problema, tengo conexión intermitente"

<[(x)]> · 29 Mayo 2012, 01:39 AM

holas, no se que tan común sera este problema. Me lo he topado en mis comienzos con gnu/linux pero al tener mínimos conocimientos la pésima solución fu formatear.

El temas es el siguiente mi equipo (so : debian estable) obtiene la dirección ip y funciona correctamente por unos segundos, minutos. Luego no obtiene respuesta de ningún host remoto (haciendo ping o diversas cosas).

ej: el ping seria responde res res res res res, no responde nores nores red desconecata bla bla...

les dejo aaca mi dmesg:[code][ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.32-5-amd64 (Debian 2.6.32-45) (dannf@debian.org) (gcc version 4.3.5 (Debian 4.3.5-4) ) #1 SMP Sun May 6 04:00:17 UTC 2012
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-amd64 root=UUID=b6f3af2a-5783-4c87-96ef-25334d92c8d1 ro quiet
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Centaur CentaurHauls
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 00000000cfdf0000 (usable)
[ 0.000000] BIOS-e820: 00000000cfdf0000 - 00000000cfdf1000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000cfdf1000 - 00000000cfe00000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000cfe00000 - 00000000cff00000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
[ 0.000000] DMI 2.4 present.
[ 0.000000] last_pfn = 0x130000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-C7FFF write-protect
[ 0.000000] C8000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000000 mask FFFF80000000 write-back
[ 0.000000] 1 base 000080000000 mask FFFFC0000000 write-back
[ 0.000000] 2 base 0000C0000000 mask FFFFF0000000 write-back
[ 0.000000] 3 base 0000CFE00000 mask FFFFFFE00000 uncachable
[ 0.000000] 4 base 000100000000 mask FFFFE0000000 write-back
[ 0.000000] 5 base 000120000000 mask FFFFF0000000 write-back
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000130000000 aka 4864M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000cfe00000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xcfdf0 max_arch_pfn = 0x400000000
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: 0000000000000000-00000000cfdf0000
[ 0.000000] 0000000000 - 00c0000000 page 1G
[ 0.000000] 00c0000000 - 00cfc00000 page 2M
[ 0.000000] 00cfc00000 - 00cfdf0000 page 4k
[ 0.000000] kernel direct mapping tables up to cfdf0000 @ 8000-b000
[ 0.000000] init_memory_mapping: 0000000100000000-0000000130000000
[ 0.000000] 0100000000 - 0130000000 page 2M
[ 0.000000] kernel direct mapping tables up to 130000000 @ a000-c000
[ 0.000000] RAMDISK: 376fa000 - 37fef0c8
[ 0.000000] ACPI: RSDP 00000000000f7500 00014 (v00 GBT )
[ 0.000000] ACPI: RSDT 00000000cfdf1000 00040 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: FACP 00000000cfdf1080 00074 (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: DSDT 00000000cfdf1100 064E8 (v01 GBT GBTUACPI 00001000 MSFT 03000000)
[ 0.000000] ACPI: FACS 00000000cfdf0000 00040
[ 0.000000] ACPI: SSDT 00000000cfdf76c0 0088C (v01 PTLTD POWERNOW 00000001 LTP 00000001)
[ 0.000000] ACPI: HPET 00000000cfdf7f80 00038 (v01 GBT GBTUACPI 42302E31 GBTU 00000098)
[ 0.000000] ACPI: MCFG 00000000cfdf7fc0 0003C (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: MATS 00000000cfdf8000 00034 (v01 GBT 00000000 00000000)
[ 0.000000] ACPI: TAMG 00000000cfdf8070 001A2 (v01 GBT GBT B0 5455312E BG?? 00000101)
[ 0.000000] ACPI: APIC 00000000cfdf7600 000BC (v01 GBT GBTUACPI 42302E31 GBTU 01010101)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] Scanning NUMA topology in Northbridge 24
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-0000000130000000
[ 0.000000] Bootmem setup node 0 0000000000000000-0000000130000000
[ 0.000000] NODE_DATA [000000000000b000 - 0000000000012fff]
[ 0.000000] bootmap [0000000000013000 - 0000000000038fff] pages 26
[ 0.000000] (8 early reservations) ==> bootmem [0000000000 - 0130000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
[ 0.000000] #1 [0000006000 - 0000008000] TRAMPOLINE ==> [0000006000 - 0000008000]
[ 0.000000] #2 [0001000000 - 00016d95c4] TEXT DATA BSS ==> [0001000000 - 00016d95c4]
[ 0.000000] #3 [00376fa000 - 0037fef0c8] RAMDISK ==> [00376fa000 - 0037fef0c8]
[ 0.000000] #4 [000009f800 - 0000100000] BIOS reserved ==> [000009f800 - 0000100000]
[ 0.000000] #5 [00016da000 - 00016da0fe] BRK ==> [00016da000 - 00016da0fe]
[ 0.000000] #6 [0000008000 - 000000a000] PGTABLE ==> [0000008000 - 000000a000]
[ 0.000000] #7 [000000a000 - 000000b000] PGTABLE ==> [000000a000 - 000000b000]
[ 0.000000] found SMP MP-table at [ffff8800000f5af0] f5af0
[ 0.000000] [ffffea0000000000-ffffea00043fffff] PMD -> [ffff880001800000-ffff8800051fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000000 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x00130000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[3] active PFN ranges
[ 0.000000] 0: 0x00000000 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x000cfdf0
[ 0.000000] 0: 0x00100000 -> 0x00130000
[ 0.000000] On node 0 totalpages: 1047951
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 102 pages reserved
[ 0.000000] DMA zone: 3841 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 14280 pages used for memmap
[ 0.000000] DMA32 zone: 833064 pages, LIFO batch:31
[ 0.000000] Normal zone: 2688 pages used for memmap
[ 0.000000] Normal zone: 193920 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x05] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x06] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x07] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 8, version 33, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 24
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000cfdf0000 - 00000000cfdf1000
[ 0.000000] PM: Registered nosave memory: 00000000cfdf1000 - 00000000cfe00000
[ 0.000000] PM: Registered nosave memory: 00000000cfe00000 - 00000000cff00000
[ 0.000000] PM: Registered nosave memory: 00000000cff00000 - 00000000e0000000
[ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at cff00000 (gap: cff00000:10100000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 30 pages/cpu @ffff880005400000 s90328 r8192 d24360 u262144
[ 0.000000] pcpu-alloc: s90328 r8192 d24360 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc:

