CC [M]  /root/rt2870-kernel-2.6.24-nemesis/os/linux/../../common/cmm_sanity.o
  CC [M]  /root/rt2870-kernel-2.6.24-nemesis/os/linux/../../common/cmm_info.o
  CC [M]  /root/rt2870-kernel-2.6.24-nemesis/os/linux/../../common/cmm_wpa.o
  CC [M]  /root/rt2870-kernel-2.6.24-nemesis/os/linux/../../common/dfs.o
  CC [M]  /root/rt2870-kernel-2.6.24-nemesis/os/linux/../../sta/assoc.o
  CC [M]  /root/rt2870-kernel-2.6.24-nemesis/os/linux/../../sta/aironet.o
  CC [M]  /root/rt2870-kernel-2.6.24-nemesis/os/linux/../../sta/auth.o
  CC [M]  /root/rt2870-kernel-2.6.24-nemesis/os/linux/../../sta/auth_rsp.o
  CC [M]  /root/rt2870-kernel-2.6.24-nemesis/os/linux/../../sta/sync.o
  CC [M]  /root/rt2870-kernel-2.6.24-nemesis/os/linux/../../sta/sanity.o
  CC [M]  /root/rt2870-kernel-2.6.24-nemesis/os/linux/../../sta/rtmp_data.o
  CC [M]  /root/rt2870-kernel-2.6.24-nemesis/os/linux/../../sta/connect.o
  CC [M]  /root/rt2870-kernel-2.6.24-nemesis/os/linux/../../sta/wpa.o
  CC [M]  /root/rt2870-kernel-2.6.24-nemesis/os/linux/../../os/linux/rt_linux.o
  CC [M]  /root/rt2870-kernel-2.6.24-nemesis/os/linux/../../os/linux/rt_profile.o
  CC [M]  /root/rt2870-kernel-2.6.24-nemesis/os/linux/../../os/linux/rt_main_dev.o
/root/rt2870-kernel-2.6.24-nemesis/os/linux/../../os/linux/rt_main_dev.c: In function `rt_ieee80211_if_setup':
/root/rt2870-kernel-2.6.24-nemesis/os/linux/../../os/linux/rt_main_dev.c:672: warning: assignment from incompatible pointer type
  CC [M]  /root/rt2870-kernel-2.6.24-nemesis/os/linux/../../os/linux/sta_ioctl.o
  CC [M]  /root/rt2870-kernel-2.6.24-nemesis/os/linux/../../os/linux/2870_main_dev.o
  CC [M]  /root/rt2870-kernel-2.6.24-nemesis/os/linux/../../common/2870_rtmp_init.o
  CC [M]  /root/rt2870-kernel-2.6.24-nemesis/os/linux/../../common/rtusb_io.o
  CC [M]  /root/rt2870-kernel-2.6.24-nemesis/os/linux/../../common/rtusb_bulk.o
  CC [M]  /root/rt2870-kernel-2.6.24-nemesis/os/linux/../../common/rtusb_data.o
  CC [M]  /root/rt2870-kernel-2.6.24-nemesis/os/linux/../../common/cmm_data_2870.o
  LD [M]  /root/rt2870-kernel-2.6.24-nemesis/os/linux/rt2870sta.o
  Building modules, stage 2.
  MODPOST 1 modules
  CC      /root/rt2870-kernel-2.6.24-nemesis/os/linux/rt2870sta.mod.o
  LD [M]  /root/rt2870-kernel-2.6.24-nemesis/os/linux/rt2870sta.ko
make[1]: Leaving directory `/usr/src/linux-2.6.21.5'
make -C /root/rt2870-kernel-2.6.24-nemesis/os/linux -f Makefile.6 install
mkdir: cannot create directory `/etc/Wireless': File exists
make[1]: Entering directory `/root/rt2870-kernel-2.6.24-nemesis/os/linux'
rm -rf /etc/Wireless/RT2870STA
mkdir /etc/Wireless/RT2870STA
cp /root/rt2870-kernel-2.6.24-nemesis/RT2870STA.dat /etc/Wireless/RT2870STA/.
install -d /lib/modules/2.6.21.5/kernel/drivers/net/wireless/
install -m 644 -c rt2870sta.ko /lib/modules/2.6.21.5/kernel/drivers/net/wireless/
/sbin/depmod -a 2.6.21.5
make[1]: Leaving directory `/root/rt2870-kernel-2.6.24-nemesis/os/linux'
wifislax rt2870-kernel-2.6.24-nemesis # modprobe rt2870sta
wifislax rt2870-kernel-2.6.24-nemesis # iwconfig ra0
Warning: Driver for device ra0 has been compiled with an ancient version
of Wireless Extension, while this program support version 11 and later.
Some things may be broken...

