Mensajes

seguro??? escucha, bueno lee
Ya comenté que yo me conecto a internet desde ubuntu con una conceptronic c54ru (que segun lo que leí si vale para aircrack), puede que ese chipset sea el de esta tarjeta y no el de la D-link DWA-140...
no se.... pero en el momento  de escribir los comandos desenchufé la conceptronic y enchufé la D-link
De todas formas, lo dixo, si no encuentro una que funcione, utilizaré la conceptronic, aunque está mas sorda que una tapia.
de hexo, hoy hice pruebas para ver cuantos wifi pillaba con la conceptronic, en un apartamento de la playa, y no pillaba muxos.... y con poca intensidad... por eso lo de  comprar una nueva.... con mas potencia
ademas, me e dado cuenta que la D-link no le puedo enxufar una antena externa.... Y por lo que e visto... para poder pillar los wifi bien, Hace falta caxarros bastante potentes con antenas unidireccinales y todo eso...
Por eso propuese lo de la Bosslan 500, por que dicen que es muy buena(y la verdad es  que tienen razon) lo unico que le falta es eso, la tecnologia N
Siento ser tan pesado y reiterante pero para evitar problemas, pues eso, si me pudieran dar nombres de modelos del estilo de la Bosslan yo keo que acabamos antes.
PD: con lo referente a la tarjeta D-link, si resulta que al final ese chipset que me dices es el suyo admelo saber, porque significaria que los chipset rt2870(que parece ser que son uno de los chipset que vienen con la tecnología N) funcionan con el aircrack.

Bueno muxas gracias de verdad por vuestra ayuda

[y no importa lo que cueste]

Miren señores, para no complicarse más, y no darles mas la lata. Por que no me dicen ustedes cual es la mejor antena para funcionar con aircrack, Hay va lo que quero por or den de prioridad.  y no importa lo que cueste
Compatible con linux y que funcione en el aircrack
A ser posible que tenga un velocidad de 108 o 300Mbps(tecnologia N, pero segun parece estas tarjetas van con chipset nuevos que no van en linux todavia)
fundamentalmente eso, como la bosslan 500, que dicen que es muy buena, de echo si fuera a 108 o 300Mbps me quedaria con esta, pero si no hubiera ninguna a esta velociad y  si ustedes no me aconsejan otra....
Lo de que valla a esta velocidad es para poder sacar el maximo provecho. bueno a2

[lspci]

 ya he podido hacer lo que me habeis dixo, antes de nada mi kernel es 2.6.24-19-generic

despues (y hay que tener huevos para entender esto) aquí está lo que me sale cuando escribo:
(recuerdo que cuando conecto el USB nuevo no funciona)
lspci

00:00.0 Host bridge: Silicon Integrated Systems [SiS] 655 Host (rev 50)
00:01.0 PCI bridge: Silicon Integrated Systems [SiS] SiS AGP Port (virtual PCI-to-PCI bridge)
00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS964 [MuTIOL Media IO] (rev 36)
00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev 01)
00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] AC'97 Sound Controller (rev a0)
00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f)
00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f)
00:03.2 USB Controller: Silicon Integrated Systems [SiS] USB 1.1 Controller (rev 0f)
00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 Controller
00:04.0 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 PCI Fast Ethernet (rev 91)
00:05.0 RAID bus controller: Silicon Integrated Systems [SiS] RAID bus controller 180 SATA/PATA  [SiS] (rev 01)
00:09.0 Multimedia audio controller: Ensoniq ES1371 [AudioPCI-97] (rev 09)
01:00.0 VGA compatible controller: nVidia Corporation NV34 [GeForce FX 5200] (rev a1)

y cuando escribo:

dmesg

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.24-19-generic (buildd@terranova) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Fri Jul 11 23:41:49 UTC 2008 (Ubuntu 2.6.24-19.36-generic)
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000003ff30000 (usable)
[    0.000000]  BIOS-e820: 000000003ff30000 - 000000003ff40000 (ACPI data)
[    0.000000]  BIOS-e820: 000000003ff40000 - 000000003fff0000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved)
[    0.000000]  BIOS-e820: 00000000ff7c0000 - 0000000100000000 (reserved)
[    0.000000] 127MB HIGHMEM available.
[    0.000000] 896MB LOWMEM available.
[    0.000000] Entering add_active_range(0, 0, 261936) 0 entries of 256 used
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   Normal       4096 ->   229376
[    0.000000]   HighMem    229376 ->   261936
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[1] active PFN ranges
[    0.000000]     0:        0 ->   261936
[    0.000000] On node 0 totalpages: 261936
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 4064 pages, LIFO batch:0
[    0.000000]   Normal zone: 1760 pages used for memmap
[    0.000000]   Normal zone: 223520 pages, LIFO batch:31
[    0.000000]   HighMem zone: 254 pages used for memmap
[    0.000000]   HighMem zone: 32306 pages, LIFO batch:7
[    0.000000]   Movable zone: 0 pages used for memmap
[    0.000000] DMI 2.3 present.
[    0.000000] ACPI: RSDP signature @ 0xC00FB250 checksum 0
[    0.000000] ACPI: RSDP 000FB250, 0014 (r0 ACPIAM)
[    0.000000] ACPI: RSDT 3FF30000, 0030 (r1 A M I  OEMRSDT   9000417 MSFT       97)
[    0.000000] ACPI: FACP 3FF30200, 0081 (r2 A M I  OEMFACP   9000417 MSFT       97)
[    0.000000] ACPI: DSDT 3FF303F0, 3478 (r1  100XX 100XX001        1 INTL  2002026)
[    0.000000] ACPI: FACS 3FF40000, 0040
[    0.000000] ACPI: APIC 3FF30390, 005C (r1 A M I  OEMAPIC   9000417 MSFT       97)
[    0.000000] ACPI: OEMB 3FF40040, 0040 (r1 A M I  AMI_OEM   9000417 MSFT       97)
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] Processor #0 15:3 APIC version 20
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] Processor #1 15:3 APIC version 20
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bf7c0000)
[    0.000000] swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000
[    0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e8000
[    0.000000] swsusp: Registered nosave memory region: 00000000000e8000 - 0000000000100000
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 259890
[    0.000000] Kernel command line: root=UUID=3c7aeb0b-fa1e-49ab-8036-5f6e4050f6e1 ro quiet splash
[    0.000000] mapped APIC to ffffb000 (fee00000)
[    0.000000] mapped IOAPIC to ffffa000 (fec00000)
[    0.000000] Enabling fast FPU save and restore... done.
[    0.000000] Enabling unmasked SIMD FPU exception support... done.
[    0.000000] Initializing CPU#0
[    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[    0.000000] Detected 3000.996 MHz processor.
[   26.436892] Console: colour VGA+ 80x25
[   26.436896] console [tty0] enabled
[   26.437303] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[   26.437695] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[   26.463559] Memory: 1026604k/1047744k available (2177k kernel code, 20472k reserved, 1006k data, 368k init, 130240k highmem)
[   26.463568] virtual kernel memory layout:
[   26.463569]     fixmap  : 0xfff4b000 - 0xfffff000   ( 720 kB)
[   26.463570]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[   26.463571]     vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
[   26.463572]     lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
[   26.463573]       .init : 0xc0421000 - 0xc047d000   ( 368 kB)
[   26.463574]       .data : 0xc0320474 - 0xc041bdc4   (1006 kB)
[   26.463574]       .text : 0xc0100000 - 0xc0320474   (2177 kB)
[   26.463578] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[   26.463623] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
[   26.543595] Calibrating delay using timer specific routine.. 6006.18 BogoMIPS (lpj=12012374)
[   26.543622] Security Framework initialized
[   26.543629] SELinux:  Disabled at boot.
[   26.543643] AppArmor: AppArmor initialized
[   26.543648] Failure registering capabilities with primary security module.
[   26.543656] Mount-cache hash table entries: 512
[   26.543790] Initializing cgroup subsys ns
[   26.543796] Initializing cgroup subsys cpuacct
[   26.543809] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 0000441d 00000000 00000000 00000000
[   26.543819] monitor/mwait feature present.
[   26.543821] using mwait in idle threads.
[   26.543827] CPU: Trace cache: 12K uops, L1 D cache: 16K
[   26.543829] CPU: L2 cache: 1024K
[   26.543832] CPU: Physical Processor ID: 0
[   26.543835] CPU: After all inits, caps: bfebfbff 00000000 00000000 0000b180 0000441d 00000000 00000000 00000000
[   26.543845] Compat vDSO mapped to ffffe000.