0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1030825
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-5-amd64 root=UUID=b6f3af2a-5783-4c87-96ef-25334d92c8d1 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Node 0: aperture @ 20000000 size 32 MB
[ 0.000000] Aperture pointing to e820 RAM. Ignoring.
[ 0.000000] Your BIOS doesn't leave a aperture memory hole
[ 0.000000] Please enable the IOMMU option in the BIOS setup
[ 0.000000] This costs you 64 MB of RAM
[ 0.000000] Mapping aperture over 65536 KB of RAM @ 20000000
[ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000024000000
[ 0.000000] Memory: 4049284k/4980736k available (3083k kernel code, 788932k absent, 142520k reserved, 2048k data, 592k init)
[ 0.000000] SLUB: Genslabs=14, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:472
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 3214.431 MHz processor.
[ 0.008004] Calibrating delay loop (skipped), value calculated using timer frequency.. 6428.85 BogoMIPS (lpj=12857704)
[ 0.008019] Security Framework initialized
[ 0.008022] SELinux: Disabled at boot.
[ 0.008215] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.009500] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.010110] Mount-cache hash table entries: 256
[ 0.010205] Initializing cgroup subsys ns
[ 0.010208] Initializing cgroup subsys cpuacct
[ 0.010210] Initializing cgroup subsys devices
[ 0.010212] Initializing cgroup subsys freezer
[ 0.010213] Initializing cgroup subsys net_cls
[ 0.010228] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.010230] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.010232] CPU 0/0x0 -> Node 0
[ 0.010234] tseg: 00cff00000
[ 0.010235] CPU: Physical Processor ID: 0
[ 0.010236] CPU: Processor Core ID: 0
[ 0.010238] mce: CPU supports 6 MCE banks
[ 0.010245] Performance Events: AMD PMU driver.
[ 0.010248] ... version: 0
[ 0.010249] ... bit width: 48
[ 0.010250] ... generic registers: 4
[ 0.010251] ... value mask: 0000ffffffffffff
[ 0.010252] ... max period: 00007fffffffffff
[ 0.010253] ... fixed-purpose events: 0
[ 0.010254] ... event mask: 000000000000000f
[ 0.012211] ACPI: Core revision 20090903
[ 0.020068] Setting APIC routing to flat
[ 0.024418] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.067836] CPU0: AMD Phenom(tm) II X4 955 Processor stepping 02
[ 0.068001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.012000] Initializing CPU#1
[ 0.012000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.012000] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.012000] CPU 1/0x1 -> Node 0
[ 0.012000] CPU: Physical Processor ID: 0
[ 0.012000] CPU: Processor Core ID: 1
[ 0.152084] CPU1: AMD Phenom(tm) II X4 955 Processor stepping 02
[ 0.152090] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.156048] Booting processor 2 APIC 0x2 ip 0x6000
[ 0.012000] Initializing CPU#2
[ 0.012000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.012000] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.012000] CPU 2/0x2 -> Node 0
[ 0.012000] CPU: Physical Processor ID: 0
[ 0.012000] CPU: Processor Core ID: 3
[ 0.244105] CPU2: AMD Phenom(tm) II X4 955 Processor stepping 02
[ 0.244110] checking TSC synchronization [CPU#0 -> CPU#2]: passed.
[ 0.248041] Booting processor 3 APIC 0x3 ip 0x6000
[ 0.012000] Initializing CPU#3
[ 0.012000] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 0.012000] CPU: L2 Cache: 512K (64 bytes/line)
[ 0.012000] CPU 3/0x3 -> Node 0
[ 0.012000] CPU: Physical Processor ID: 0
[ 0.012000] CPU: Processor Core ID: 2
[ 0.336018] CPU3: AMD Phenom(tm) II X4 955 Processor stepping 02
[ 0.336022] checking TSC synchronization [CPU#0 -> CPU#3]: passed.
[ 0.340010] Brought up 4 CPUs
[ 0.340012] Total of 4 processors activated (25714.12 BogoMIPS).
[ 0.342319] CPU0 attaching sched-domain:
[ 0.342322] domain 0: span 0-3 level MC
[ 0.342324] groups: group ffff88000540fbf0 cpus 0 group ffff88000544fbf0 cpus 1 group ffff88000548fbf0 cpus 2 group ffff8800054cfbf0 cpus 3
[ 0.342331] CPU1 attaching sched-domain:
[ 0.342332] domain 0: span 0-3 level MC
[ 0.342333] groups: group ffff88000544fbf0 cpus 1 group ffff88000548fbf0 cpus 2 group ffff8800054cfbf0 cpus 3 group ffff88000540fbf0 cpus 0
[ 0.342338] CPU2 attaching sched-domain:
[ 0.342339] domain 0: span 0-3 level MC
[ 0.342340] groups: group ffff88000548fbf0 cpus 2 group ffff8800054cfbf0 cpus 3 group ffff88000540fbf0 cpus 0 group ffff88000544fbf0 cpus 1
[ 0.342345] CPU3 attaching sched-domain:
[ 0.342346] domain 0: span 0-3 level MC
[ 0.342347] groups: group ffff8800054cfbf0 cpus 3 group ffff88000540fbf0 cpus 0 group ffff88000544fbf0 cpus 1 group ffff88000548fbf0 cpus 2
[ 0.342419] devtmpfs: initialized
[ 0.344874] regulator: core version 0.5
[ 0.344874] NET: Registered protocol family 16
[ 0.344874] node 0 link 0: io port [b000, ffff]
[ 0.344874] TOM: 00000000d0000000 aka 3328M
[ 0.344874] Fam 10h mmconf [e0000000, e00fffff]
[ 0.344874] node 0 link 0: mmio [a0000, bffff]
[ 0.344874] node 0 link 0: mmio [d0000000, dfffffff]
[ 0.344874] node 0 link 0: mmio [f0000000, fe02ffff]
[ 0.344874] node 0 link 0: mmio [e0000000, e04fffff] ==> [e0100000, e04fffff]
[ 0.344874] TOM2: 0000000130000000 aka 4864M
[ 0.344874] bus: [00,04] on node 0 link 0
[ 0.344874] bus: 00 index 0 io port: [0, ffff]
[ 0.344874] bus: 00 index 1 mmio: [a0000, bffff]
[ 0.344874] bus: 00 index 2 mmio: [d0000000, dfffffff]
[ 0.344874] bus: 00 index 3 mmio: [e0500000, ffffffff]
[ 0.344874] bus: 00 index 4 mmio: [e0100000, e04fffff]
