Hola chicos, el motivo de este mensaje es que tengo problema con los controladores en debian 8, todo funcionaba bien, hasta el día de hoy, ya no tengo sonido, ya no puedo cambiar el brillo de mi pantalla, y el wifi no funciona, y repito esto es nuevo porque funciona todo muy bien. A que se debe este tipo de problemas?? Tiene solución???
Se debe a algo que hiciste cuando funcionaba :xD Este tipo de problemas se depuran con información. Pega la salida de:
$ dmesg
# lspci -n
# lsmod
jajajajaja ok.
Bueno pues salen bastantes cosas jejejeje aqui va todo.
Con dmesg sale:
[code=cpp][ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.43-1 (2017-04-22)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-amd64 root=UUID=f7669881-787f-4365-85b0-e23c20619ef7 ro quiet
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000003efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000003f000-0x000000000003ffff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000000040000-0x000000000009dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x000000007ab5ffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007ab60000-0x000000007abdafff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007abdb000-0x000000007abecfff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000007abed000-0x000000007b3c2fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007b3c3000-0x000000007b683fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007b684000-0x000000007b6f3fff] type 20
[ 0.000000] BIOS-e820: [mem 0x000000007b6f4000-0x000000007bd13fff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007bd14000-0x000000007bfc6fff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007bfc7000-0x000000007bffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000e00f8000-0x00000000e00f8fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000027fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.40 by American Megatrends
[ 0.000000] efi: ACPI=0x7abde000 ACPI 2.0=0x7abde000 SMBIOS=0x7b5cbd98
[ 0.000000] efi: mem00: type=7, attr=0xf, range=[0x0000000000000000-0x000000000003f000) (0MB)
[ 0.000000] efi: mem01: type=10, attr=0xf, range=[0x000000000003f000-0x0000000000040000) (0MB)
[ 0.000000] efi: mem02: type=7, attr=0xf, range=[0x0000000000040000-0x000000000009e000) (0MB)
[ 0.000000] efi: mem03: type=0, attr=0xf, range=[0x000000000009e000-0x00000000000a0000) (0MB)
[ 0.000000] efi: mem04: type=2, attr=0xf, range=[0x0000000000100000-0x000000000101a000) (15MB)
[ 0.000000] efi: mem05: type=7, attr=0xf, range=[0x000000000101a000-0x0000000001200000) (1MB)
[ 0.000000] efi: mem06: type=2, attr=0xf, range=[0x0000000001200000-0x000000000211a000) (15MB)
[ 0.000000] efi: mem07: type=7, attr=0xf, range=[0x000000000211a000-0x0000000020000000) (478MB)
[ 0.000000] efi: mem08: type=0, attr=0xf, range=[0x0000000020000000-0x0000000020200000) (2MB)
[ 0.000000] efi: mem09: type=7, attr=0xf, range=[0x0000000020200000-0x00000000361a8000) (351MB)
[ 0.000000] efi: mem10: type=2, attr=0xf, range=[0x00000000361a8000-0x00000000370cc000) (15MB)
[ 0.000000] efi: mem11: type=7, attr=0xf, range=[0x00000000370cc000-0x000000003e11d000) (112MB)
[ 0.000000] efi: mem12: type=2, attr=0xf, range=[0x000000003e11d000-0x000000005c000000) (478MB)
[ 0.000000] efi: mem13: type=4, attr=0xf, range=[0x000000005c000000-0x000000005c020000) (0MB)
[ 0.000000] efi: mem14: type=7, attr=0xf, range=[0x000000005c020000-0x0000000077ba3000) (443MB)
[ 0.000000] efi: mem15: type=1, attr=0xf, range=[0x0000000077ba3000-0x0000000077bc1000) (0MB)
[ 0.000000] efi: mem16: type=4, attr=0xf, range=[0x0000000077bc1000-0x000000007a560000) (41MB)
[ 0.000000] efi: mem17: type=7, attr=0xf, range=[0x000000007a560000-0x000000007a866000) (3MB)
[ 0.000000] efi: mem18: type=2, attr=0xf, range=[0x000000007a866000-0x000000007a870000) (0MB)
[ 0.000000] efi: mem19: type=3, attr=0xf, range=[0x000000007a870000-0x000000007ab60000) (2MB)
[ 0.000000] efi: mem20: type=0, attr=0xf, range=[0x000000007ab60000-0x000000007abdb000) (0MB)
[ 0.000000] efi: mem21: type=9, attr=0xf, range=[0x000000007abdb000-0x000000007abed000) (0MB)
[ 0.000000] efi: mem22: type=10, attr=0xf, range=[0x000000007abed000-0x000000007b3c3000) (7MB)
[ 0.000000] efi: mem23: type=6, attr=0x800000000000000f, range=[0x000000007b3c3000-0x000000007b684000) (2MB)
[ 0.000000] efi: mem24: type=5, attr=0x800000000000000f, range=[0x000000007b684000-0x000000007b6f4000) (0MB)
[ 0.000000] efi: mem25: type=4, attr=0xf, range=[0x000000007b6f4000-0x000000007bd14000) (6MB)
[ 0.000000] efi: mem26: type=6, attr=0x800000000000000f, range=[0x000000007bd14000-0x000000007bfc7000) (2MB)
[ 0.000000] efi: mem27: type=4, attr=0xf, range=[0x000000007bfc7000-0x000000007c000000) (0MB)
[ 0.000000] efi: mem28: type=7, attr=0xf, range=[0x0000000100000000-0x0000000280000000) (6144MB)
[ 0.000000] efi: mem29: type=11, attr=0x8000000000000000, range=[0x00000000e00f8000-0x00000000e00f9000) (0MB)
[ 0.000000] efi: mem30: type=11, attr=0x8000000000000000, range=[0x00000000fed01000-0x00000000fed02000) (0MB)
[ 0.000000] efi: mem31: type=11, attr=0x8000000000000000, range=[0x00000000fed08000-0x00000000fed09000) (0MB)
[ 0.000000] efi: mem32: type=11, attr=0x8000000000000000, range=[0x00000000ffb00000-0x0000000100000000) (5MB)
[ 0.000000] SMBIOS 2.8 present.
