Mensajes

Encontre esta informacion en ingles sobre el cantado "bpi" espero sirva de algo

+----------------------------------------------------------------------------------------------------------------------------------------------------------------+

Well since this is lost inside a few topics around I added these telnet commands here:

To disable BPI+, skipping the cert verification so you can get online with any mac:

Telnet into your modem, do this by typing telnet 192.168.100.1 into a dos shell (make sure you enabled the telnet daemon if your firmware has this option).

Note: if its asking for a password you may check out the firmware page (sigma x2/stealth edition). For Ambit250 its usually user:admin pw:infinite (if you did not change).

Sigma X2 / FERCSA Stealth Build / Ambit 250

CODE
cd n
cd d
enable bpi true
bpi_version 0
write

SigmaX 1.06

CODE
cd n
cd d
enable bpi true
bpi_version 0
UpdateSettings


And its ready! You will need to restart the modem in order for these changes to take effect (the CM needs to re-register with the CMTS).

Happy Hacking!!

+----------------------------------------------------------------------------------------------------------------------------------------------------------------+

Enable Bpi for 1.0

This setting is used to enable standard bpi on a network where bpi+ is being used. In short, it tricks the bpi server which is expecting bpi+ settings, all the server does is make sure that bpi is enabled it doesnt really check the version as it assumes it is set in the configuration file.

cd non-vol
cd docsis
bpi_version 0
write
cd ..
cd ..


Disable Bpi

This is used to disable bpi altogether. This sometimes works when the above doesnt.

cd non-vol
cd docsis
enable bpi false
write
cd ..
cd ..

If the above doesnt work try this as garyopa has mentioned.

cd non-vol
cd docsis
enable BPI false
write
bpi_version 0
enable BPI true
write


This should help you differintiate between the two settings.

Navegando por internet encontre en este foro sbhacker.net esta informacion...


hola a todos pongo los certificados de un sb5100 funcional los obtuve con ipfullview, si quieren saber mas investiguen sobre snmp y factorymode no duran ni 30 min y ya saben de q va, bueno son certificados de megared de megacable mexico ,los pueden subir por ipfullview o por snmp,,,vamos a chingar a megacable ,agamos de esta una gran comunidad ,por favoir aporten si saben otros metodos para tener inter funcional 


y deja este link:
http://www.megaupload.com/es/?d=6UMCO1F1

Viene con fotos pero la verdad no se que onda con eso.