Ayudaa, Router on Stick Inter-Vlan

[Agzzx]

Hola.
Necesito ayuda por favor, estoy armando una topologia bastante sencilla de router on stick. tengo un problema de comunicación con mis dispositivos finales, que en este caso es un Server y un PC. Cada uno llega al gateway del otro pero no se comunican entre si, ayuda porfavor. adjunto configuraciones.

Router:

Router#sh run
Building configuration...

Current configuration : 1241 bytes
!
version 15.1
no service timestamps log datetime msec
no service timestamps debug datetime msec
no service password-encryption
!
hostname Router
!
!
!
!
ip dhcp excluded-address 100.100.100.1 100.100.100.5
ip dhcp excluded-address 200.200.200.1 200.200.200.5
!
ip dhcp pool Adm&Red
network 100.100.100.0 255.255.255.0
default-router 100.100.100.1
dns-server 100.100.100.5
ip dhcp pool Ventas
network 200.200.200.0 255.255.255.0
default-router 200.200.200.254
dns-server 100.100.100.5
!
!
!
no ip cef
no ip routing
!
no ipv6 cef
!
!
!
!
license udi pid CISCO2911/K9 sn FTX1524467Y
!
!
!
!
!
!
!
!
!
!
!
spanning-tree mode pvst
!
!
!
!
!
!
interface GigabitEthernet0/0
no ip address
duplex auto
speed auto
!
interface GigabitEthernet0/0.100
encapsulation dot1Q 100 native
ip address 100.100.100.1 255.255.255.0
!
interface GigabitEthernet0/0.200
encapsulation dot1Q 200
ip address 200.200.200.254 255.255.255.0
!
interface GigabitEthernet0/1
no ip address
duplex auto
speed auto
shutdown
!
interface GigabitEthernet0/2
no ip address
duplex auto
speed auto
shutdown
!
interface Vlan1
no ip address
shutdown
!
ip classless
!
ip flow-export version 9
!
!
!
!
!
!
!
line con 0
!
line aux 0
!
line vty 0 4
login
!
!
!
end


Switch:

Building configuration...

Current configuration : 1731 bytes
!
version 12.2
no service timestamps log datetime msec
no service timestamps debug datetime msec
no service password-encryption
!
hostname Switch
!
!
!
ip name-server 100.100.100.5
!
!
spanning-tree mode pvst
!
interface FastEthernet0/1
switchport trunk native vlan 100
switchport trunk allowed vlan 100,200
switchport mode trunk
!
interface FastEthernet0/2
!
interface FastEthernet0/3
!
interface FastEthernet0/4
!
interface FastEthernet0/5
switchport access vlan 100
!
interface FastEthernet0/6
switchport access vlan 100
!
interface FastEthernet0/7
switchport access vlan 100
!
interface FastEthernet0/8
switchport access vlan 100
!
interface FastEthernet0/9
switchport access vlan 100
!
interface FastEthernet0/10
switchport access vlan 100
spanning-tree portfast
!
interface FastEthernet0/11
!
interface FastEthernet0/12
!
interface FastEthernet0/13
!
interface FastEthernet0/14
!
interface FastEthernet0/15
switchport access vlan 200
!
interface FastEthernet0/16
switchport access vlan 200
!
interface FastEthernet0/17
switchport access vlan 200
!
interface FastEthernet0/18
switchport access vlan 200
!
interface FastEthernet0/19
switchport access vlan 200
!
interface FastEthernet0/20
switchport access vlan 200
switchport mode access
spanning-tree portfast
!
interface FastEthernet0/21
!
interface FastEthernet0/22
!
interface FastEthernet0/23
!
interface FastEthernet0/24
!
interface GigabitEthernet0/1
!
interface GigabitEthernet0/2
!
interface Vlan1
no ip address
shutdown
!
interface Vlan100
ip address 100.100.100.2 255.255.255.0
!
interface Vlan200
ip address 200.200.200.2 255.255.255.0
!
ip default-gateway 100.100.100.1
!
!
!
!
line con 0
!
line vty 0 4
login
line vty 5 15
login
!
!
end




Nota:
El equipo de la vlan 200 es DHCP y de la vlan 100 es estatico

agradezco su ayuda porfavor

[Agzzx]

Resuelto, solo falto un ip routing en el router. 

[andavid]

Una ruta estatica