[ 0.344874] bus: 00 index 5 mmio: [130000000, fcffffffff]
[ 0.344874] ACPI: bus type pci registered
[ 0.344874] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.344874] PCI: MCFG area at e0000000 reserved in E820
[ 0.349994] PCI: Using MMCONFIG at e0000000 - efffffff
[ 0.349995] PCI: Using configuration type 1 for base access
[ 0.350203] bio: create slab <bio-0> at 0
[ 0.350203] ACPI: EC: Look up EC in DSDT
[ 0.356377] ACPI: Interpreter enabled
[ 0.356381] ACPI: (supports S0 S3 S4 S5)
[ 0.356397] ACPI: Using IOAPIC for interrupt routing
[ 0.360550] ACPI: No dock devices found.
[ 0.360634] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.360666] pci 0000:00:00.0: reg 1c 64bit mmio: [0xe0000000-0xffffffff]
[ 0.360721] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
[ 0.360723] pci 0000:00:02.0: PME# disabled
[ 0.360759] pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
[ 0.360761] pci 0000:00:06.0: PME# disabled
[ 0.360792] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[ 0.360794] pci 0000:00:07.0: PME# disabled
[ 0.360839] pci 0000:00:11.0: reg 10 io port: [0xff00-0xff07]
[ 0.360844] pci 0000:00:11.0: reg 14 io port: [0xfe00-0xfe03]
[ 0.360850] pci 0000:00:11.0: reg 18 io port: [0xfd00-0xfd07]
[ 0.360855] pci 0000:00:11.0: reg 1c io port: [0xfc00-0xfc03]
[ 0.360861] pci 0000:00:11.0: reg 20 io port: [0xfb00-0xfb0f]
[ 0.360866] pci 0000:00:11.0: reg 24 32bit mmio: [0xfe02f000-0xfe02f3ff]
[ 0.360881] pci 0000:00:11.0: set SATA to AHCI mode
[ 0.360932] pci 0000:00:12.0: reg 10 32bit mmio: [0xfe02e000-0xfe02efff]
[ 0.360981] pci 0000:00:12.1: reg 10 32bit mmio: [0xfe02d000-0xfe02dfff]
[ 0.361045] pci 0000:00:12.2: reg 10 32bit mmio: [0xfe02c000-0xfe02c0ff]
[ 0.361101] pci 0000:00:12.2: supports D1 D2
[ 0.361103] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
[ 0.361106] pci 0000:00:12.2: PME# disabled
[ 0.361134] pci 0000:00:13.0: reg 10 32bit mmio: [0xfe02b000-0xfe02bfff]
[ 0.361182] pci 0000:00:13.1: reg 10 32bit mmio: [0xfe02a000-0xfe02afff]
[ 0.361246] pci 0000:00:13.2: reg 10 32bit mmio: [0xfe029000-0xfe0290ff]
[ 0.361303] pci 0000:00:13.2: supports D1 D2
[ 0.361304] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
[ 0.361308] pci 0000:00:13.2: PME# disabled
[ 0.361415] pci 0000:00:14.1: reg 10 io port: [0x00-0x07]
[ 0.361420] pci 0000:00:14.1: reg 14 io port: [0x00-0x03]
[ 0.361425] pci 0000:00:14.1: reg 18 io port: [0x00-0x07]
[ 0.361431] pci 0000:00:14.1: reg 1c io port: [0x00-0x03]
[ 0.361436] pci 0000:00:14.1: reg 20 io port: [0xfa00-0xfa0f]
[ 0.361501] pci 0000:00:14.2: reg 10 64bit mmio: [0xfe024000-0xfe027fff]
[ 0.361546] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
[ 0.361549] pci 0000:00:14.2: PME# disabled
[ 0.361644] pci 0000:00:14.5: reg 10 32bit mmio: [0xfe028000-0xfe028fff]
[ 0.361756] pci 0000:01:00.0: reg 10 64bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.361762] pci 0000:01:00.0: reg 18 64bit mmio: [0xfdec0000-0xfdedffff]
[ 0.361766] pci 0000:01:00.0: reg 20 io port: [0xee00-0xeeff]
[ 0.361773] pci 0000:01:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
[ 0.361797] pci 0000:01:00.0: supports D1 D2
[ 0.361823] pci 0000:01:00.1: reg 10 64bit mmio: [0xfdefc000-0xfdefffff]
[ 0.361859] pci 0000:01:00.1: supports D1 D2
[ 0.368072] pci 0000:00:02.0: bridge io port: [0xe000-0xefff]
[ 0.368075] pci 0000:00:02.0: bridge 32bit mmio: [0xfde00000-0xfdefffff]
[ 0.368078] pci 0000:00:02.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.368118] pci 0000:02:00.0: reg 10 io port: [0xde00-0xdeff]
[ 0.368131] pci 0000:02:00.0: reg 18 64bit mmio pref: [0xfdcff000-0xfdcfffff]
[ 0.368140] pci 0000:02:00.0: reg 20 64bit mmio pref: [0xfdcf8000-0xfdcfbfff]
[ 0.368188] pci 0000:02:00.0: supports D1 D2
[ 0.368189] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.368192] pci 0000:02:00.0: PME# disabled
[ 0.376076] pci 0000:00:06.0: bridge io port: [0xd000-0xdfff]
[ 0.376079] pci 0000:00:06.0: bridge 32bit mmio: [0xfdd00000-0xfddfffff]
[ 0.376082] pci 0000:00:06.0: bridge 64bit mmio pref: [0xfdc00000-0xfdcfffff]
[ 0.376115] pci 0000:03:00.0: reg 10 64bit mmio: [0xfd9f8000-0xfd9fffff]
[ 0.376165] pci 0000:03:00.0: supports D1 D2
[ 0.376166] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.376169] pci 0000:03:00.0: PME# disabled
[ 0.384076] pci 0000:00:07.0: bridge io port: [0xc000-0xcfff]
[ 0.384079] pci 0000:00:07.0: bridge 32bit mmio: [0xfd900000-0xfd9fffff]
[ 0.384081] pci 0000:00:07.0: bridge 64bit mmio pref: [0xfdf00000-0xfdffffff]
[ 0.384133] pci 0000:00:14.4: transparent bridge
[ 0.384137] pci 0000:00:14.4: bridge io port: [0xb000-0xbfff]
[ 0.384140] pci 0000:00:14.4: bridge 32bit mmio: [0xfdb00000-0xfdbfffff]
[ 0.384144] pci 0000:00:14.4: bridge 32bit mmio pref: [0xfda00000-0xfdafffff]
[ 0.384158] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.384347] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[ 0.384395] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
[ 0.384435] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE6._PRT]
[ 0.384469] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE7._PRT]
[ 0.396249] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.396314] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.396377] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.396439] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.396501] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.396563] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.396625] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.396687] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