[ 0.000000] DMI: Acer Aspire ZC-700/IPMBW-BR, BIOS R01-B2 01/28/2016
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x280000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 07CB00000 mask FFFF00000 uncachable
[ 0.000000] 2 base 07CC00000 mask FFFC00000 uncachable
[ 0.000000] 3 base 07D000000 mask FFF000000 uncachable
[ 0.000000] 4 base 07E000000 mask FFE000000 uncachable
[ 0.000000] 5 base 100000000 mask F00000000 write-back
[ 0.000000] 6 base 200000000 mask F80000000 write-back
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0x7cb00000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0x7c000 max_arch_pfn = 0x400000000
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x01cf6000, 0x01cf6fff] PGTABLE
[ 0.000000] BRK [0x01cf7000, 0x01cf7fff] PGTABLE
[ 0.000000] BRK [0x01cf8000, 0x01cf8fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x27fe00000-0x27fffffff]
[ 0.000000] [mem 0x27fe00000-0x27fffffff] page 2M
[ 0.000000] BRK [0x01cf9000, 0x01cf9fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x27c000000-0x27fdfffff]
[ 0.000000] [mem 0x27c000000-0x27fdfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x200000000-0x27bffffff]
[ 0.000000] [mem 0x200000000-0x27bffffff] page 2M
[ 0.000000] BRK [0x01cfa000, 0x01cfafff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x1fffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x1fffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x20200000-0x7ab5ffff]
[ 0.000000] [mem 0x20200000-0x7a9fffff] page 2M
[ 0.000000] [mem 0x7aa00000-0x7ab5ffff] page 4k
[ 0.000000] BRK [0x01cfb000, 0x01cfbfff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x7b6f4000-0x7bd13fff]
[ 0.000000] [mem 0x7b6f4000-0x7b7fffff] page 4k
[ 0.000000] [mem 0x7b800000-0x7bbfffff] page 2M
[ 0.000000] [mem 0x7bc00000-0x7bd13fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x7bfc7000-0x7bffffff]
[ 0.000000] [mem 0x7bfc7000-0x7bffffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
[ 0.000000] [mem 0x100000000-0x1ffffffff] page 2M
[ 0.000000] RAMDISK: [mem 0x361a8000-0x370cbfff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x000000007ABDE000 000024 (v02 ACRSYS)
[ 0.000000] ACPI: XSDT 0x000000007ABDE088 00008C (v01 ACRSYS ACRPRDCT 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x000000007ABEB810 00010C (v05 ACRSYS ACRPRDCT 01072009 AMI 00010013)
[ 0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Gpe0Block: 128/32 (20140424/tbfadt-623)
[ 0.000000] ACPI: DSDT 0x000000007ABDE1A0 00D670 (v02 ACRSYS ACRPRDCT 01072009 INTL 20120913)
[ 0.000000] ACPI: FACS 0x000000007B39FE80 000040
[ 0.000000] ACPI: APIC 0x000000007ABEB920 000084 (v03 ACRSYS ACRPRDCT 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x000000007ABEB9A8 000044 (v01 ACRSYS ACRPRDCT 01072009 AMI 00010013)
[ 0.000000] ACPI: FIDT 0x000000007ABEB9F0 00009C (v01 ACRSYS ACRPRDCT 01072009 AMI 00010013)
[ 0.000000] ACPI: MCFG 0x000000007ABEBA90 00003C (v01 ACRSYS ACRPRDCT 01072009 MSFT 00000097)
[ 0.000000] ACPI: MSDM 0x000000007ABEBAD0 000055 (v03 ACRSYS ACRPRDCT 01072009 AMI 00010013)
[ 0.000000] ACPI: HPET 0x000000007ABEBB28 000038 (v01 ACRSYS ACRPRDCT 01072009 AMI. 00000006)
[ 0.000000] ACPI: SSDT 0x000000007ABEBB60 000763 (v01 PmRef CpuPm 00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT 0x000000007ABEC2C8 000290 (v01 PmRef Cpu0Tst 00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT 0x000000007ABEC558 00017A (v01 PmRef ApTst 00003000 INTL 20061109)
[ 0.000000] ACPI: UEFI 0x000000007ABEC6D8 000042 (v01 ACRSYS ACRPRDCT 00000000 00000000)
[ 0.000000] ACPI: LPIT 0x000000007ABEC720 000104 (v01 ACRSYS ACRPRDCT 00000005 MSFT 0100000D)
[ 0.000000] ACPI: BGRT 0x000000007ABEC828 000038 (v01 ACRSYS ACRPRDCT 01072009 AMI 00010013)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000027fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x27fffffff]
[ 0.000000] NODE_DATA [mem 0x27fff3000-0x27fff7fff]
[ 0.000000] [ffffea0000000000-ffffea0008bfffff] PMD -> [ffff880277600000-ffff88027e5fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x27fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0003efff]
[ 0.000000] node 0: [mem 0x00040000-0x0009dfff]
[ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
[ 0.000000] node 0: [mem 0x20200000-0x7ab5ffff]
[ 0.000000] node 0: [mem 0x7b6f4000-0x7bd13fff]
[ 0.000000] node 0: [mem 0x7bfc7000-0x7bffffff]
[ 0.000000] node 0: [mem 0x100000000-0x27fffffff]
[ 0.000000] On node 0 totalpages: 2076501
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 22 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 6832 pages used for memmap
[ 0.000000] DMA32 zone: 499641 pages, LIFO batch:31
[ 0.000000] Normal zone: 21504 pages used for memmap
[ 0.000000] Normal zone: 1572864 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics stolen memory at 0x7cf00000-0x7eefffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-114
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 131
[ 0.000000] PM: Registered nosave memory: [mem 0x0003f000-0x0003ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x201fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7ab60000-0x7abdafff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7abdb000-0x7abecfff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7abed000-0x7b3c2fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7b3c3000-0x7b683fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7b684000-0x7b6f3fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7bd14000-0x7bfc6fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7c000000-0x7cefffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7cf00000-0x7eefffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x7ef00000-0xe00f7fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe00f8000-0xe00f8fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xe00f9000-0xfed00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed01000-0xfed01fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed02000-0xfed07fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed08000-0xfed08fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed09000-0xffafffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xffb00000-0xffffffff]