ra0       RT2870 Wireless  ESSID:""  Nickname:""
          Mode:Auto  Frequency=2.412 GHz
          Link Quality:0  Signal level:0  Noise level:113
          Rx invalid nwid:0  invalid crypt:0  invalid misc:0

wifislax rt2870-kernel-2.6.24-nemesis # iwconfig ra0 up
iwconfig: unknown command "up"
wifislax rt2870-kernel-2.6.24-nemesis # airmon-ng start ra0


Interface       Chipset         Driver

ra0             Ralink b/g      rt2500 (monitor mode enabled)

wifislax rt2870-kernel-2.6.24-nemesis #

ESTA CREO QUE SI FUE BUENA:

wifislax ~ # su
wifislax ~ # cd '/root/rt2870-kernel-2.6.24-nemesis'
wifislax rt2870-kernel-2.6.24-nemesis # make clean
cp -f os/linux/Makefile.6 os/linux/Makefile
make -C os/linux clean
make[1]: Entering directory `/root/rt2870-kernel-2.6.24-nemesis/os/linux'
rm -f ../../common/*.o
rm -f ../../common/.*.{cmd,flags,d}
rm -f ../../os/linux/*.{o,ko,mod.{o,c}}
rm -f ../../os/linux/.*.{cmd,flags,d}
rm -fr ../../os/linux/.tmp_versions
rm -f ../../sta/*.o
rm -f ../../sta/.*.{cmd,flags,d}
make[1]: Leaving directory `/root/rt2870-kernel-2.6.24-nemesis/os/linux'
rm -rf os/linux/Makefile
wifislax rt2870-kernel-2.6.24-nemesis # make && make install
make -C tools
make[1]: Entering directory `/root/rt2870-kernel-2.6.24-nemesis/tools'
gcc -g bin2h.c -o bin2h
make[1]: Leaving directory `/root/rt2870-kernel-2.6.24-nemesis/tools'
/root/rt2870-kernel-2.6.24-nemesis/tools/bin2h
cp -f os/linux/Makefile.6 /root/rt2870-kernel-2.6.24-nemesis/os/linux/Makefile
make  -C  /lib/modules/2.6.21.5/build SUBDIRS=/root/rt2870-kernel-2.6.24-nemesis/os/linux modules
make[1]: Entering directory `/usr/src/linux-2.6.21.5'

  WARNING: Symbol version dump /usr/src/linux-2.6.21.5/Module.symvers
           is missing; modules will have no dependencies and modversions.