[ 0.396750] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.396752] vgaarb: loaded
[ 0.396769] PCI: Using ACPI for IRQ routing
[ 0.396769] pci 0000:00:00.0: BAR 3: address space collision on of device [0xe0000000-0xffffffff]
[ 0.396769] pci 0000:00:00.0: BAR 3: can't allocate resource
[ 0.396769] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.396769] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
[ 0.398217] Switching to clocksource tsc
[ 0.398228] pnp: PnP ACPI init
[ 0.398228] ACPI: bus type pnp registered
[ 0.398315] pnp 00:0c: mem resource (0xcf600-0xcffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[ 0.398317] pnp 00:0c: mem resource (0xf0000-0xf7fff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[ 0.398319] pnp 00:0c: mem resource (0xf8000-0xfbfff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[ 0.398321] pnp 00:0c: mem resource (0xfc000-0xfffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[ 0.398323] pnp 00:0c: mem resource (0x0-0x9ffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[ 0.398325] pnp 00:0c: mem resource (0x100000-0xcfdeffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
[ 0.398380] pnp: PnP ACPI: found 13 devices
[ 0.398381] ACPI: ACPI bus type pnp unregistered
[ 0.398387] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
[ 0.398389] system 00:01: ioport range 0x220-0x225 has been reserved
[ 0.398390] system 00:01: ioport range 0x290-0x294 has been reserved
[ 0.398394] system 00:02: ioport range 0x4100-0x411f has been reserved
[ 0.398395] system 00:02: ioport range 0x228-0x22f has been reserved
[ 0.398397] system 00:02: ioport range 0x40b-0x40b has been reserved
[ 0.398399] system 00:02: ioport range 0x4d6-0x4d6 has been reserved
[ 0.398400] system 00:02: ioport range 0xc00-0xc01 has been reserved
[ 0.398402] system 00:02: ioport range 0xc14-0xc14 has been reserved
[ 0.398403] system 00:02: ioport range 0xc50-0xc52 has been reserved
[ 0.398405] system 00:02: ioport range 0xc6c-0xc6d has been reserved
[ 0.398407] system 00:02: ioport range 0xc6f-0xc6f has been reserved
[ 0.398408] system 00:02: ioport range 0xcd0-0xcd1 has been reserved
[ 0.398410] system 00:02: ioport range 0xcd2-0xcd3 has been reserved
[ 0.398412] system 00:02: ioport range 0xcd4-0xcdf has been reserved
[ 0.398413] system 00:02: ioport range 0x4000-0x40fe has been reserved
[ 0.398415] system 00:02: ioport range 0x4210-0x4217 has been reserved
[ 0.398417] system 00:02: ioport range 0xb00-0xb0f has been reserved
[ 0.398418] system 00:02: ioport range 0xb10-0xb1f has been reserved
[ 0.398420] system 00:02: ioport range 0xb20-0xb3f has been reserved
[ 0.398424] system 00:0b: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.398429] system 00:0c: iomem range 0xcfdf0000-0xcfdfffff could not be reserved
[ 0.398431] system 00:0c: iomem range 0xffff0000-0xffffffff has been reserved
[ 0.398433] system 00:0c: iomem range 0xcfe00000-0xcfefffff has been reserved
[ 0.398435] system 00:0c: iomem range 0xcff00000-0xcfffffff could not be reserved
[ 0.398436] system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved
[ 0.398438] system 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved
[ 0.398440] system 00:0c: iomem range 0xfff80000-0xfffeffff has been reserved
[ 0.403116] pci 0000:00:02.0: PCI bridge, secondary bus 0000:01
[ 0.403118] pci 0000:00:02.0: IO window: 0xe000-0xefff
[ 0.403120] pci 0000:00:02.0: MEM window: 0xfde00000-0xfdefffff
[ 0.403123] pci 0000:00:02.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
[ 0.403125] pci 0000:00:06.0: PCI bridge, secondary bus 0000:02
[ 0.403127] pci 0000:00:06.0: IO window: 0xd000-0xdfff
[ 0.403129] pci 0000:00:06.0: MEM window: 0xfdd00000-0xfddfffff
[ 0.403131] pci 0000:00:06.0: PREFETCH window: 0x000000fdc00000-0x000000fdcfffff
[ 0.403134] pci 0000:00:07.0: PCI bridge, secondary bus 0000:03
[ 0.403136] pci 0000:00:07.0: IO window: 0xc000-0xcfff
[ 0.403138] pci 0000:00:07.0: MEM window: 0xfd900000-0xfd9fffff
[ 0.403140] pci 0000:00:07.0: PREFETCH window: 0x000000fdf00000-0x000000fdffffff
[ 0.403142] pci 0000:00:14.4: PCI bridge, secondary bus 0000:04
[ 0.403145] pci 0000:00:14.4: IO window: 0xb000-0xbfff
[ 0.403149] pci 0000:00:14.4: MEM window: 0xfdb00000-0xfdbfffff
[ 0.403152] pci 0000:00:14.4: PREFETCH window: 0xfda00000-0xfdafffff
[ 0.403161] alloc irq_desc for 18 on node 0
[ 0.403162] alloc kstat_irqs on node 0
[ 0.403170] pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.403172] pci 0000:00:02.0: setting latency timer to 64
[ 0.403176] pci 0000:00:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.403178] pci 0000:00:06.0: setting latency timer to 64
[ 0.403181] alloc irq_desc for 19 on node 0
[ 0.403182] alloc kstat_irqs on node 0
[ 0.403187] pci 0000:00:07.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 0.403189] pci 0000:00:07.0: setting latency timer to 64
[ 0.403195] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.403197] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[ 0.403199] pci_bus 0000:01: resource 0 io: [0xe000-0xefff]
[ 0.403200] pci_bus 0000:01: resource 1 mem: [0xfde00000-0xfdefffff]
[ 0.403202] pci_bus 0000:01: resource 2 pref mem [0xd0000000-0xdfffffff]
[ 0.403203] pci_bus 0000:02: resource 0 io: [0xd000-0xdfff]
[ 0.403205] pci_bus 0000:02: resource 1 mem: [0xfdd00000-0xfddfffff]
[ 0.403206] pci_bus 0000:02: resource 2 pref mem [0xfdc00000-0xfdcfffff]