[ 0.000000] e820: [mem 0x7ef00000-0xe00f7fff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88027fc00000 s80960 r8192 d21440 u524288
[ 0.000000] pcpu-alloc: s80960 r8192 d21440 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc:
- 0 1 2 3
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2048087
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16.0-4-amd64 root=UUID=f7669881-787f-4365-85b0-e23c20619ef7 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 8045432K/8306004K available (5244K kernel code, 948K rwdata, 1832K rodata, 1208K init, 840K bss, 260572K reserved)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS:33024 nr_irqs:1024 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration failed
[ 0.000000] tsc: PIT calibration matches HPET. 1 loops
[ 0.000000] tsc: Detected 1599.718 MHz processor
[ 0.000039] Calibrating delay loop (skipped), value calculated using timer frequency.. 3199.43 BogoMIPS (lpj=6398872)
[ 0.000045] pid_max: default: 32768 minimum: 301
[ 0.000067] ACPI: Core revision 20140424
[ 0.022482] ACPI: All ACPI Tables successfully acquired
[ 0.025262] Security Framework initialized
[ 0.025277] AppArmor: AppArmor disabled by boot time parameter
[ 0.025280] llama: disabled by default; enable with sysctl kernel.llama.*
[ 0.026262] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.030604] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.032598] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.032623] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.033135] Initializing cgroup subsys memory
[ 0.033149] Initializing cgroup subsys devices
[ 0.033167] Initializing cgroup subsys freezer
[ 0.033174] Initializing cgroup subsys net_cls
[ 0.033185] Initializing cgroup subsys blkio
[ 0.033195] Initializing cgroup subsys perf_event
[ 0.033201] Initializing cgroup subsys net_prio
[ 0.033245] CPU: Physical Processor ID: 0
[ 0.033248] CPU: Processor Core ID: 0
[ 0.033255] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.038676] mce: CPU supports 6 MCE banks
[ 0.038689] CPU0: Thermal monitoring enabled (TM1)
[ 0.038694] process: using mwait in idle threads
[ 0.038702] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 256, 2MB 16, 4MB 16, 1GB 0
tlb_flushall_shift: 6
[ 0.038848] Freeing SMP alternatives memory: 20K (ffffffff81a1d000 - ffffffff81a22000)
[ 0.044497] ftrace: allocating 21702 entries in 85 pages
[ 0.058682] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.098365] smpboot: CPU0: Intel(R) Celeron(R) CPU N3150 @ 1.60GHz (fam: 06, model: 4c, stepping: 03)
[ 0.098382] TSC deadline timer enabled
[ 0.098423] Performance Events: PEBS fmt2+, generic architected perfmon, full-width counters, Intel PMU driver.
[ 0.098434] ... version: 3
[ 0.098437] ... bit width: 40
[ 0.098439] ... generic registers: 2
[ 0.098442] ... value mask: 000000ffffffffff
[ 0.098444] ... max period: 0000007fffffffff
[ 0.098446] ... fixed-purpose events: 3
[ 0.098448] ... event mask: 0000000700000003
[ 0.101772] x86: Booting SMP configuration:
[ 0.101779] .... node #0, CPUs: #1
[ 0.120350] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.120639] #2 #3
[ 0.157716] x86: Booted up 1 node, 4 CPUs
[ 0.157722] smpboot: Total of 4 processors activated (12797.74 BogoMIPS)
[ 0.158817] devtmpfs: initialized
[ 0.168895] PM: Registering ACPI NVS region [mem 0x0003f000-0x0003ffff] (4096 bytes)
[ 0.168901] PM: Registering ACPI NVS region [mem 0x7abed000-0x7b3c2fff] (8216576 bytes)
[ 0.169511] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.171611] pinctrl core: initialized pinctrl subsystem
[ 0.171796] NET: Registered protocol family 16
[ 0.172089] cpuidle: using governor ladder
[ 0.172096] cpuidle: using governor menu
[ 0.172218] ACPI: bus type PCI registered
[ 0.172223] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.172427] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.172434] PCI: not using MMCONFIG
[ 0.172437] PCI: Using configuration type 1 for base access
[ 0.186856] ACPI: Added _OSI(Module Device)
[ 0.186863] ACPI: Added _OSI(Processor Device)
[ 0.186866] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.186868] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.220548] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.235380] ACPI: Dynamic OEM Table Load:
[ 0.235394] ACPI: SSDT 0xFFFF8802769B6800 000613 (v01 PmRef Cpu0Ist 00003000 INTL 20061109)
[ 0.236661] ACPI: Dynamic OEM Table Load:
[ 0.236671] ACPI: SSDT 0xFFFF8802769B2000 0003A5 (v01 PmRef Cpu0Cst 00003001 INTL 20061109)
[ 0.260921] ACPI: Dynamic OEM Table Load:
[ 0.260930] ACPI: SSDT 0xFFFF8802769B0C00 00015F (v01 PmRef ApIst 00003000 INTL 20061109)
[ 0.272560] ACPI: Dynamic OEM Table Load:
[ 0.272569] ACPI: SSDT 0xFFFF880276F84280 00008D (v01 PmRef ApCst 00003000 INTL 20061109)
[ 0.286368] ACPI: Interpreter enabled
[ 0.286383] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
[ 0.286395] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[ 0.286427] ACPI: (supports S0 S3 S4 S5)
[ 0.286431] ACPI: Using IOAPIC for interrupt routing
[ 0.286485] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.288988] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
[ 0.289825] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.294976] ACPI: Power Resource [USBC] (on)
[ 0.305894] ACPI: Power Resource [CLK0] (off)
[ 0.306504] ACPI: Power Resource [CLK0] (off)
[ 0.306609] ACPI: Power Resource [CLK1] (off)
[ 0.315970] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.315985] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.316558] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.317771] PCI host bridge to bus 0000:00
