Ayuda con una placa de red widi Alfa network AWUS036H

[damian_cap28]

Hola a todos, buenas tardes. Tengo una Compaq presario v3918 LA, con el disco particionado en dos partes. En una corre win 7 y en la otra bt 5 R1, la pregunta es como hago ahora para poner en modo minitor mi placa Alfa AWUS036H rtl8187?? por que con todo lo googleado no puedo puedo conseguir. Gracias...


root@bt:~# lsb_release -a
No LSB modules are available.
Distributor ID:   Ubuntu
Description:   Ubuntu 10.04.3 LTS
Release:   10.04
Codename:   lucid

root@bt:~# uname -r
2.6.32-21-generic




root@bt:~# lspci
00:00.0 RAM memory: nVidia Corporation MCP67 Memory Controller (rev a2)
00:01.0 ISA bridge: nVidia Corporation MCP67 ISA Bridge (rev a2)
00:01.1 SMBus: nVidia Corporation MCP67 SMBus (rev a2)
00:01.2 RAM memory: nVidia Corporation MCP67 Memory Controller (rev a2)
00:01.3 Co-processor: nVidia Corporation MCP67 Co-processor (rev a2)
00:02.0 USB Controller: nVidia Corporation MCP67 OHCI USB 1.1 Controller (rev a2)
00:02.1 USB Controller: nVidia Corporation MCP67 EHCI USB 2.0 Controller (rev a2)
00:04.0 USB Controller: nVidia Corporation MCP67 OHCI USB 1.1 Controller (rev a2)
00:04.1 USB Controller: nVidia Corporation MCP67 EHCI USB 2.0 Controller (rev a2)
00:06.0 IDE interface: nVidia Corporation MCP67 IDE Controller (rev a1)
00:08.0 PCI bridge: nVidia Corporation MCP67 PCI Bridge (rev a2)
00:09.0 IDE interface: nVidia Corporation MCP67 AHCI Controller (rev a2)
00:0a.0 Ethernet controller: nVidia Corporation MCP67 Ethernet (rev a2)
00:0c.0 PCI bridge: nVidia Corporation MCP67 PCI Express Bridge (rev a2)
00:0d.0 PCI bridge: nVidia Corporation MCP67 PCI Express Bridge (rev a2)
00:12.0 VGA compatible controller: nVidia Corporation C67 [GeForce 7150M / nForce 630M] (rev a2)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:09.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05)
01:09.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22)
01:09.2 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev 12)
01:09.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12)
01:09.4 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev ff)
08:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g (rev 01)

root@bt:~# lsusb
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 007: ID 1c4f:0003 SiGma Micro
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 004: ID 0bda:8187 Realtek Semiconductor Corp. RTL8187 Wireless Adapter
Bus 001 Device 003: ID 04f2:b016 Chicony Electronics Co., Ltd VGA 30fps UVC Webcam
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

root@bt:~# dmesg | tail -20
[   57.461976] [TTM] Zone highmem: Available graphics memory: 998164 kiB.
[   57.461990] [drm] nouveau 0000:00:12.0: 64 MiB VRAM
[   57.462815] [drm] nouveau 0000:00:12.0: 64 MiB GART (aperture)
[   57.463120] [drm] nouveau 0000:00:12.0: Allocating FIFO number 0
[   57.463401] [drm] nouveau 0000:00:12.0: nouveau_channel_alloc: initialised FIFO 0
[   57.463537] [drm] nouveau 0000:00:12.0: nouveau_channel_free: freeing fifo 0
[   57.464568] [TTM] Zone  kernel: Used memory at exit: 0 kiB.
[   57.464574] [TTM] Zone highmem: Used memory at exit: 0 kiB.
[   57.776059] usb 3-2: new low speed USB device using ohci_hcd and address 6
[   57.989892] usb 3-2: configuration #1 chosen from 1 choice
[   58.000092] input: SIGMACHIP Usb Mouse as /devices/pci0000:00/0000:00:02.0/usb3/3-2/3-2:1.0/input/input14
[   58.000220] generic-usb 0003:1C4F:0003.0005: input,hidraw0: USB HID v1.10 Mouse [SIGMACHIP Usb Mouse] on usb-0000:00:02.0-2/input0
[   93.004039] Clocksource tsc unstable (delta = -301060337 ns)
[ 3604.055162] usb 3-2: USB disconnect, address 6
[ 4893.564062] usb 3-2: new low speed USB device using ohci_hcd and address 7
[ 4893.777351] usb 3-2: configuration #1 chosen from 1 choice
[ 4893.787899] input: SIGMACHIP Usb Mouse as /devices/pci0000:00/0000:00:02.0/usb3/3-2/3-2:1.0/input/input15
[ 4893.788276] generic-usb 0003:1C4F:0003.0006: input,hidraw0: USB HID v1.10 Mouse [SIGMACHIP Usb Mouse] on usb-0000:00:02.0-2/input0
[ 7800.832521] eth0: link down.
[ 8022.719144] eth0: link up.