[ 0.403208] pci_bus 0000:03: resource 0 io: [0xc000-0xcfff]
[ 0.403209] pci_bus 0000:03: resource 1 mem: [0xfd900000-0xfd9fffff]
[ 0.403211] pci_bus 0000:03: resource 2 pref mem [0xfdf00000-0xfdffffff]
[ 0.403213] pci_bus 0000:04: resource 0 io: [0xb000-0xbfff]
[ 0.403214] pci_bus 0000:04: resource 1 mem: [0xfdb00000-0xfdbfffff]
[ 0.403215] pci_bus 0000:04: resource 2 pref mem [0xfda00000-0xfdafffff]
[ 0.403217] pci_bus 0000:04: resource 3 io: [0x00-0xffff]
[ 0.403218] pci_bus 0000:04: resource 4 mem: [0x000000-0xffffffffffffffff]
[ 0.403238] NET: Registered protocol family 2
[ 0.403336] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.403999] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.406047] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.406353] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.406355] TCP reno registered
[ 0.406443] NET: Registered protocol family 1
[ 0.406466] alloc irq_desc for 16 on node 0
[ 0.406467] alloc kstat_irqs on node 0
[ 0.406476] pci 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.424908] pci 0000:00:12.0: PCI INT A disabled
[ 0.424921] pci 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.440908] pci 0000:00:12.1: PCI INT A disabled
[ 0.440930] alloc irq_desc for 17 on node 0
[ 0.440932] alloc kstat_irqs on node 0
[ 0.440941] pci 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.440979] pci 0000:00:12.2: PCI INT B disabled
[ 0.440983] pci 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.456905] pci 0000:00:13.0: PCI INT A disabled
[ 0.456918] pci 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.472908] pci 0000:00:13.1: PCI INT A disabled
[ 0.472924] pci 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.472961] pci 0000:00:13.2: PCI INT B disabled
[ 0.472970] pci 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.488905] pci 0000:00:14.5: PCI INT C disabled
[ 0.488921] pci 0000:01:00.0: Boot video device
[ 0.488933] pci 0000:03:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 0.488971] pci 0000:03:00.0: PCI INT A disabled
[ 0.489011] Unpacking initramfs...
[ 0.619789] Freeing initrd memory: 9172k freed
[ 0.623172] PCI-DMA: Disabling AGP.
[ 0.623251] PCI-DMA: aperture base @ 20000000 size 65536 KB
[ 0.623252] PCI-DMA: using GART IOMMU.
[ 0.623255] PCI-DMA: Reserving 64MB of IOMMU area in the AGP aperture
[ 0.625437] audit: initializing netlink socket (disabled)
[ 0.625450] type=2000 audit(1338235956.624:1): initialized
[ 0.627553] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.628401] VFS: Disk quotas dquot_6.5.2
[ 0.628429] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.628475] msgmni has been set to 7926
[ 0.628644] alg: No test for stdrng (krng)
[ 0.628675] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.628677] io scheduler noop registered
[ 0.628678] io scheduler anticipatory registered
[ 0.628680] io scheduler deadline registered
[ 0.628711] io scheduler cfq registered (default)
[ 0.628793] alloc irq_desc for 24 on node 0
[ 0.628794] alloc kstat_irqs on node 0
[ 0.628801] pcieport 0000:00:02.0: irq 24 for MSI/MSI-X
[ 0.628805] pcieport 0000:00:02.0: setting latency timer to 64
[ 0.628888] alloc irq_desc for 25 on node 0
[ 0.628889] alloc kstat_irqs on node 0
[ 0.628893] pcieport 0000:00:06.0: irq 25 for MSI/MSI-X
[ 0.628896] pcieport 0000:00:06.0: setting latency timer to 64
[ 0.628962] alloc irq_desc for 26 on node 0
[ 0.628963] alloc kstat_irqs on node 0
[ 0.628966] pcieport 0000:00:07.0: irq 26 for MSI/MSI-X
[ 0.628969] pcieport 0000:00:07.0: setting latency timer to 64
[ 0.629776] Linux agpgart interface v0.103
[ 0.629800] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.629892] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.630119] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 0.630207] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 0.630238] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 0.630239] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 0.630407] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.630471] mice: PS/2 mouse device common for all mice
[ 0.630502] rtc_cmos 00:05: RTC can wake from S4
[ 0.630522] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 0.630551] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.630557] cpuidle: using governor ladder
[ 0.630558] cpuidle: using governor menu
[ 0.630561] No iBFT detected.
[ 0.630748] TCP cubic registered
[ 0.630811] NET: Registered protocol family 10
[ 0.631258] Mobile IPv6
[ 0.631259] NET: Registered protocol family 17
[ 0.631306] PM: Resume from disk failed.
[ 0.631311] registered taskstats version 1
[ 0.631601] rtc_cmos 00:05: setting system clock to 2012-05-28 20:12:37 UTC (1338235957)
[ 0.631628] Initalizing network drop monitor service
[ 0.631648] Freeing unused kernel memory: 592k freed
[ 0.631749] Write protecting the kernel read-only data: 4240k
[ 0.642165] udev[105]: starting version 164
[ 0.650934] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 0.677062] usbcore: registered new interface driver usbfs
[ 0.677080] usbcore: registered new interface driver hub
[ 0.678471] usbcore: registered new device driver usb
[ 0.680467] SCSI subsystem initialized
[ 0.680549] Floppy drive(s): fd0 is unknown type 13 (usb?)
[ 0.689871] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 0.689889] r8169 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.689942] r8169 0000:02:00.0: setting latency timer to 64
[ 0.689948] r8169 0000:02:00.0: (unregistered net_device): unknown MAC, using family default