[   26.543862] Checking 'hlt' instruction... OK.
[   26.560040] SMP alternatives: switching to UP code
[   26.561937] Early unpacking initramfs... done
[   26.854666] ACPI: Core revision 20070126
[   26.854718] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
[   26.856366] CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 04
[   26.856385] SMP alternatives: switching to SMP code
[   26.857178] Booting processor 1/1 eip 3000
[   26.867291] Initializing CPU#1
[   26.947337] Calibrating delay using timer specific routine.. 6002.18 BogoMIPS (lpj=12004372)
[   26.947347] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 0000441d 00000000 00000000 00000000
[   26.947354] monitor/mwait feature present.
[   26.947361] CPU: Trace cache: 12K uops, L1 D cache: 16K
[   26.947364] CPU: L2 cache: 1024K
[   26.947366] CPU: Physical Processor ID: 0
[   26.947369] CPU: After all inits, caps: bfebfbff 00000000 00000000 0000b180 0000441d 00000000 00000000 00000000
[   26.947748] CPU1: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 04
[   26.947790] Total of 2 processors activated (12008.37 BogoMIPS).
[   26.947886] ENABLING IO-APIC IRQs
[   26.948052] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[   27.095389] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[   27.115393] Brought up 2 CPUs
[   27.115419] CPU0 attaching sched-domain:
[   27.115422]  domain 0: span 03
[   27.115424]   groups: 01 02
[   27.115428]   domain 1: span 03
[   27.115430]    groups: 03
[   27.115433] CPU1 attaching sched-domain:
[   27.115434]  domain 0: span 03
[   27.115436]   groups: 02 01
[   27.115440]   domain 1: span 03
[   27.115441]    groups: 03
[   27.115719] net_namespace: 64 bytes
[   27.115731] Booting paravirtualized kernel on bare hardware
[   27.116293] Time: 16:34:27  Date: 08/14/08
[   27.116319] NET: Registered protocol family 16
[   27.116590] EISA bus registered
[   27.116596] ACPI: bus type pci registered
[   27.118008] PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1
[   27.118011] PCI: Using configuration type 1
[   27.118030] Setting up standard PCI resources
[   27.135536] ACPI: EC: Look up EC in DSDT
[   27.139093] ACPI: Interpreter enabled
[   27.139097] ACPI: (supports S0 S1 S3 S4 S5)
[   27.139115] ACPI: Using IOAPIC for interrupt routing
[   27.147610] ACPI: PCI Root Bridge [PCI0] (0000:00)
[   27.148521] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[   27.154609] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 12 14 15)
[   27.154718] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10 11 12 14 15)
[   27.154825] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 10 11 12 14 15)
[   27.154932] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *10 11 12 14 15)
[   27.155039] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 7 10 11 12 14 15)
[   27.155144] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 *10 11 12 14 15)
[   27.155261] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 10 *11 12 14 15)
[   27.155378] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 7 10 11 12 14 15)
[   27.155542] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] -  E4, should be D5 [20070126]
[   27.155549] Linux Plug and Play Support v0.97 (c) Adam Belay
[   27.155590] pnp: PnP ACPI init
[   27.155599] ACPI: bus type pnp registered
[   27.159981] pnp: PnP ACPI: found 15 devices
[   27.159984] ACPI: ACPI bus type pnp unregistered
[   27.159988] PnPBIOS: Disabled by ACPI PNP
[   27.160327] PCI: Using ACPI for IRQ routing
[   27.160331] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
[   27.195345] NET: Registered protocol family 8
[   27.195348] NET: Registered protocol family 20
[   27.195425] AppArmor: AppArmor Filesystem Enabled
[   27.199191] Time: tsc clocksource has been installed.
[   27.215378] system 00:09: ioport range 0x680-0x6ff has been reserved
[   27.215382] system 00:09: ioport range 0x290-0x297 has been reserved
[   27.215389] system 00:0a: ioport range 0x480-0x48f has been reserved
[   27.215391] system 00:0a: ioport range 0x4d0-0x4d1 has been reserved
[   27.215394] system 00:0a: ioport range 0x800-0x8df has been reserved
[   27.215396] system 00:0a: ioport range 0x8e0-0x8ff has been reserved
[   27.215400] system 00:0a: iomem range 0xffe80000-0xffefffff could not be reserved
[   27.215406] system 00:0b: iomem range 0xfec00000-0xfec00fff has been reserved
[   27.215409] system 00:0b: iomem range 0xfee00000-0xfee00fff has been reserved
[   27.215412] system 00:0b: iomem range 0xfff80000-0xffffffff could not be reserved
[   27.215420] system 00:0e: iomem range 0x0-0x9ffff could not be reserved
[   27.215423] system 00:0e: iomem range 0xc0000-0xdffff could not be reserved
[   27.215426] system 00:0e: iomem range 0xe0000-0xfffff could not be reserved
[   27.215428] system 00:0e: iomem range 0x100000-0x3ffeffff could not be reserved
[   27.215431] system 00:0e: iomem range 0x0-0x0 could not be reserved
