Mensajes

no me importa reiniciar ni nada... me podrias decir a grandes rasgos la diferencia entre fedora, mint, debian, y ubuntu?

instale ubuntu 12.04 antes de mint y tenia problemas con la tarjeta grafica y tampoco se conectaba a internet...

puse codigo para que no ocupara todo asi pero bueno. no se soy nuevo en el foro y no se bien como usarlo.
ante todo. gracias por las respuestas rapidas y la paciencia... entiendo que debe ser hartante responder las preguntas de los novatos una y otra vez... pero yo busque en internet y no salia nada...

no tengo otro cable pero en windows anda el internet asique no es problema del cable...
buscando y buscando encontre el cd de intalacion del modem. supongo que encontre una solucion pero no se como usarlo. trate de hacerle doble click a todo pero no sirve asique me digne a leer el readme y encontre esto... esperemos que esto solucion las cosas

Código [Seleccionar] Expandir

Linux Driver

Contents:
-----------
1. File Description
2. Driver Installation for Linux
3. Driver Parameter
4. None EEPROM
5. EEPROM MP (OEM Only)

1. File Description
-------------------

Filename                Description
====================    =======================================================
sundance_main.c         Linux Driver Source Code.
                        This file is the main part of Linux Driver.

compat.h                Network interface message level settings.

crc32.h                 Crc function for early Linux 2.4.19pre kernel inclusion

ethtool.h:              Defines for Linux ethtool.

mii.h                   definitions for MII-compatible transceivers.

mii.c                   MII interface library.

makefile                Make File For IP100 Linux Driver.
                        Using "make all" for your kernel.

readme.txt              A summary of the contents for Linux Driver.
                        This file, which you are reading me now.



2. Driver Installation for Linux
-----------------------------------------
a. for kernel 2.4.x
   a1. Redhat 7.3 (linux kernel 2.4.18)
   a2. Mandrake 8.1 (kernel 2.4.8)
b. for kernel 2.6.x
c. automatically load and configure at next boot time

   a.for kernel 2.4.x
   -------------------
     a1. Redhat 7.3 (linux kernel 2.4.18)
     a1.1. install way 1:
         #make all =>generate sundance.o
         #cp sundance.o /lib/modules/2.4.18-3/kernel/drivers/net/
         #insmod ./sundance.o
         #ifconfig eth0 xxx.xxx.xxx.xxx netmask yyy.yyy.yyy.yyy
            eth0 is your network adapter,use "dmesg" to check it, ex: eth0, eth1...
            xxx  is your ip address, ex: 192.168.102.211
            yyy  is your netmask address, ex:255.255.255.0

     a1.2.  install way 2:
        #make all =>generate sundance.o
        #cp sundance.o /lib/modules/2.4.18-3/kernel/drivers/net/
        #insmod./sundance.o
        #setup
        [network configuration] =>to setup your ip address
        #ifup eth0
           eth0 is your network adapter, ex: eth0, eth1...


     a2. Mandrake 8.1 (kernel 2.4.8)
       #make all  => generate sundance.o
       #cp sundance.o /lib/modules/2.4.8-26mdk/kernel/drivers/net
       #insmod ./sundance.o
       #ifconfig eth0 xxx.xxx.xxx.xxx netmask yyy.yyy.yyy.yyy
           eth0 is your network adapter,use "dmesg" to check it, ex: eth0, eth1...
           xxx  is your ip address, ex: 192.168.102.211
           yyy  is your netmask address, ex:255.255.255.0


   b. for kernel 2.6.x
   -------------------
      #make all  => generate sundance.ko
      #insmod ./sundance.ko (or sundance.o)
      #ifconfig eth0 xxx.xxx.xxx.xxx netmask yyy.yyy.yyy.yyy
            eth0 is your network adapter,use "dmesg" to check it, ex: eth0, eth1...
            xxx  is your ip address, ex: 192.168.102.211
            yyy  is your netmask address, ex:255.255.255.0     
   
   c. automatically load and configure at next boot time
   -----------------------------------------------------
     c1. cp sundance.o /lib/modules/`uname -r`/kernel/drivers/net
     *note: The `uname -r` is a command. Don't replace `uname -r` with
            2.4.18, 2.4.20smp, or some others. Must type `uname -r` directly.

     c2. Add the following lines at /etc/modules.conf:
           
      alias eth0 sundance
      options sundance <optional parameters>
                       
     c3. Run "netconfig" or "netconf" to create configuration script

              ifcfg-eth0 located at /etc/sysconfig/network-scripts or
              create it manually.
              [see - Configuration Script Sample]

     c4. Driver will automatically load and configure at
              next boot time.
             
     c5. Configuration Script Sample
     ===========================
         Here is a sample of a simple configuration script:

         DEVICE=eth0
         USERCTL=no
         ONBOOT=yes
         POOTPROTO=none
         BROADCAST=207.200.5.255
         NETWORK=207.200.5.0
         NETMASK=255.255.255.0
         IPADDR=207.200.5.2
             

3. Driver Parameter
-------------------
  If you want to change the link speed, you could use parameter after
  insmod command.
 