[ 0.317779] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.317784] pci_bus 0000:00: root bus resource [io 0x0000-0x006f]
[ 0.317788] pci_bus 0000:00: root bus resource [io 0x0078-0x0cf7]
[ 0.317792] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.317797] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.317801] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
[ 0.317805] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff]
[ 0.317809] pci_bus 0000:00: root bus resource [mem 0x80000000-0xdfffffff]
[ 0.317823] pci 0000:00:00.0: [8086:2280] type 00 class 0x060000
[ 0.318140] pci 0000:00:02.0: [8086:22b1] type 00 class 0x030000
[ 0.318170] pci 0000:00:02.0: reg 0x10: [mem 0x90000000-0x90ffffff 64bit]
[ 0.318187] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff 64bit pref]
[ 0.318199] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.318517] pci 0000:00:13.0: [8086:22a3] type 00 class 0x010601
[ 0.318586] pci 0000:00:13.0: reg 0x20: [io 0xf060-0xf07f]
[ 0.318600] pci 0000:00:13.0: reg 0x24: [mem 0x91415000-0x914157ff]
[ 0.318669] pci 0000:00:13.0: PME# supported from D3hot
[ 0.318923] pci 0000:00:14.0: [8086:22b5] type 00 class 0x0c0330
[ 0.318956] pci 0000:00:14.0: reg 0x10: [mem 0x91400000-0x9140ffff 64bit]
[ 0.319054] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.319216] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.319327] pci 0000:00:1a.0: [8086:2298] type 00 class 0x108000
[ 0.319355] pci 0000:00:1a.0: reg 0x10: [mem 0x91100000-0x911fffff]
[ 0.319370] pci 0000:00:1a.0: reg 0x14: [mem 0x91000000-0x910fffff]
[ 0.319467] pci 0000:00:1a.0: PME# supported from D0 D3hot
[ 0.319720] pci 0000:00:1b.0: [8086:2284] type 00 class 0x040300
[ 0.319756] pci 0000:00:1b.0: reg 0x10: [mem 0x91410000-0x91413fff 64bit]
[ 0.319867] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.320036] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.320136] pci 0000:00:1c.0: [8086:22c8] type 01 class 0x060400
[ 0.320252] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.320418] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.320530] pci 0000:00:1c.2: [8086:22cc] type 01 class 0x060400
[ 0.320648] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.320815] pci 0000:00:1c.2: System wakeup disabled by ACPI
[ 0.320914] pci 0000:00:1c.3: [8086:22ce] type 01 class 0x060400
[ 0.321031] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.321196] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 0.321306] pci 0000:00:1f.0: [8086:229c] type 00 class 0x060100
[ 0.321670] pci 0000:00:1f.3: [8086:2292] type 00 class 0x0c0500
[ 0.321731] pci 0000:00:1f.3: reg 0x10: [mem 0x91414000-0x9141401f]
[ 0.321850] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
[ 0.322349] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.322527] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[ 0.322556] pci 0000:02:00.0: reg 0x10: [io 0xe000-0xe0ff]
[ 0.322596] pci 0000:02:00.0: reg 0x18: [mem 0x91304000-0x91304fff 64bit]
[ 0.322623] pci 0000:02:00.0: reg 0x20: [mem 0x91300000-0x91303fff 64bit pref]
[ 0.322756] pci 0000:02:00.0: supports D1 D2
[ 0.322760] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.322835] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 0.332490] pci 0000:00:1c.2: PCI bridge to [bus 02]
[ 0.332499] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
[ 0.332506] pci 0000:00:1c.2: bridge window [mem 0x91300000-0x913fffff]
[ 0.332681] pci 0000:03:00.0: [8086:095a] type 00 class 0x028000
[ 0.332732] pci 0000:03:00.0: reg 0x10: [mem 0x91200000-0x91201fff 64bit]
[ 0.332966] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.333040] pci 0000:03:00.0: System wakeup disabled by ACPI
[ 0.340498] pci 0000:00:1c.3: PCI bridge to [bus 03]
[ 0.340509] pci 0000:00:1c.3: bridge window [mem 0x91200000-0x912fffff]
[ 0.343224] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.343375] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.343523] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.343670] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.343818] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.343964] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.344112] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.344260] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.345476] ACPI: Enabled 5 GPEs in block 00 to 3F
[ 0.345551] ACPI : EC: GPE = 0x16, I/O: command/status = 0x66, data = 0x62
[ 0.345806] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.345811] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.345817] vgaarb: loaded
[ 0.345820] vgaarb: bridge control possible 0000:00:02.0
[ 0.346037] PCI: Using ACPI for IRQ routing
[ 0.356949] PCI: pci_cache_line_size set to 64 bytes
[ 0.357027] e820: reserve RAM buffer [mem 0x0003f000-0x0003ffff]
[ 0.357032] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[ 0.357035] e820: reserve RAM buffer [mem 0x7ab60000-0x7bffffff]
[ 0.357039] e820: reserve RAM buffer [mem 0x7bd14000-0x7bffffff]
[ 0.357333] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.357341] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.359366] amd_nb: Cannot enumerate AMD northbridges
[ 0.359402] Switched to clocksource hpet
[ 0.370656] pnp: PnP ACPI init
[ 0.370687] ACPI: bus type PNP registered
[ 0.370795] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.371108] system 00:01: [io 0x0680-0x069f] has been reserved
[ 0.371115] system 00:01: [io 0x0400-0x047f] has been reserved
[ 0.371119] system 00:01: [io 0x0500-0x05fe] has been reserved
[ 0.371126] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.373837] system 00:02: [mem 0x91416000-0x91416fff] has been reserved
[ 0.373845] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.373966] system 00:03: [mem 0xe0000000-0xefffffff] could not be reserved
[ 0.373973] system 00:03: [mem 0xfea00000-0xfeafffff] has been reserved
[ 0.373978] system 00:03: [mem 0xfed01000-0xfed01fff] has been reserved