  CC [M]  /root/rt2870-kernel-2.6.24-nemesis/os/linux/../../common/md5.o
  CC [M]  /root/rt2870-kernel-2.6.24-nemesis/os/linux/../../common/mlme.o
  CC [M]  /root/rt2870-kernel-2.6.24-nemesis/os/linux/../../common/rtmp_wep.o
  CC [M]  /root/rt2870-kernel-2.6.24-nemesis/os/linux/../../common/action.o
  CC [M]  /root/rt2870-kernel-2.6.24-nemesis/os/linux/../../common/ba_action.o
  CC [M]  /root/rt2870-kernel-2.6.24-nemesis/os/linux/../../common/cmm_data.o
  CC [M]  /root/rt2870-kernel-2.6.24-nemesis/os/linux/../../common/rtmp_init.o
  CC [M]  /root/rt2870-kernel-2.6.24-nemesis/os/linux/../../common/rtmp_tkip.o
  CC [M]  /root/rt2870-kernel-2.6.24-nemesis/os/linux/../../common/cmm_sync.o
  CC [M]  /root/rt2870-kernel-2.6.24-nemesis/os/linux/../../common/eeprom.o
  CC [M]  /root/rt2870-kernel-2.6.24-nemesis/os/linux/../../common/cmm_sanity.o
  CC [M]  /root/rt2870-kernel-2.6.24-nemesis/os/linux/../../common/cmm_info.o
  CC [M]  /root/rt2870-kernel-2.6.24-nemesis/os/linux/../../common/cmm_wpa.o
  CC [M]  /root/rt2870-kernel-2.6.24-nemesis/os/linux/../../common/dfs.o
  CC [M]  /root/rt2870-kernel-2.6.24-nemesis/os/linux/../../sta/assoc.o
  CC [M]  /root/rt2870-kernel-2.6.24-nemesis/os/linux/../../sta/aironet.o
  CC [M]  /root/rt2870-kernel-2.6.24-nemesis/os/linux/../../sta/auth.o
  CC [M]  /root/rt2870-kernel-2.6.24-nemesis/os/linux/../../sta/auth_rsp.o
  CC [M]  /root/rt2870-kernel-2.6.24-nemesis/os/linux/../../sta/sync.o
  CC [M]  /root/rt2870-kernel-2.6.24-nemesis/os/linux/../../sta/sanity.o
  CC [M]  /root/rt2870-kernel-2.6.24-nemesis/os/linux/../../sta/rtmp_data.o
  CC [M]  /root/rt2870-kernel-2.6.24-nemesis/os/linux/../../sta/connect.o
  CC [M]  /root/rt2870-kernel-2.6.24-nemesis/os/linux/../../sta/wpa.o
  CC [M]  /root/rt2870-kernel-2.6.24-nemesis/os/linux/../../os/linux/rt_linux.o
  CC [M]  /root/rt2870-kernel-2.6.24-nemesis/os/linux/../../os/linux/rt_profile.o
  CC [M]  /root/rt2870-kernel-2.6.24-nemesis/os/linux/../../os/linux/rt_main_dev.o
/root/rt2870-kernel-2.6.24-nemesis/os/linux/../../os/linux/rt_main_dev.c: In function `rt_ieee80211_if_setup':
/root/rt2870-kernel-2.6.24-nemesis/os/linux/../../os/linux/rt_main_dev.c:672: warning: assignment from incompatible pointer type
  CC [M]  /root/rt2870-kernel-2.6.24-nemesis/os/linux/../../os/linux/sta_ioctl.o
  CC [M]  /root/rt2870-kernel-2.6.24-nemesis/os/linux/../../os/linux/2870_main_dev.o
  CC [M]  /root/rt2870-kernel-2.6.24-nemesis/os/linux/../../common/2870_rtmp_init.o
  CC [M]  /root/rt2870-kernel-2.6.24-nemesis/os/linux/../../common/rtusb_io.o
  CC [M]  /root/rt2870-kernel-2.6.24-nemesis/os/linux/../../common/rtusb_bulk.o
  CC [M]  /root/rt2870-kernel-2.6.24-nemesis/os/linux/../../common/rtusb_data.o
  CC [M]  /root/rt2870-kernel-2.6.24-nemesis/os/linux/../../common/cmm_data_2870.o
  LD [M]  /root/rt2870-kernel-2.6.24-nemesis/os/linux/rt2870sta.o
  Building modules, stage 2.
  MODPOST 1 modules
  CC      /root/rt2870-kernel-2.6.24-nemesis/os/linux/rt2870sta.mod.o
  LD [M]  /root/rt2870-kernel-2.6.24-nemesis/os/linux/rt2870sta.ko
make[1]: Leaving directory `/usr/src/linux-2.6.21.5'
make -C /root/rt2870-kernel-2.6.24-nemesis/os/linux -f Makefile.6 install
mkdir: cannot create directory `/etc/Wireless': File exists
make[1]: Entering directory `/root/rt2870-kernel-2.6.24-nemesis/os/linux'
rm -rf /etc/Wireless/RT2870STA
mkdir /etc/Wireless/RT2870STA
cp /root/rt2870-kernel-2.6.24-nemesis/RT2870STA.dat /etc/Wireless/RT2870STA/.
install -d /lib/modules/2.6.21.5/kernel/drivers/net/wireless/
install -m 644 -c rt2870sta.ko /lib/modules/2.6.21.5/kernel/drivers/net/wireless/
/sbin/depmod -a 2.6.21.5
make[1]: Leaving directory `/root/rt2870-kernel-2.6.24-nemesis/os/linux'
wifislax rt2870-kernel-2.6.24-nemesis # modprobe rt2870sta
wifislax rt2870-kernel-2.6.24-nemesis # iwconfig ra0
Warning: Driver for device ra0 has been compiled with an ancient version
of Wireless Extension, while this program support version 11 and later.
Some things may be broken...