[ 0.689990] alloc irq_desc for 27 on node 0
[ 0.689991] alloc kstat_irqs on node 0
[ 0.690001] r8169 0000:02:00.0: irq 27 for MSI/MSI-X
[ 0.690369] r8169 0000:02:00.0: eth0: RTL8168b/8111b at 0xffffc90000676000, 50:e5:49:35:14:d5, XID 0c900800 IRQ 27
[ 0.690610] libata version 3.00 loaded.
[ 0.691632] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.692368] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.692393] ehci_hcd 0000:00:12.2: EHCI Host Controller
[ 0.692410] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
[ 0.692438] ehci_hcd 0000:00:12.2: debug port 1
[ 0.692463] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfe02c000
[ 0.694996] xhci_hcd 0000:03:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[ 0.695015] xhci_hcd 0000:03:00.0: setting latency timer to 64
[ 0.695017] xhci_hcd 0000:03:00.0: xHCI Host Controller
[ 0.695025] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 2
[ 0.695098] xhci_hcd 0000:03:00.0: irq 19, io mem 0xfd9f8000
[ 0.695121] usb usb2: config 1 interface 0 altsetting 0 endpoint 0x81 has no SuperSpeed companion descriptor
[ 0.695127] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[ 0.695128] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.695130] usb usb2: Product: xHCI Host Controller
[ 0.695131] usb usb2: Manufacturer: Linux 2.6.32-5-amd64 xhci_hcd
[ 0.695132] usb usb2: SerialNumber: 0000:03:00.0
[ 0.695187] usb usb2: configuration #1 chosen from 1 choice
[ 0.695190] xHCI xhci_add_endpoint called for root hub
[ 0.695191] xHCI xhci_check_bandwidth called for root hub
[ 0.695209] hub 2-0:1.0: USB hub found
[ 0.695213] hub 2-0:1.0: 4 ports detected
[ 0.695817] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.696742] FDC 0 is a post-1991 82077
[ 0.700869] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
[ 0.700891] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.700893] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.700894] usb usb1: Product: EHCI Host Controller
[ 0.700895] usb usb1: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
[ 0.700896] usb usb1: SerialNumber: 0000:00:12.2
[ 0.700944] usb usb1: configuration #1 chosen from 1 choice
[ 0.700960] hub 1-0:1.0: USB hub found
[ 0.700964] hub 1-0:1.0: 6 ports detected
[ 0.701045] pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.701116] scsi0 : pata_atiixp
[ 0.701170] scsi1 : pata_atiixp
[ 0.701870] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xfa00 irq 14
[ 0.701872] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xfa08 irq 15
[ 0.701933] ahci 0000:00:11.0: version 3.0
[ 0.701945] alloc irq_desc for 22 on node 0
[ 0.701946] alloc kstat_irqs on node 0
[ 0.701954] ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 0.702060] ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[ 0.702062] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc
[ 0.702259] scsi2 : ahci
[ 0.702315] scsi3 : ahci
[ 0.702354] scsi4 : ahci
[ 0.702391] scsi5 : ahci
[ 0.702459] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22
[ 0.702462] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22
[ 0.702464] ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22
[ 0.702467] ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22
[ 0.702536] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.702547] ohci_hcd 0000:00:12.0: OHCI Host Controller
[ 0.702556] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 3
[ 0.702584] ohci_hcd 0000:00:12.0: irq 16, io mem 0xfe02e000
[ 0.760854] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.760856] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.760858] usb usb3: Product: OHCI Host Controller
[ 0.760859] usb usb3: Manufacturer: Linux 2.6.32-5-amd64 ohci_hcd
[ 0.760860] usb usb3: SerialNumber: 0000:00:12.0
[ 0.760913] usb usb3: configuration #1 chosen from 1 choice
[ 0.760929] hub 3-0:1.0: USB hub found
[ 0.760935] hub 3-0:1.0: 3 ports detected
[ 0.761009] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.761021] ehci_hcd 0000:00:13.2: EHCI Host Controller
[ 0.761028] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
[ 0.761051] ehci_hcd 0000:00:13.2: debug port 1
[ 0.761064] ehci_hcd 0000:00:13.2: irq 19, io mem 0xfe029000
[ 0.772859] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
[ 0.772875] usb usb4: New USB device found, idVendor=1d6b, idProduct=0002
[ 0.772876] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.772878] usb usb4: Product: EHCI Host Controller
[ 0.772881] usb usb4: Manufacturer: Linux 2.6.32-5-amd64 ehci_hcd
[ 0.772883] usb usb4: SerialNumber: 0000:00:13.2
[ 0.772927] usb usb4: configuration #1 chosen from 1 choice
[ 0.772943] hub 4-0:1.0: USB hub found
[ 0.772947] hub 4-0:1.0: 6 ports detected
[ 0.773021] ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.773034] ohci_hcd 0000:00:12.1: OHCI Host Controller
[ 0.773041] ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 5
[ 0.773055] ohci_hcd 0000:00:12.1: irq 16, io mem 0xfe02d000
[ 0.832847] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.832849] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.832850] usb usb5: Product: OHCI Host Controller
[ 0.832851] usb usb5: Manufacturer: Linux 2.6.32-5-amd64 ohci_hcd
[ 0.832852] usb usb5: SerialNumber: 0000:00:12.1
[ 0.832901] usb usb5: configuration #1 chosen from 1 choice
[ 0.832919] hub 5-0:1.0: USB hub found
[ 0.832925] hub 5-0:1.0: 3 ports detected
[ 0.832992] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.833004] ohci_hcd 0000:00:13.0: OHCI Host Controller