[ 0.373982] system 00:03: [mem 0xfed03000-0xfed03fff] has been reserved
[ 0.373987] system 00:03: [mem 0xfed06000-0xfed06fff] has been reserved
[ 0.373992] system 00:03: [mem 0xfed08000-0xfed09fff] could not be reserved
[ 0.373997] system 00:03: [mem 0xfed80000-0xfedbffff] could not be reserved
[ 0.374002] system 00:03: [mem 0xfed1c000-0xfed1cfff] has been reserved
[ 0.374007] system 00:03: [mem 0xfee00000-0xfeefffff] has been reserved
[ 0.374013] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.374619] pnp: PnP ACPI: found 4 devices
[ 0.374623] ACPI: bus type PNP unregistered
[ 0.385064] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
[ 0.385073] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
[ 0.385079] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000
[ 0.385110] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.385115] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.385119] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.385131] pci 0000:00:1c.0: BAR 14: assigned [mem 0x91500000-0x916fffff]
[ 0.385143] pci 0000:00:1c.0: BAR 15: assigned [mem 0x91700000-0x918fffff 64bit pref]
[ 0.385149] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
[ 0.385155] pci 0000:00:1c.0: PCI bridge to [bus 01]
[ 0.385160] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
[ 0.385169] pci 0000:00:1c.0: bridge window [mem 0x91500000-0x916fffff]
[ 0.385177] pci 0000:00:1c.0: bridge window [mem 0x91700000-0x918fffff 64bit pref]
[ 0.385187] pci 0000:00:1c.2: PCI bridge to [bus 02]
[ 0.385192] pci 0000:00:1c.2: bridge window [io 0xe000-0xefff]
[ 0.385201] pci 0000:00:1c.2: bridge window [mem 0x91300000-0x913fffff]
[ 0.385214] pci 0000:00:1c.3: PCI bridge to [bus 03]
[ 0.385222] pci 0000:00:1c.3: bridge window [mem 0x91200000-0x912fffff]
[ 0.385235] pci_bus 0000:00: resource 4 [io 0x0000-0x006f]
[ 0.385239] pci_bus 0000:00: resource 5 [io 0x0078-0x0cf7]
[ 0.385243] pci_bus 0000:00: resource 6 [io 0x0d00-0xffff]
[ 0.385247] pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff]
[ 0.385251] pci_bus 0000:00: resource 8 [mem 0x000c0000-0x000dffff]
[ 0.385255] pci_bus 0000:00: resource 9 [mem 0x000e0000-0x000fffff]
[ 0.385259] pci_bus 0000:00: resource 10 [mem 0x80000000-0xdfffffff]
[ 0.385264] pci_bus 0000:01: resource 0 [io 0x1000-0x1fff]
[ 0.385268] pci_bus 0000:01: resource 1 [mem 0x91500000-0x916fffff]
[ 0.385272] pci_bus 0000:01: resource 2 [mem 0x91700000-0x918fffff 64bit pref]
[ 0.385276] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
[ 0.385280] pci_bus 0000:02: resource 1 [mem 0x91300000-0x913fffff]
[ 0.385284] pci_bus 0000:03: resource 1 [mem 0x91200000-0x912fffff]
[ 0.385416] NET: Registered protocol family 2
[ 0.386029] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.386362] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.386737] TCP: Hash tables configured (established 65536 bind 65536)
[ 0.386817] TCP: reno registered
[ 0.386851] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.386937] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[ 0.387191] NET: Registered protocol family 1
[ 0.387231] pci 0000:00:02.0: Video device with shadowed ROM
[ 0.387722] PCI: CLS 0 bytes, default 64
[ 0.387837] Unpacking initramfs...
[ 0.916893] Freeing initrd memory: 15504K (ffff8800361a8000 - ffff8800370cc000)
[ 0.916957] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.916963] software IO TLB [mem 0x73bc1000-0x77bc1000] (64MB) mapped at [ffff880073bc1000-ffff880077bc0fff]
[ 0.917448] microcode: CPU0 sig=0x406c3, pf=0x1, revision=0x35e
[ 0.917461] microcode: CPU1 sig=0x406c3, pf=0x1, revision=0x35e
[ 0.917480] microcode: CPU2 sig=0x406c3, pf=0x1, revision=0x35e
[ 0.917500] microcode: CPU3 sig=0x406c3, pf=0x1, revision=0x35e
[ 0.917628] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 0.918303] audit: initializing netlink subsys (disabled)
[ 0.918345] audit: type=2000 audit(1493172448.916:1): initialized
[ 0.918999] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.919042] zbud: loaded
[ 0.919455] VFS: Disk quotas dquot_6.5.2
[ 0.919494] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.919603] msgmni has been set to 15846
[ 0.920323] alg: No test for stdrng (krng)
[ 0.920384] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.920494] io scheduler noop registered
[ 0.920500] io scheduler deadline registered
[ 0.920589] io scheduler cfq registered (default)
[ 0.920777] pcieport 0000:00:1c.0: irq 131 for MSI/MSI-X
[ 0.921148] pcieport 0000:00:1c.2: irq 132 for MSI/MSI-X
[ 0.921414] pcieport 0000:00:1c.3: irq 133 for MSI/MSI-X
[ 0.921590] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 0.921598] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 0.921635] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
[ 0.921639] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[ 0.921646] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
[ 0.921683] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[ 0.921688] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[ 0.921695] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
[ 0.921730] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.921803] pciehp 0000:00:1c.0:pcie04: Slot #0 AttnBtn- AttnInd- PwrInd- PwrCtrl- MRL- Interlock- NoCompl+ LLActRep+
[ 0.921861] pciehp 0000:00:1c.0:pcie04: service driver pciehp loaded
[ 0.921875] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.921926] efifb: probing for efifb
[ 0.921973] efifb: framebuffer at 0x80000000, mapped to 0xffffc90010f00000, using 8128k, total 8128k
[ 0.921977] efifb: mode is 1920x1080x32, linelength=7680, pages=1
[ 0.921978] efifb: scrolling: redraw
[ 0.921982] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.936684] Console: switching to colour frame buffer device 240x67
[ 0.951136] fb0: EFI VGA frame buffer device
[ 0.951156] intel_idle: does not run on family 6 model 76
[ 0.951236] GHES: HEST is not enabled!