ra0       RT2870 Wireless  ESSID:""  Nickname:""
          Mode:Auto  Frequency=2.412 GHz
          Link Quality:0  Signal level:0  Noise level:113
          Rx invalid nwid:0  invalid crypt:0  invalid misc:0

wifislax rt2870-kernel-2.6.24-nemesis # iwconfig ra0 up
iwconfig: unknown command "up"
wifislax rt2870-kernel-2.6.24-nemesis # airmon-ng start ra0


Interface       Chipset         Driver

ra0             Ralink b/g      rt2500 (monitor mode enabled)

wifislax rt2870-kernel-2.6.24-nemesis #

--------------------------------------------------------
Aunque me salen dos Advertencias. No se como lo veis.

ADVERTENCIA: Symbol version dump / usr/src/linux-2.6.21.5/Module.symvers
           falta; módulos no tendrá dependencias y MODVERSIONS.


Advertencia: Driver para el dispositivo ra0 ha sido compilado con una versión antigua
Extensión de Wireless, mientras que esta versión de apoyo al programa 11 y más tarde.
Algunas cosas pueden ser rotas ...

Abri mi usb wifi zaapa zw-uw11n mi sorpresa el chip es Ralink rt3070L.Aunque los drvers que trae en el disco instala rt2870.

ASi que prove este driver:http://www.filefactory.com/file/af31fg2/n/rt2870-2_6_28-apocolipse_tar_gz

Su instalacion  asi:

COdigo:
su

y ahora...


Código:
wget http://www.filefactory.com/file/af31fg2/n/rt2870-2_6_28-apocolipse_tar_gz

2. Los instalamos



Código: Seleccionar todo
tar xvf rt2870-2.6.28-apocolipse.tar.gz


Código:
cd rt2870-2.6.28-apocolipse

3. Modificamos el driver para que reconozca nuestra flamante tarjetita


Código:
cd include


Código:
nano rt2870.h

Ahora editamos las lineas de dispositivos e incluimos la nuestra que seria....