root@bt:~# iwconfig
lo        no wireless extensions.

eth0      no wireless extensions.

wlan0     IEEE 802.11g  ESSID:off/any 
          Mode:Managed  Frequency:2.462 GHz  Access Point: Not-Associated   
          Bit Rate:54 Mb/s   Tx-Power:32 dBm   
          RTS thr:2347 B   Fragment thr:2346 B   
          Encryption key:off
          Power Management:off
          Link Quality:0  Signal level:0  Noise level:0
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:0  Invalid misc:0   Missed beacon:0

PD: si se requieren algun otro dato solo pidanlo y grax a todos.

[ChimoC]

Buenas:

airmon-ng start wlan0

Un saludo

ChimoC

[damian_cap28]

Hola ChimoC...buenas noches nuevamente. Antes que nada gracias por tu pronta respuesta. Te cuento, que me compre la alfa network awus036h por que despues de más de un año de luchar, para que me la reconozca el backtrack a la broadcom. (08:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g) me di por vencido y termine consiguiendolo haciendo pruebas, para la que me reconozca la Alfa. ja ja ja Es el colmo... Pero bueno e aprendido mucho gracias a la broadcom y sus caprichos. Ahora tengo un nuevo problemita. A ver si me podes dar una mano. Con la vendita Alfa.
tengo la Alfa por Usb y la broadcom Pci
Te paso los datos:

root@bt:~# uname -r
2.6.32-34-generic
root@bt:~# lsb_release -a
No LSB modules are available.
Distributor ID:   Ubuntu
Description:   Ubuntu 10.04.3 LTS
Release:   10.04
Codename:   lucid
root@bt:~# lsusb
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 003: ID 1c4f:0003 SiGma Micro
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 004: ID 0bda:8187 Realtek Semiconductor Corp. RTL8187 Wireless Adapter
Bus 001 Device 003: ID 04f2:b016 Chicony Electronics Co., Ltd VGA 30fps UVC Webcam
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
root@bt:~# lspci
00:00.0 RAM memory: nVidia Corporation MCP67 Memory Controller (rev a2)
00:01.0 ISA bridge: nVidia Corporation MCP67 ISA Bridge (rev a2)
00:01.1 SMBus: nVidia Corporation MCP67 SMBus (rev a2)
00:01.2 RAM memory: nVidia Corporation MCP67 Memory Controller (rev a2)
00:01.3 Co-processor: nVidia Corporation MCP67 Co-processor (rev a2)
00:02.0 USB Controller: nVidia Corporation MCP67 OHCI USB 1.1 Controller (rev a2)
00:02.1 USB Controller: nVidia Corporation MCP67 EHCI USB 2.0 Controller (rev a2)
00:04.0 USB Controller: nVidia Corporation MCP67 OHCI USB 1.1 Controller (rev a2)
00:04.1 USB Controller: nVidia Corporation MCP67 EHCI USB 2.0 Controller (rev a2)
00:06.0 IDE interface: nVidia Corporation MCP67 IDE Controller (rev a1)
00:07.0 Audio device: nVidia Corporation MCP67 High Definition Audio (rev a1)
00:08.0 PCI bridge: nVidia Corporation MCP67 PCI Bridge (rev a2)
00:09.0 IDE interface: nVidia Corporation MCP67 AHCI Controller (rev a2)
00:0a.0 Ethernet controller: nVidia Corporation MCP67 Ethernet (rev a2)
00:0c.0 PCI bridge: nVidia Corporation MCP67 PCI Express Bridge (rev a2)
00:0d.0 PCI bridge: nVidia Corporation MCP67 PCI Express Bridge (rev a2)
00:12.0 VGA compatible controller: nVidia Corporation C67 [GeForce 7150M / nForce 630M] (rev a2)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
01:09.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05)
01:09.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22)
01:09.2 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev 12)
01:09.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12)
01:09.4 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev ff)
08:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g (rev 01)
root@bt:~# dmesg | tail -20
[ 1485.229074] hub 2-0:1.0: unable to enumerate USB device on port 5
[ 1485.532076] hub 2-0:1.0: unable to enumerate USB device on port 5
[ 1485.837107] hub 2-0:1.0: unable to enumerate USB device on port 5
[ 1486.137098] hub 2-0:1.0: unable to enumerate USB device on port 5
[ 1486.440073] hub 2-0:1.0: unable to enumerate USB device on port 5
[ 1486.740072] hub 2-0:1.0: unable to enumerate USB device on port 5
[ 1487.040098] hub 2-0:1.0: unable to enumerate USB device on port 5
[ 1487.340046] hub 2-0:1.0: unable to enumerate USB device on port 5
[ 1487.640074] hub 2-0:1.0: unable to enumerate USB device on port 5
[ 1487.941081] hub 2-0:1.0: unable to enumerate USB device on port 5
[ 1488.241063] hub 2-0:1.0: unable to enumerate USB device on port 5
[ 1488.540109] hub 2-0:1.0: unable to enumerate USB device on port 5
[ 1488.840080] hub 2-0:1.0: unable to enumerate USB device on port 5
[ 1489.140071] hub 2-0:1.0: unable to enumerate USB device on port 5
[ 1489.440066] hub 2-0:1.0: unable to enumerate USB device on port 5
[ 1489.740080] hub 2-0:1.0: unable to enumerate USB device on port 5
[ 1490.041090] hub 2-0:1.0: unable to enumerate USB device on port 5
[ 1490.341068] hub 2-0:1.0: unable to enumerate USB device on port 5
[ 1490.641066] hub 2-0:1.0: unable to enumerate USB device on port 5
[ 1490.940075] hub 2-0:1.0: unable to enumerate USB device on port 5