[ 0.951413] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.971747] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[ 0.972539] Linux agpgart interface v0.103
[ 0.972761] i8042: PNP: No PS/2 controller found. Probing ports directly.
[ 0.998918] i8042: Detected active multiplexing controller, rev 1.1
[ 1.000688] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.000700] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.000723] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.000729] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.000732] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.001179] mousedev: PS/2 mouse device common for all mice
[ 1.001281] rtc_cmos 00:00: RTC can wake from S4
[ 1.001547] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
[ 1.001602] rtc_cmos 00:00: alarms up to one day, y3k, 242 bytes nvram, hpet irqs
[ 1.001626] Intel P-state driver initializing.
[ 1.001660] Intel pstate controlling: cpu 0
[ 1.001708] Intel pstate controlling: cpu 1
[ 1.001754] Intel pstate controlling: cpu 2
[ 1.001785] Intel pstate controlling: cpu 3
[ 1.002008] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.004580] AMD IOMMUv2 driver by Joerg Roedel <joerg.roedel@amd.com>
[ 1.004592] AMD IOMMUv2 functionality not available on this system
[ 1.005183] TCP: cubic registered
[ 1.005434] NET: Registered protocol family 10
[ 1.006742] mip6: Mobile IPv6
[ 1.006770] NET: Registered protocol family 17
[ 1.006817] mpls_gso: MPLS GSO support
[ 1.008932] registered taskstats version 1
[ 1.010709] rtc_cmos 00:00: setting system clock to 2017-04-26 02:07:29 UTC (1493172449)
[ 1.011485] PM: Hibernation image not present or could not be loaded.
[ 1.013364] Freeing unused kernel memory: 1208K (ffffffff818ef000 - ffffffff81a1d000)
[ 1.013371] Write protecting the kernel read-only data: 8192k
[ 1.014095] Freeing unused kernel memory: 888K (ffff880001722000 - ffff880001800000)
[ 1.015042] Freeing unused kernel memory: 216K (ffff8800019ca000 - ffff880001a00000)
[ 1.033994] systemd-udevd[71]: starting version 215
[ 1.034669] random: systemd-udevd: uninitialized urandom read (16 bytes read, 5 bits of entropy available)
[ 1.056216] sdhci: Secure Digital Host Controller Interface driver
[ 1.056223] sdhci: Copyright(c) Pierre Ossman
[ 1.057016] sdhci-acpi 80860F14:01: failed to setup card detect gpio
[ 1.058032] mmc0: no vqmmc regulator found
[ 1.058037] mmc0: no vmmc regulator found
[ 1.059711] mmc0: SDHCI controller on ACPI [80860F14:01] using ADMA
[ 1.062077] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.075104] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.077523] ACPI: bus type USB registered
[ 1.077610] usbcore: registered new interface driver usbfs
[ 1.077633] usbcore: registered new interface driver hub
[ 1.078033] usbcore: registered new device driver usb
[ 1.078079] SCSI subsystem initialized
[ 1.080012] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.080030] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[ 1.081206] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.081251] xhci_hcd 0000:00:14.0: irq 134 for MSI/MSI-X
[ 1.081757] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.081763] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.081766] usb usb1: Product: xHCI Host Controller
[ 1.081769] usb usb1: Manufacturer: Linux 3.16.0-4-amd64 xhci_hcd
[ 1.081772] usb usb1: SerialNumber: 0000:00:14.0
[ 1.082166] hub 1-0:1.0: USB hub found
[ 1.082197] hub 1-0:1.0: 7 ports detected
[ 1.083247] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.083260] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 1.083345] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.083349] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.083352] usb usb2: Product: xHCI Host Controller
[ 1.083355] usb usb2: Manufacturer: Linux 3.16.0-4-amd64 xhci_hcd
[ 1.083358] usb usb2: SerialNumber: 0000:00:14.0
[ 1.083708] hub 2-0:1.0: USB hub found
[ 1.083734] hub 2-0:1.0: 6 ports detected
[ 1.083851] r8169 0000:02:00.0: irq 135 for MSI/MSI-X
[ 1.084261] r8169 0000:02:00.0 eth0: RTL8168g/8111g at 0xffffc90000c7e000, 74:85:2a:1f:3e:bd, XID 0c000800 IRQ 135
[ 1.084267] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 1.084445] libata version 3.00 loaded.
[ 1.085720] ahci 0000:00:13.0: version 3.0
[ 1.086001] ahci 0000:00:13.0: irq 136 for MSI/MSI-X
[ 1.099427] ahci 0000:00:13.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 1.099435] ahci 0000:00:13.0: flags: 64bit ncq ilck pm led clo only pio slum part deso sadm apst
[ 1.100068] scsi0 : ahci
[ 1.100305] scsi1 : ahci
[ 1.100402] ata1: SATA max UDMA/133 abar m2048@0x91415000 port 0x91415100 irq 136
[ 1.100406] ata2: SATA max UDMA/133 abar m2048@0x91415000 port 0x91415180 irq 136
[ 1.149728] input: AT Raw Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.167509] atkbd serio0: Unknown key pressed (raw set 2, code 0x17c on isa0060/serio0).
[ 1.167514] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[ 1.364754] atkbd serio0: Unknown key pressed (raw set 2, code 0x17c on isa0060/serio0).
[ 1.364766] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[ 1.391385] usb 1-3: new high-speed USB device number 2 using xhci_hcd
[ 1.423405] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.426416] ata2.00: ATAPI: MATSHITA DVD-RAM UJ8HC, 1.00, max UDMA/100
[ 1.428859] ata2.00: configured for UDMA/100
[ 1.431420] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.432037] ata1.00: ATA-9: WDC WD5000LPVX-22V0TT0, 01.01A01, max UDMA/133
[ 1.432046] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.432689] ata1.00: configured for UDMA/133
[ 1.432897] scsi 0:0:0:0: Direct-Access ATA WDC WD5000LPVX-2 1A01 PQ: 0 ANSI: 5
[ 1.437213] scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ8HC 1.00 PQ: 0 ANSI: 5
[ 1.451852] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.451862] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.451984] sd 0:0:0:0: [sda] Write Protect is off
[ 1.451989] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.452040] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.462850] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.462860] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.463322] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.466027] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.466324] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.534162] sda: sda1 sda2 sda3
[ 1.534921] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.565612] atkbd serio0: Unknown key pressed (raw set 2, code 0x17c on isa0060/serio0).