[ 0.833011] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 6
[ 0.833035] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfe02b000
[ 0.892858] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.892860] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.892862] usb usb6: Product: OHCI Host Controller
[ 0.892863] usb usb6: Manufacturer: Linux 2.6.32-5-amd64 ohci_hcd
[ 0.892864] usb usb6: SerialNumber: 0000:00:13.0
[ 0.892915] usb usb6: configuration #1 chosen from 1 choice
[ 0.892930] hub 6-0:1.0: USB hub found
[ 0.892937] hub 6-0:1.0: 3 ports detected
[ 0.893001] ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 0.893013] ohci_hcd 0000:00:13.1: OHCI Host Controller
[ 0.893019] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 7
[ 0.893032] ohci_hcd 0000:00:13.1: irq 18, io mem 0xfe02a000
[ 0.952839] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 0.952841] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 0.952842] usb usb7: Product: OHCI Host Controller
[ 0.952843] usb usb7: Manufacturer: Linux 2.6.32-5-amd64 ohci_hcd
[ 0.952844] usb usb7: SerialNumber: 0000:00:13.1
[ 0.952894] usb usb7: configuration #1 chosen from 1 choice
[ 0.952910] hub 7-0:1.0: USB hub found
[ 0.952916] hub 7-0:1.0: 3 ports detected
[ 0.952981] ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.952993] ohci_hcd 0000:00:14.5: OHCI Host Controller
[ 0.952999] ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 8
[ 0.953012] ohci_hcd 0000:00:14.5: irq 18, io mem 0xfe028000
[ 1.020009] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.020011] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.020012] usb usb8: Product: OHCI Host Controller
[ 1.020013] usb usb8: Manufacturer: Linux 2.6.32-5-amd64 ohci_hcd
[ 1.020015] usb usb8: SerialNumber: 0000:00:14.5
[ 1.020066] usb usb8: configuration #1 chosen from 1 choice
[ 1.020082] hub 8-0:1.0: USB hub found
[ 1.020089] hub 8-0:1.0: 2 ports detected
[ 1.024533] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.188034] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.188037] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.193595] ata5.00: ATA-8: SAMSUNG HD502HJ, 1AJ10001, max UDMA/133
[ 1.193602] ata5.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.193707] ata4.00: ATA-8: SAMSUNG HD103SJ, 1AJ10001, max UDMA/133
[ 1.193709] ata4.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.196028] ata6: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.197652] ata6.00: ATAPI: SONY DVD RW AD-7240S, 1.61, max UDMA/100
[ 1.199214] ata5.00: configured for UDMA/133
[ 1.199415] ata4.00: configured for UDMA/133
[ 1.199539] ata6.00: configured for UDMA/100
[ 1.212121] scsi 3:0:0:0: Direct-Access ATA SAMSUNG HD103SJ 1AJ1 PQ: 0 ANSI: 5
[ 1.212270] scsi 4:0:0:0: Direct-Access ATA SAMSUNG HD502HJ 1AJ1 PQ: 0 ANSI: 5
[ 1.217712] scsi 5:0:0:0: CD-ROM SONY DVD RW AD-7240S 1.61 PQ: 0 ANSI: 5
[ 1.222090] sd 3:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 1.222124] sd 4:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.222124] sd 3:0:0:0: [sda] Write Protect is off
[ 1.222126] sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.222141] sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.222162] sd 4:0:0:0: [sdb] Write Protect is off
[ 1.222164] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 1.222176] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.222234] sda:
[ 1.222409] sdb:sr0: scsi3-mmc drive: 125x/125x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.225115] Uniform CD-ROM driver Revision: 3.20
[ 1.225178] sr 5:0:0:0: Attached scsi CD-ROM sr0
[ 1.225821] sda1
[ 1.226028] sd 3:0:0:0: [sda] Attached SCSI disk
[ 1.232020] usb 3-2: new low speed USB device using ohci_hcd and address 2
[ 1.237206] sdb1 sdb2 sdb3 < sdb5 > sdb4
[ 1.250865] sd 4:0:0:0: [sdb] Attached SCSI disk
[ 1.253318] sd 3:0:0:0: Attached scsi generic sg0 type 0
[ 1.253337] sd 4:0:0:0: Attached scsi generic sg1 type 0
[ 1.253354] sr 5:0:0:0: Attached scsi generic sg2 type 5
[ 1.401843] usb 3-2: New USB device found, idVendor=09da, idProduct=0006
[ 1.401845] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.401847] usb 3-2: Product: PS/2+USB Mouse
[ 1.401848] usb 3-2: Manufacturer: A4Tech
[ 1.401903] usb 3-2: configuration #1 chosen from 1 choice
[ 1.411830] usbcore: registered new interface driver hiddev
[ 1.411875] usbcore: registered new interface driver usbhid
[ 1.411877] usbhid: v2.6:USB HID core driver
[ 1.516522] usb 4-4: new high speed USB device using ehci_hcd and address 2
[ 1.644269] PM: Starting manual resume from disk
[ 1.644271] PM: Resume from partition 8:21
[ 1.644273] PM: Checking hibernation image.
[ 1.644387] PM: Error -22 checking image file
[ 1.644389] PM: Resume from disk failed.
[ 1.653886] usb 4-4: New USB device found, idVendor=090c, idProduct=6300
[ 1.653888] usb 4-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1.653889] usb 4-4: Product: USB2.0 Card Reader
[ 1.653891] usb 4-4: Manufacturer: SMI
[ 1.653892] usb 4-4: SerialNumber: 12345678901234567890
[ 1.653949] usb 4-4: configuration #1 chosen from 1 choice
[ 1.658040] Initializing USB Mass Storage driver...
[ 1.658156] scsi6 : SCSI emulation for USB Mass Storage devices
[ 1.658212] usb-storage: device found at 2
[ 1.658213] usb-storage: waiting for device to settle before scanning
[ 1.658226] usbcore: registered new interface driver usb-storage
[ 1.658228] USB Mass Storage support registered.
[ 1.698740] EXT4-fs (sdb4): mounted filesystem with ordered data mode