#define RT2870_USB_DEVICES \
{ \
{USB_DEVICE(0x148F,0x2770)}, /* Ralink */ \
{USB_DEVICE(0x148F,0x2870)}, /* Ralink */ \
{USB_DEVICE(0x148F,0x3070)}, /* Ralink */ \
{USB_DEVICE(0x0B05,0x1731)}, /* Asus */ \
{USB_DEVICE(0x0B05,0x1732)}, /* Asus */ \
{USB_DEVICE(0x0B05,0x1742)}, /* Asus */ \
{USB_DEVICE(0x0DF6,0x0017)}, /* Sitecom */ \
{USB_DEVICE(0x0DF6,0x002B)}, /* Sitecom */ \
{USB_DEVICE(0x0DF6,0x002C)}, /* Sitecom */ \
{USB_DEVICE(0x0DF6,0x002D)}, /* Sitecom */ \
{USB_DEVICE(0x14B2,0x3C06)}, /* Conceptronic */ \
{USB_DEVICE(0x14B2,0x3C28)}, /* Conceptronic */ \
{USB_DEVICE(0x2019,0xED06)}, /* Planex Communications, Inc. */ \
{USB_DEVICE(0x07D1,0x3C09)}, /* D-Link */ \
{USB_DEVICE(0x14B2,0x3C07)}, /* AL */ \
{USB_DEVICE(0x050D,0x8053)}, /* Belkin */ \
{USB_DEVICE(0x14B2,0x3C23)}, /* Airlink */ \
{USB_DEVICE(0x14B2,0x3C27)}, /* Airlink */ \
{USB_DEVICE(0x07AA,0x002F)}, /* Corega */ \
{USB_DEVICE(0x07AA,0x003C)}, /* Corega */ \
{USB_DEVICE(0x07AA,0x003F)}, /* Corega */ \
{USB_DEVICE(0x1044,0x800B)}, /* Gigabyte */ \
{USB_DEVICE(0x15A9,0x0006)}, /* Sparklan */ \
{USB_DEVICE(0x083A,0xB522)}, /* SMC */ \
{USB_DEVICE(0x083A,0xA618)}, /* SMC */ \
{USB_DEVICE(0x083A,0x7522)}, /* Arcadyan */ \
{USB_DEVICE(0x0CDE,0x0022)}, /* ZCOM */ \
{USB_DEVICE(0x0586,0x3416)}, /* Zyxel */ \
{USB_DEVICE(0x0CDE,0x0025)}, /* Zyxel */ \
{USB_DEVICE(0x1740,0x9701)}, /* EnGenius */ \
{USB_DEVICE(0x1740,0x9702)}, /* EnGenius */ \
{USB_DEVICE(0x0471,0x200f)}, /* Philips */ \
{USB_DEVICE(0x14B2,0x3C25)}, /* Draytek */ \
{USB_DEVICE(0x13D3,0x3247)}, /* AzureWave */ \
{USB_DEVICE(0x083A,0x6618)}, /* Accton */ \
{USB_DEVICE(0x15c5,0x0008)}, /* Amit */ \
{USB_DEVICE(0x0E66,0x0001)}, /* Hawking */ \
{USB_DEVICE(0x0E66,0x0003)}, /* Hawking */ \
{USB_DEVICE(0x129B,0x1828)}, /* Siemens */ \
{} /* end marker */ \
}

3. Cerramos el fichero y procedemos a la instalación
Contol + O=guardar
Control + X=salir
Código:
cd ..
Código:
make clean
Código:
make && make install

4. Cuando acabe toda la perafernalia de la instalación cargamos el driver...
Código:
modprobe rt2870sta

5. Y ahora comprobamos la tarjeta y la ponemos en modo monitor....
Código:
iwconfig ra0
Código:
airmon-ng start ra0
---------------------------------------------------------------------------RESULTADO:


wifislax ~ # cd '/root/driver apocolipse'
wifislax driver apocolipse # tar xvf rt2870-2.6.28-apocolipse.tar.gz
rt2870-2.6.27-apocolipse/os/linux/Makefile.6
rt2870-2.6.27-apocolipse/os/linux/rt_main_dev.o
rt2870-2.6.27-apocolipse/os/linux/2870_main_dev.o
rt2870-2.6.27-apocolipse/os/linux/.rt2870sta.o.cmd
rt2870-2.6.27-apocolipse/os/linux/rt_ate.c
rt2870-2.6.27-apocolipse/os/linux/rt2870sta.mod.c
rt2870-2.6.27-apocolipse/os/linux/sta_ioctl.c
rt2870-2.6.27-apocolipse/os/linux/Module.symvers
rt2870-2.6.27-apocolipse/os/linux/Makefile.4
rt2870-2.6.27-apocolipse/os/linux/rt2870sta.mod.o
rt2870-2.6.27-apocolipse/os/linux/.sta_ioctl.o.cmd
rt2870-2.6.27-apocolipse/os/linux/rt_profile.c
rt2870-2.6.27-apocolipse/os/linux/2870_main_dev.c
rt2870-2.6.27-apocolipse/os/linux/.rt2870sta.mod.o.cmd
rt2870-2.6.27-apocolipse/os/linux/rt2870sta.o
rt2870-2.6.27-apocolipse/os/linux/Module.markers
rt2870-2.6.27-apocolipse/os/linux/sta_ioctl.o
rt2870-2.6.27-apocolipse/os/linux/rt_profile.o
rt2870-2.6.27-apocolipse/os/linux/rt_linux.o
rt2870-2.6.27-apocolipse/os/linux/rt2870sta.ko
rt2870-2.6.27-apocolipse/os/linux/.rt2870sta.ko.cmd
rt2870-2.6.27-apocolipse/os/linux/modules.order
rt2870-2.6.27-apocolipse/os/linux/.rt_linux.o.cmd
rt2870-2.6.27-apocolipse/os/linux/rt_main_dev.c
rt2870-2.6.27-apocolipse/os/linux/.rt_profile.o.cmd
rt2870-2.6.27-apocolipse/os/linux/.2870_main_dev.o.cmd
rt2870-2.6.27-apocolipse/os/linux/config.mk
rt2870-2.6.27-apocolipse/os/linux/.rt_main_dev.o.cmd
rt2870-2.6.27-apocolipse/os/linux/rt_linux.c
rt2870-2.6.27-apocolipse/tools/Makefile
rt2870-2.6.27-apocolipse/tools/bin2h.c
rt2870-2.6.27-apocolipse/tools/bin2h
rt2870-2.6.27-apocolipse/common/.rtmp_init.o.cmd
rt2870-2.6.27-apocolipse/common/.cmm_wpa.o.cmd
rt2870-2.6.27-apocolipse/common/eeprom.c
rt2870-2.6.27-apocolipse/common/netif_block.c
rt2870-2.6.27-apocolipse/common/rtusb_bulk.c
rt2870-2.6.27-apocolipse/common/.eeprom.o.cmd
rt2870-2.6.27-apocolipse/common/.mlme.o.cmd
rt2870-2.6.27-apocolipse/common/rt2870.bin
rt2870-2.6.27-apocolipse/common/rtusb_data.c
rt2870-2.6.27-apocolipse/common/.rtusb_data.o.cmd
rt2870-2.6.27-apocolipse/common/cmm_info.c
rt2870-2.6.27-apocolipse/common/.ba_action.o.cmd
rt2870-2.6.27-apocolipse/common/cmm_sync.c
rt2870-2.6.27-apocolipse/common/.action.o.cmd
rt2870-2.6.27-apocolipse/common/.cmm_data_2870.o.cmd
rt2870-2.6.27-apocolipse/common/.cmm_sync.o.cmd
rt2870-2.6.27-apocolipse/common/md5.c
rt2870-2.6.27-apocolipse/common/.rtmp_wep.o.cmd
rt2870-2.6.27-apocolipse/common/rtmp_wep.c
rt2870-2.6.27-apocolipse/common/.cmm_data.o.cmd
rt2870-2.6.27-apocolipse/common/rtmp_init.c
rt2870-2.6.27-apocolipse/common/ba_action.c
rt2870-2.6.27-apocolipse/common/.cmm_info.o.cmd
rt2870-2.6.27-apocolipse/common/.md5.o.cmd
rt2870-2.6.27-apocolipse/common/cmm_data_2870.c
rt2870-2.6.27-apocolipse/common/.rtusb_io.o.cmd
rt2870-2.6.27-apocolipse/common/rtusb_io.c
rt2870-2.6.27-apocolipse/common/cmm_sanity.c
rt2870-2.6.27-apocolipse/common/rtmp_tkip.c
rt2870-2.6.27-apocolipse/common/cmm_wpa.c
rt2870-2.6.27-apocolipse/common/.rtusb_bulk.o.cmd
rt2870-2.6.27-apocolipse/common/.rtmp_tkip.o.cmd
rt2870-2.6.27-apocolipse/common/mlme.c
rt2870-2.6.27-apocolipse/common/cmm_data.c
rt2870-2.6.27-apocolipse/common/.cmm_sanity.o.cmd
rt2870-2.6.27-apocolipse/common/dfs.c
rt2870-2.6.27-apocolipse/common/action.c
rt2870-2.6.27-apocolipse/common/.2870_rtmp_init.o.cmd
rt2870-2.6.27-apocolipse/common/2870_rtmp_init.c