  insmod sundance.o <optional parameter>    ; add parameter

  ========================================================================
   example: insmod sundance.o media=100mbps_hd
   or     insmod sundance.o media=3
   or     insmod sundance.o media=1,2,3,4 ; for 4 cards or IP100
  ========================================================================             
 
  Parameter Description
  =====================
  You can install this driver without any addtional parameter. However, if
  you are going to have extensive functions then it is necessary to set
  extra parameter. Below is a list of the command line parameters supported
  by the Linux device driver.

media=xxxxxxxxx - Specifies the media type the NIC operates at.
  autosense Autosensing active media.
  10mbps_hd 10Mbps half duplex.
  10mbps_fd 10Mbps full duplex.
  100mbps_hd 100Mbps half duplex.
  100mbps_fd 100Mbps full duplex.
  0 Autosensing active media.
  1 10Mbps half duplex.
  2 10Mbps full duplex.
  3 100Mbps half duplex.
  4 100Mbps full duplex.
  By default, the copper devices operate at
  autosense, the fiber devices operate at
  100Mbps full duplex.
  Note that, the fiber adapter only support
  100Mbps half/full duplex types.

  If wanting to change speed, this driver needed to be unloaded and reloaded with
  new media parameter. Use rmmod to unload and insmod to reload driver.
  ========================================================================
   example: rmmod sundance.o
        insmod sundance.o media=3
  ========================================================================   

flowctrl=[0|1] - Specifies the flow control function.
  0 Disable flow control.
  1 Enable flow control.

4. None EEPROM
--------------
  If you want to use none eeprom solution. Please put EEPROM EEDO pin to GND.
  And, please add following -DNO_EEPROM define in Makefile, and re-compile again.

MAPPING_MODE= -DUSE_IO_OPS -DNO_EEPROM

5. EEPROM MP (OEM Only)
-----------------------
  This is a special tool for OEM embedded system to burn eeprom value with
  MAC address. It is not for normal user. If you need this tool, please contact
  us directly. Thanks.
 
  5.1. unzip mp.zip and put 'mp directory' in the same directory with
  sundance_main.c

  5.2. Change Makefile:
  Form: "MAPPING_MODE= -DUSE_IO_OPS"
  To: "MAPPING_MODE= -DUSE_IO_OPS -DMP_EEPROM"

  Rebuild and load driver

  5.3. Read MAC address form EEPROM
  #cat /proc/ICPlus_eth0/IPF_EEPROM

  5.4. Write MAC address to EEPROM
  #echo "001122334455">/proc/ICPlus_eth0/IPF_EEPROM

  5.5. Convert EEPROM.TXT to eeprom_data.h
  run eep_cvrt.exe will convert EEPROM.txt to eeprom_data.h for linux driver
  use.


aca estan los resultados!!!

lsusb

Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub

Bus 002 Device 002: ID 04d9:1605 Holtek Semiconductor, Inc.

lspci

00:00.0 Host bridge: Intel Corporation 82865G/PE/P DRAM Controller/Host-Hub Interface (rev 02)

00:01.0 PCI bridge: Intel Corporation 82865G/PE/P AGP Bridge (rev 02)

00:06.0 System peripheral: Intel Corporation 82865G/PE/P Processor to I/O Memory Interface (rev 02)

00:1d.0 USB controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1 (rev 02)

00:1d.1 USB controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2 (rev 02)

00:1d.2 USB controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3 (rev 02)

00:1d.3 USB controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #4 (rev 02)

00:1d.7 USB controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller (rev 02)

00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev c2)

00:1f.0 ISA bridge: Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge (rev 02)

00:1f.1 IDE interface: Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE Controller (rev 02)

00:1f.2 IDE interface: Intel Corporation 82801EB (ICH5) SATA Controller (rev 02)

00:1f.3 SMBus: Intel Corporation 82801EB/ER (ICH5/ICH5R) SMBus Controller (rev 02)

00:1f.5 Multimedia audio controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller (rev 02)

01:00.0 VGA compatible controller: NVIDIA Corporation NV36 [GeForce FX 5700LE] (rev a1)

02:02.0 Ethernet controller: Sundance Technology Inc / IC Plus Corp IC Plus IP100A Integrated 10/100 Ethernet MAC + PHY (rev 31)

muchas gracias por la paciencia. es un modem con cable. es ethernet la conecxion no usb...
apenas pueda instalo de nuevo mint y pongo los resultados. desde ya gracias!

pd:tengo que estudiar para la uni

ya lo hice y solo me respondio uno solo y puse mas informacion ahi:(

hola? solo tienen que decir. si sirve o no sirve. o que es lo que no sirve y ya. porfaaa

no tengo la menor idea jajaja es un tp link el modem que va en la pc y el modem modem es marca webstar es lo unico que se , perdon

tengo una nvidia geforce 5700 fx de 256mb

pero ya resolvi ese problema. en linux 13 maya no hay mas ese problema. no me puedo conectar a internet. que puedo hacer?

no me puedo conectar a internet con linux mint maya 13 que hago??