¿Puedo convertir mi grabadora de DVD LG GSA-4040B en una doble capa

[djherranz]

Hola tengo una grabadora de dvd de LG GSA-4040B y me han dicho que existe la posibilidad de convertirla en una para grabar DVD's de doble capa . Si es cierto, ¿ cómo lo puedo hacer?. Me podeis decir tambien si existe la posibilidad para grabar a 8x con la mia que es a 4x ( DVD-R ).

[Cobac]

eso se hace actualizando el firmware de la grabadora, sobre lo de grabar dvds de doble capa no he leido nada, pero algo sale para grabar a 8x:

Improvement Point:
Supports 4X speed for LG DVD-R 8X Media and
improves the readability for 8cm DVD-R/RW media.

http://es.lgservice.com/jsp/common/download.jsp?DOC_ID=KRSWL000012874&FILE_NAME=KRSWL000012874-b1-a1.zip&ORIGINAL_NAME_b1_a1=GSA-4040A304(ew).zip&FILE_GUBUN=B

ahi tienes la dirección para bajartelo

y aquí las instrucciones de como instalar un firmware nuevo:

¡Ø INSTRUCIONS

GSA-4040B Version A304 Firmware Update
To update the firmware of the GSA-4040B please refer to the following instructions:

Note: Not following the subsequent update instructions explicitly will result in
permanent damage to your drive, for which LG will not be responsible.

This firmware update is for drives with original firmware versions below A303.
The drives must be original LG branded drives with the DVD Writer
model number GSA-4040B(no OEM units).

If you have an OEM unit, branded with another manufacturers name,
please contact that manufacturer for support and firmware updates.

This firmware update is for use only on PC¡¯s with Windows XP, Windows 2000,
Windows Millennium Edition (ME), or Windows 98.

¡Ø Critical Instructions: (to be followed carefully)

1. Connect the drive as ¡°master¡± by it self, on the secondary IDE controller
with no other device on the same IDE cable, making note to set the jumper
on the back of the drive to the ¡°master¡± position.
2. Download the file GSA-4040A304(EW).ZIP to a folder of your choice.
This download includes this "Read me(ew)" text file, as well as the GSA4040A304.EXE program,
which will auto-update your drive¡¯s firmware.
3. Close all other programs including: screen saber, antivirus and/or power-down programs.
(If these programs are not closed, they will try to engage the PC, during the update process,
thus interrupting the update and damaging the drive).
4. Check the drive to ensure that there is no disk in the tray
before you start the update procedure.

5. Go into the folder with the update file and double click the GSA4040A304.EXE program
and click the ¡°update¡± button (red). Once the update is complete,
you will see ¡°Firmware Update Complete¡± and the button will become green
and advise you to reboot the system.

¡Ø You will need to reboot your PC

The update will be complete, after you reboot your system.

WARNING:
Do not open any programs or start any system functions during the update,
as they will interfere with data transfer and damage the drive.
Do not cancel the operation once it has been started or the drive will
become permanently damaged, as a result.

salu2