rt2870-2.6.27-apocolipse/common/.dfs.o.cmd
rt2870-2.6.27-apocolipse/include/rtmp.h
rt2870-2.6.27-apocolipse/include/md5.h
rt2870-2.6.27-apocolipse/include/leap.h
rt2870-2.6.27-apocolipse/include/netif_block.h
rt2870-2.6.27-apocolipse/include/aironet.h
rt2870-2.6.27-apocolipse/include/rt28xx.h
rt2870-2.6.27-apocolipse/include/oid.h
rt2870-2.6.27-apocolipse/include/rtmp_def.h
rt2870-2.6.27-apocolipse/include/action.h
rt2870-2.6.27-apocolipse/include/ap.h
rt2870-2.6.27-apocolipse/include/rt2870.h
rt2870-2.6.27-apocolipse/include/md4.h
rt2870-2.6.27-apocolipse/include/rt_linux.h
rt2870-2.6.27-apocolipse/include/link_list.h
rt2870-2.6.27-apocolipse/include/rt_config.h
rt2870-2.6.27-apocolipse/include/dfs.h
rt2870-2.6.27-apocolipse/include/rt_ate.h
rt2870-2.6.27-apocolipse/include/rtmp_ckipmic.h
rt2870-2.6.27-apocolipse/include/mlme.h
rt2870-2.6.27-apocolipse/include/ap_wpa.h
rt2870-2.6.27-apocolipse/include/wpa.h
rt2870-2.6.27-apocolipse/include/firmware.h
rt2870-2.6.27-apocolipse/include/rtmp_type.h
rt2870-2.6.27-apocolipse/sta/.auth.o.cmd
rt2870-2.6.27-apocolipse/sta/aironet.c
rt2870-2.6.27-apocolipse/sta/.assoc.o.cmd
rt2870-2.6.27-apocolipse/sta/auth_rsp.c
rt2870-2.6.27-apocolipse/sta/.wpa.o.cmd
rt2870-2.6.27-apocolipse/sta/sanity.c
rt2870-2.6.27-apocolipse/sta/sync.c
rt2870-2.6.27-apocolipse/sta/.auth_rsp.o.cmd
rt2870-2.6.27-apocolipse/sta/assoc.c
rt2870-2.6.27-apocolipse/sta/.aironet.o.cmd
rt2870-2.6.27-apocolipse/sta/auth.c
rt2870-2.6.27-apocolipse/sta/.sync.o.cmd
rt2870-2.6.27-apocolipse/sta/.sanity.o.cmd
rt2870-2.6.27-apocolipse/sta/connect.c
rt2870-2.6.27-apocolipse/sta/wpa.c
rt2870-2.6.27-apocolipse/sta/rtmp_data.c
rt2870-2.6.27-apocolipse/sta/.connect.o.cmd
rt2870-2.6.27-apocolipse/sta/.rtmp_data.o.cmd
rt2870-2.6.27-apocolipse/Makefile
rt2870-2.6.27-apocolipse/iwpriv_usage.txt
rt2870-2.6.27-apocolipse/RT2870STA.dat
rt2870-2.6.27-apocolipse/README_STA
wifislax driver apocolipse # cd rt2870-2.6.28-apocolipse
bash: cd: rt2870-2.6.28-apocolipse: No such file or directory
wifislax driver apocolipse # cd rt2870-2.6.27-apocolipse
wifislax rt2870-2.6.27-apocolipse # cd include
wifislax include # nano rt2870.h
wifislax include # cd ..
wifislax rt2870-2.6.27-apocolipse # make clean
cp -f os/linux/Makefile.6 os/linux/Makefile
make -C os/linux clean
make[1]: Entering directory `/root/driver apocolipse/rt2870-2.6.27-apocolipse/os/linux'
Makefile:1: /root/driver: No such file or directory
Makefile:1: apocolipse/rt2870-2.6.27-apocolipse/os/linux/config.mk: No such file or directory
make[1]: *** No rule to make target `apocolipse/rt2870-2.6.27-apocolipse/os/linux/config.mk'. Stop.
make[1]: Leaving directory `/root/driver apocolipse/rt2870-2.6.27-apocolipse/os/linux'
make: *** [clean] Error 2
wifislax rt2870-2.6.27-apocolipse # make && make install
make -C tools
make[1]: Entering directory `/root/driver apocolipse/rt2870-2.6.27-apocolipse/tool s'
gcc -g bin2h.c -o bin2h
make[1]: Leaving directory `/root/driver apocolipse/rt2870-2.6.27-apocolipse/tools '
/root/driver apocolipse/rt2870-2.6.27-apocolipse/tools/bin2h
make: /root/driver: Command not found
make: *** [build_tools] Error 127
wifislax rt2870-2.6.27-apocolipse #
---------------------------------------------------------------------------------
Pero ahora durante la instalacion llega un momento que me quedo trabado, haber si me podeis decir como seguir o que hice mal.