[ 3.082098] udev[453]: starting version 164
[ 3.269482] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
[ 3.269487] ACPI: Power Button [PWRB]
[ 3.269538] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 3.269540] ACPI: Power Button [PWRF]
[ 3.298219] processor LNXCPU:00: registered as cooling_device0
[ 3.298245] processor LNXCPU:01: registered as cooling_device1
[ 3.298269] processor LNXCPU:02: registered as cooling_device2
[ 3.298293] processor LNXCPU:03: registered as cooling_device3
[ 3.390300] input: PC Speaker as /devices/platform/pcspkr/input/input4
[ 3.408723] ACPI: WMI: Mapper loaded
[ 3.798470] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
[ 3.798473] Disabling lock debugging due to kernel taint
[ 3.839561] [fglrx] Maximum main memory to use for locked dma buffers: 3801 MBytes.
[ 3.839604] [fglrx] vendor: 1002 device: 68b8 count: 1
[ 3.839830] [fglrx] ioport: bar 4, base 0xee00, size: 0x100
[ 3.839842] pci 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 3.839845] pci 0000:01:00.0: setting latency timer to 64
[ 3.840059] [fglrx] Kernel PAT support is enabled
[ 3.840073] [fglrx] module loaded - fglrx 8.77.5 [Aug 25 2010] with 1 minors
[ 3.842522] EDAC MC: Ver: 2.1.0 May 6 2012
[ 3.867741] ACPI: I/O resource piix4_smbus [0xb00-0xb07] conflicts with ACPI region SOR1 [0xb00-0xb0f]
[ 3.867779] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 4.120348] EDAC amd64_edac: Ver: 3.2.0 May 6 2012
[ 4.120454] EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3).
[ 4.120461] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[ 4.120462] Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[ 4.120463] (Note that use of the override may cause unknown side effects.)
[ 4.120475] amd64_edac: probe of 0000:00:18.2 failed with error -22
[ 4.217737] input: A4Tech PS/2+USB Mouse as /devices/pci0000:00/0000:00:12.0/usb3/3-2/3-2:1.0/input/input5
[ 4.217795] a4tech 0003:09DA:0006.0001: input,hidraw0: USB HID v1.10 Mouse [A4Tech PS/2+USB Mouse] on usb-0000:00:12.0-2/input0
[ 4.773586] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 4.860359] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input6
[ 4.863460] HDA Intel 0000:01:00.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 4.863483] HDA Intel 0000:01:00.1: setting latency timer to 64
[ 6.656232] usb-storage: device scan complete
[ 6.657447] scsi 6:0:0:0: Direct-Access SMI Reader 1.00 PQ: 0 ANSI: 0 CCS
[ 6.657732] sd 6:0:0:0: Attached scsi generic sg3 type 0
[ 6.658932] sd 6:0:0:0: [sdc] Attached SCSI removable disk
[ 7.089078] Adding 4393976k swap on /dev/sdb5. Priority:-1 extents:1 across:4393976k
[ 7.311428] loop: module loaded
[ 7.594755] fuse init (API version 7.13)
[ 8.660879] r8169 0000:02:00.0: eth0: link down
[ 8.660886] r8169 0000:02:00.0: eth0: link down
[ 8.661241] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 10.344644] r8169 0000:02:00.0: eth0: link up
[ 10.344992] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 14.314947] vboxdrv: Found 4 processor cores.
[ 14.314991] VBoxDrv: dbg - g_abExecMemory=ffffffffa05d39a0
[ 14.315032] vboxdrv: fAsync=0 offMin=0x3c8 offMax=0x5da1
[ 14.315066] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 14.315067] vboxdrv: Successfully loaded version 4.0.10_Debian (interface 0x00180000).
[ 18.025165] alloc irq_desc for 28 on node 0
[ 18.025167] alloc kstat_irqs on node 0
[ 18.025176] fglrx_pci 0000:01:00.0: irq 28 for MSI/MSI-X
[ 18.025648] [fglrx] Firegl kernel thread PID: 1585
[ 18.025906] [fglrx] IRQ 28 Enabled
[ 18.275104] lp: driver loaded but no devices found
[ 18.386265] ppdev: user-space parallel port driver
[ 18.393628] [fglrx] Gart USWC size:1240 M.
[ 18.393630] [fglrx] Gart cacheable size:491 M.
[ 18.393634] [fglrx] Reserved FB block: Shared offset:0, size:1000000
[ 18.393636] [fglrx] Reserved FB block: Unshared offset:f91d000, size:3e3000
[ 18.393637] [fglrx] Reserved FB block: Unshared offset:3fff4000, size:c000
[ 21.256511] eth0: no IPv6 routers present
[ 27.087803] CPU0 attaching NULL sched-domain.
[ 27.087808] CPU1 attaching NULL sched-domain.
[ 27.087810] CPU2 attaching NULL sched-domain.
[ 27.087812] CPU3 attaching NULL sched-domain.
[ 27.116618] CPU0 attaching sched-domain:
[ 27.116623] domain 0: span 0-3 level MC
[ 27.116624] groups: group ffff88000540fbf0 cpus 0 group ffff88000544fbf0 cpus 1 group ffff88000548fbf0 cpus 2 group ffff8800054cfbf0 cpus 3
[ 27.116632] CPU1 attaching sched-domain:
[ 27.116633] domain 0: span 0-3 level MC
[ 27.116635] groups: group ffff88000544fbf0 cpus 1 group ffff88000548fbf0 cpus 2 group ffff8800054cfbf0 cpus 3 group ffff88000540fbf0 cpus 0
[ 27.116640] CPU2 attaching sched-domain:
[ 27.116641] domain 0: span 0-3 level MC
[ 27.116642] groups: group ffff88000548fbf0 cpus 2 group ffff8800054cfbf0 cpus 3 group ffff88000540fbf0 cpus 0 group ffff88000544fbf0 cpus 1
[ 27.116647] CPU3 attaching sched-domain:
[ 27.116648] domain 0: span 0-3 level MC
[ 27.116649] groups: group ffff8800054cfbf0 cpus 3 group ffff88000540fbf0 cpus 0 group ffff88000544fbf0 cpus 1 group ffff88000548fbf0 cpus
<

febef · 29 Mayo 2012, 03:10 AM

habrás actualizado el kernel, con respecto a el problema creo que se solucionaría si bajas e instalas el driver de tu placa de red r8169 .

<[(x)]> · 29 Mayo 2012, 03:14 AM

:O

Gracias! parece haberse solucionado!

fue menos lio de lo q pense xd gracias denuevo.

Test Foro de elhacker.net SMF 2.1

problema, tengo conexión intermitente"

<[(x)]>

febef

<[(x)]>