[ 1.565619] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[ 1.575686] usb 1-3: New USB device found, idVendor=174f, idProduct=1756
[ 1.575691] usb 1-3: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 1.575694] usb 1-3: Product: USB Video Device
[ 1.575697] usb 1-3: Manufacturer: 201406250001
[ 1.575700] usb 1-3: SerialNumber: 200901010001
[ 1.691392] usb 1-5: new high-speed USB device number 3 using xhci_hcd
[ 1.764791] atkbd serio0: Unknown key pressed (raw set 2, code 0x17c on isa0060/serio0).
[ 1.764815] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[ 1.820755] usb 1-5: New USB device found, idVendor=05e3, idProduct=0610
[ 1.820762] usb 1-5: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 1.820766] usb 1-5: Product: USB2.0 Hub
[ 1.821488] hub 1-5:1.0: USB hub found
[ 1.821808] hub 1-5:1.0: 4 ports detected
[ 1.824925] PM: Starting manual resume from disk
[ 1.824934] PM: Hibernation image partition 8:3 present
[ 1.824937] PM: Looking for hibernation image.
[ 1.825136] PM: Image not found (code -22)
[ 1.825139] PM: Hibernation image not present or could not be loaded.
[ 1.915444] tsc: Refined TSC clocksource calibration: 1599.948 MHz
[ 1.964761] atkbd serio0: Unknown key pressed (raw set 2, code 0x17c on isa0060/serio0).
[ 1.964769] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[ 2.095396] usb 1-5.1: new low-speed USB device number 4 using xhci_hcd
[ 2.164750] atkbd serio0: Unknown key pressed (raw set 2, code 0x17c on isa0060/serio0).
[ 2.164773] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[ 2.187977] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 2.190020] usb 1-5.1: New USB device found, idVendor=04ca, idProduct=007d
[ 2.190028] usb 1-5.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.190033] usb 1-5.1: Product: USB wired keyboard
[ 2.190037] usb 1-5.1: Manufacturer: Liteon Technology Corp.
[ 2.190314] usb 1-5.1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 2.190330] usb 1-5.1: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 2.198651] usbcore: registered new interface driver usbhid
[ 2.198669] usbhid: USB HID core driver
[ 2.202144] input: Liteon Technology Corp. USB wired keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.1/1-5.1:1.0/0003:04CA:007D.0001/input/input5
[ 2.202397] hid-generic 0003:04CA:007D.0001: input,hidraw0: USB HID v1.11 Keyboard [Liteon Technology Corp. USB wired keyboard] on usb-0000:00:14.0-5.1/input0
[ 2.204043] input: Liteon Technology Corp. USB wired keyboard as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.1/1-5.1:1.1/0003:04CA:007D.0002/input/input6
[ 2.204362] hid-generic 0003:04CA:007D.0002: input,hidraw1: USB HID v1.11 Device [Liteon Technology Corp. USB wired keyboard] on usb-0000:00:14.0-5.1/input1
[ 2.263378] usb 1-5.2: new full-speed USB device number 5 using xhci_hcd
[ 2.352119] usb 1-5.2: No LPM exit latency info found, disabling LPM.
[ 2.353228] usb 1-5.2: New USB device found, idVendor=8087, idProduct=0a2a
[ 2.353235] usb 1-5.2: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.371064] atkbd serio0: Unknown key pressed (raw set 2, code 0x17c on isa0060/serio0).
[ 2.371072] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[ 2.423387] usb 1-5.3: new full-speed USB device number 6 using xhci_hcd
[ 2.513957] usb 1-5.3: New USB device found, idVendor=046d, idProduct=c534
[ 2.513965] usb 1-5.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.513968] usb 1-5.3: Product: USB Receiver
[ 2.513971] usb 1-5.3: Manufacturer: Logitech
[ 2.516373] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.3/1-5.3:1.0/0003:046D:C534.0003/input/input9
[ 2.516473] hid-generic 0003:046D:C534.0003: input,hidraw2: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:14.0-5.3/input0
[ 2.519054] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5.3/1-5.3:1.1/0003:046D:C534.0004/input/input10
[ 2.519284] hid-generic 0003:046D:C534.0004: input,hiddev0,hidraw3: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:14.0-5.3/input1
[ 2.568756] atkbd serio0: Unknown key pressed (raw set 2, code 0x17c on isa0060/serio0).
[ 2.568763] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[ 2.768736] atkbd serio0: Unknown key pressed (raw set 2, code 0x17c on isa0060/serio0).
[ 2.768743] atkbd serio0: Use 'setkeycodes 7c <keycode>' to make it known.
[ 2.897361] random: nonblocking pool is initialized
[ 2.915632] Switched to clocksource tsc
[ 3.033261] systemd[1]: systemd 215 running in system mode. (+PAM +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ -SECCOMP -APPARMOR)
[ 3.034512] systemd[1]: Detected architecture 'x86-64'.
[ 3.259800] systemd[1]: Inserted module 'autofs4'
[ 3.303813] systemd[1]: Set hostname to <EdgarGon>.
[ 5.318858] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[ 5.320437] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 5.320674] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 5.320727] systemd[1]: Starting Remote File Systems (Pre).
[ 5.320842] systemd[1]: Reached target Remote File Systems (Pre).
[ 5.320936] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 5.321076] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 5.321123] systemd[1]: Starting Encrypted Volumes.
[ 5.321172] systemd[1]: Reached target Encrypted Volumes.
[ 5.321257] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 5.321563] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 5.321624] systemd[1]: Expecting device dev-sda3.device...