Descarge el driver,lo coloque en root,arrastre el archivo comprimido rt2870-2.6.28-apocolipse hasta una ventana shell
le di a cd de una ventanita que sale de la shell y segui vuestro proceso de instalación.

Una vez descomprimido descubro que no es 2.6.28 sino 2.6.27 OK?

A partir del comando make clean me da el primer error (error 2) Continuo y con comando make && make install y me da (error 127) .
Podeis decirme que hice mal? GRACIAS.

A ver, que ayer con las prisas no tuve tiempo de leer bien tu contestacion.
Yo creo que lo que pasa es que los comandos de airmon y ipconfig los estas poniendo en la shell del driver. Prueba a hacer un iwconfig en una shell nueva.
un saludo...

OK, probare con una shell nueva.Lo del mensaje anterior es en la misma shell.
Gracias.

Me equivoque al escribir tu me dijiste IWCONFIG y yo escribi Ifconfig.
-------------------------------------------------------------------------------
Wifislax  rt2870-kernel-2.6.24-nemesis1 # iwconfig

lo       no wireless extensions.

eth0    no wireless extensions.
---------------------------------------------------------------------------------------------
No me la reconoce parece, probare ha descargar el driver de nuevo y probare otro que hay  para rt3070 que compatible con rt2870 modificado para wireless N.

Ya te contare gracias.

Si se te ocurre algo nuevo estare pendiente de tus comentarios gracias.