root@bt:~# airmon-ng start wlan1


Found 5 processes that could cause trouble.
If airodump-ng, aireplay-ng or airtun-ng stops working after
a short period of time, you may want to kill (some of) them!

PID   Name
1918   dhclient3
2005   dhclient3
2198   wpa_supplicant
2204   dhclient
2222   dhclient
Process with PID 2005 (dhclient3) is running on interface wlan0
Process with PID 2198 (wpa_supplicant) is running on interface wlan0
Process with PID 2222 (dhclient) is running on interface wlan0


Interface   Chipset      Driver

wlan0      Unknown      ndiswrapper

""Aca termino todos estos procesos, para que no haya problemas pero dice lo siguiente.""

root@bt:~# iwconfig
lo        no wireless extensions.

eth0      no wireless extensions.

wlan0     IEEE 802.11g  ESSID:off/any 
          Mode:Managed  Frequency:2.437 GHz  Access Point: Not-Associated   
          Bit Rate:54 Mb/s   Tx-Power:32 dBm   
          RTS thr:2347 B   Fragment thr:2346 B   
          Encryption key:off
          Power Management:off
          Link Quality:98/100  Signal level:-33 dBm  Noise level:-96 dBm
          Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0
          Tx excessive retries:0  Invalid misc:0   Missed beacon:0

me reconoce nada mas que la broadcom y de la Alfa nada.

En las pruebas de ayer. segui estas intrucciones para la alfa y si me reconocia a las dos e inclusive la alfa entraba en monitor mode. pero al reiniciar tenia que poner modprobe r8781 de nuevo. y hoy amanecio loca de nuevo. Lo unico que me llamaba la atencion la Alfa ayer era que que en el wicd todas señales estaban en rojo -1 (sin señal) en modo managed

1. sudo rmmod r8187 rtl8187 mac80211 cfg80211
2. sudo mkdir /usr/src/drivers
3. cd /usr/src/drivers
4. sudo wget http://dl.aircrack-ng.org/drivers/rtl8187_linux_26.1010.zip
5. sudo unzip rtl8187_linux_26.1010.zip
6. cd rtl8187_linux_26.1010.0622.2006/
7. sudo wget http://patches.aircrack-ng.org/rtl8187_2.6.27.patch
8. sudo wget http://patches.aircrack-ng.org/rtl8187_2.6.32.patch
9. sudo tar xzf drv.tar.gz
10. sudo tar xzf stack.tar.gz
11. sudo patch -Np1 -i rtl8187_2.6.27.patch
12. sudo patch -Np1 -i rtl8187_2.6.32.patch
13. sudo make
14. sudo make install
15. sudo modprobe r8187
Bueno hasta aca, venia barbaro pero hoy a probar la misma tecnica fallo. Que opinas que puede ser. ??
Gracias por tu tiempo a vos y a todo este grupo de gente maravillosa. Que cada dia me hacen sentir mas parte de ustedes. Gracias por eso tambien.