[ 5.321676] systemd[1]: Expecting device dev-disk-by\x2duuid-f0e088c7\x2dee31\x2d46af\x2d8e81\x2d1ef6c0787189.device...
[ 5.321732] systemd[1]: Expecting device dev-disk-by\x2duuid-AEB6\x2dC839.device...
[ 5.321783] systemd[1]: Starting Root Slice.
[ 5.321881] systemd[1]: Created slice Root Slice.
[ 5.321928] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 5.322072] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 5.322119] systemd[1]: Starting Delayed Shutdown Socket.
[ 5.322237] systemd[1]: Listening on Delayed Shutdown Socket.
[ 5.322285] systemd[1]: Starting Journal Socket (/dev/log).
[ 5.322414] systemd[1]: Listening on Journal Socket (/dev/log).
[ 5.322476] systemd[1]: Starting udev Control Socket.
[ 5.322582] systemd[1]: Listening on udev Control Socket.
[ 5.322642] systemd[1]: Starting udev Kernel Socket.
[ 5.322728] systemd[1]: Listening on udev Kernel Socket.
[ 5.322776] systemd[1]: Starting User and Session Slice.
[ 5.322941] systemd[1]: Created slice User and Session Slice.
[ 5.323007] systemd[1]: Starting Journal Socket.
[ 5.323156] systemd[1]: Listening on Journal Socket.
[ 5.323291] systemd[1]: Starting System Slice.
[ 5.323440] systemd[1]: Created slice System Slice.
[ 5.323496] systemd[1]: Starting system-systemd\x2dfsck.slice.
[ 5.323696] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 5.323794] systemd[1]: Starting Increase datagram queue length...
[ 5.355009] systemd[1]: Started Set Up Additional Binary Formats.
[ 5.355218] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 5.356316] systemd[1]: Mounting Huge Pages File System...
[ 5.385556] systemd[1]: Starting Load Kernel Modules...
[ 5.386732] systemd[1]: Mounting Debug File System...
[ 5.387795] systemd[1]: Mounting POSIX Message Queue File System...
[ 5.388779] systemd[1]: Starting udev Coldplug all Devices...
[ 5.389821] systemd[1]: Starting system-getty.slice.
[ 5.389989] systemd[1]: Created slice system-getty.slice.
[ 5.390049] systemd[1]: Started File System Check on Root Device.
[ 5.390103] systemd[1]: Starting Slices.
[ 5.390127] systemd[1]: Reached target Slices.
[ 5.552135] systemd[1]: Started Create list of required static device nodes for the current kernel.
[ 5.552625] systemd[1]: Starting Create Static Device Nodes in /dev...
[ 5.674397] systemd[1]: Started udev Coldplug all Devices.
[ 5.953495] lp: driver loaded but no devices found
[ 5.994682] systemd[1]: Mounted POSIX Message Queue File System.
[ 5.994922] systemd[1]: Mounted Debug File System.
[ 5.995105] systemd[1]: Mounted Huge Pages File System.
[ 5.997717] systemd[1]: Started Increase datagram queue length.
[ 5.998056] ppdev: user-space parallel port driver
[ 6.041734] systemd[1]: Starting Syslog Socket.
[ 6.041981] systemd[1]: Listening on Syslog Socket.
[ 6.042097] systemd[1]: Starting Journal Service...
[ 6.045223] systemd[1]: Started Journal Service.
[ 6.195457] fuse init (API version 7.23)
[ 6.494836] systemd-udevd[192]: starting version 215
[ 8.048995] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[ 8.122531] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input13
[ 8.122563] ACPI: Power Button [PWRB]
[ 8.122924] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input14
[ 8.122948] ACPI: Sleep Button [SLPB]
[ 8.123411] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input15
[ 8.123434] ACPI: Power Button [PWRF]
[ 8.177577] Monitor-Mwait will be used to enter C-1 state
[ 8.177611] Monitor-Mwait will be used to enter C-2 state
[ 8.177632] Monitor-Mwait will be used to enter C-3 state
[ 8.177677] ACPI: acpi_idle registered with cpuidle
[ 8.367048] EFI Variables Facility v0.08 2004-May-17
[ 8.429023] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 8.435401] wmi: Mapper loaded
[ 8.470958] input: PC Speaker as /devices/platform/pcspkr/input/input16
[ 8.584559] [drm] Initialized drm 1.1.0 20060810
[ 8.665579] pstore: Registered efi as persistent store backend
[ 8.855523] [drm] This hardware requires preliminary hardware support.
See CONFIG_DRM_I915_PRELIMINARY_HW_SUPPORT, and/or modparam preliminary_hw_support
[ 9.048756] snd_hda_intel 0000:00:1b.0: irq 137 for MSI/MSI-X
[ 9.169122] alg: No test for crc32 (crc32-pclmul)
[ 9.319197] cfg80211: Call
Si todo lo que mencionas te dejó de funcionar al mismo tiempo lo mas probable es que hayas actualizado el núcleo y esta sea la raíz de esos problemas. Por ejemplo 'iwlwifi 0000:03:00.0: firmware: failed to load iwlwifi-7265-9.ucode (-2)' te está diciendo que no puede cargar ese ucode, lo mas probable es que tengas el ucode viejo en vez del que necesitas. Comprueba si haz instalado otro kernel en el log de dpkg y si es así entra con el viejo a ver si todo te funciona.
# grep linux-image-* /var/log/dpkg.log
EDIT: La versión que tienes (3.16.0-4) creo que ya tiene su tiempo, así que a no ser que llevases sin actualizar años dudo que sea eso...pero bueno, es lo único que se me ocurre que pueda causar todos esos problemas de un día para otro. Si no ha sido eso te va a tocar depurar los problemas uno a uno.
Pues mira dato000, la verdad es que se muy poco de debian bueno linux como tal, y creo yo que es parte del aprendizaje cometer errores, así que tu comentario super sofisticado no le encuentro sentido, (bueno al insulto), pero bueno lo único que hice fue lo que dijiste, tomar mi dvd de debian 8 y volver a mi versión estable..... :-*