[   27.245958] PCI: Bridge: 0000:00:01.0
[   27.245960]   IO window: disabled.
[   27.245966]   MEM window: fca00000-feafffff
[   27.245970]   PREFETCH window: e7f00000-f7efffff
[   27.245993] NET: Registered protocol family 2
[   27.283353] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[   27.283658] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[   27.284246] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[   27.284541] TCP: Hash tables configured (established 131072 bind 65536)
[   27.284544] TCP reno registered
[   27.295467] checking if image is initramfs... it is
[   27.746854] Switched to high resolution mode on CPU 0
[   27.746988] Switched to high resolution mode on CPU 1
[   27.873559] Freeing initrd memory: 7303k freed
[   27.874513] audit: initializing netlink socket (disabled)
[   27.874527] audit(1218731667.288:1): initialized
[   27.874756] highmem bounce pool size: 64 pages
[   27.877214] VFS: Disk quotas dquot_6.5.1
[   27.877313] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[   27.877466] io scheduler noop registered
[   27.877469] io scheduler anticipatory registered
[   27.877471] io scheduler deadline registered
[   27.877483] io scheduler cfq registered (default)
[   27.877557] Boot video device is 0000:01:00.0
[   27.877904] isapnp: Scanning for PnP cards...
[   28.229363] isapnp: No Plug & Play device found
[   28.267524] Real Time Clock Driver v1.12ac
[   28.267644] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[   28.267768] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   28.267913] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[   28.268717] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   28.269026] 00:0d: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[   28.270011] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[   28.270092] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[   28.270225] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[   28.270544] serio: i8042 KBD port at 0x60,0x64 irq 1
[   28.270552] serio: i8042 AUX port at 0x60,0x64 irq 12
[   28.294675] mice: PS/2 mouse device common for all mice
[   28.294835] EISA: Probing bus 0 at eisa.0
[   28.294871] EISA: Detected 0 cards.
[   28.294874] cpuidle: using governor ladder
[   28.294877] cpuidle: using governor menu
[   28.294961] NET: Registered protocol family 1
[   28.294991] Using IPI No-Shortcut mode
[   28.295022] registered taskstats version 1
[   28.295111]   Magic number: 4:789:590
[   28.295158]   hash matches device ptyc8
[   28.295221] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[   28.295223] EDD information not available.
[   28.295478] Freeing unused kernel memory: 368k freed
[   28.313664] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[   29.545893] fuse init (API version 7.9)
[   29.570670] ACPI: Processor [CPU1] (supports 8 throttling states)
[   29.570709] ACPI: Processor [CPU2] (supports 8 throttling states)
[   29.741815] SCSI subsystem initialized
[   29.821655] usbcore: registered new interface driver usbfs
[   29.821690] usbcore: registered new interface driver hub
[   29.833355] libata version 3.00 loaded.
[   29.843173] usbcore: registered new device driver usb
[   29.844045] ACPI: PCI Interrupt 0000:00:02.5[A] -> GSI 16 (level, low) -> IRQ 16
[   29.844111] ACPI: PCI interrupt for device 0000:00:02.5 disabled
[   29.857739] pata_sis 0000:00:02.5: version 0.5.2
[   29.857777] ACPI: PCI Interrupt 0000:00:02.5[A] -> GSI 16 (level, low) -> IRQ 16
[   29.865659] scsi0 : pata_sis
[   29.882767] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[   29.888177] scsi1 : pata_sis
[   29.889044] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[   29.889048] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[   30.065753] ata1.01: ATA-5: ST380021A, 3.19, max UDMA/100
[   30.065760] ata1.01: 156301488 sectors, multi 16: LBA
[   30.065780] ata1.01: limited to UDMA/33 due to 40-wire cable
[   30.081609] ata1.01: configured for UDMA/33
[   30.210035] sis900.c: v1.08.10 Apr. 2 2006
[   30.256794] Floppy drive(s): fd0 is 1.44M
[   30.273816] FDC 0 is a post-1991 82077
[   30.417184] ata2.00: ATAPI: LITE-ON DVDRW LH-18A1P, GL0C, max UDMA/66
[   30.417203] ata2.00: limited to UDMA/33 due to 40-wire cable
[   30.606084] ata2.00: configured for UDMA/33
[   30.606257] scsi 0:0:1:0: Direct-Access     ATA      ST380021A        3.19 PQ: 0 ANSI: 5
[   30.607380] scsi 1:0:0:0: CD-ROM            LITE-ON  DVDRW LH-18A1P   GL0C PQ: 0 ANSI: 5
[   30.611288] ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 17
[   30.611308] ohci_hcd 0000:00:03.0: OHCI Host Controller
[   30.611665] ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1
[   30.611693] ohci_hcd 0000:00:03.0: irq 17, io mem 0xfebfc000
[   30.667017] usb usb1: configuration #1 chosen from 1 choice
[   30.667061] hub 1-0:1.0: USB hub found
[   30.667073] hub 1-0:1.0: 3 ports detected
[   30.768819] ACPI: PCI Interrupt 0000:00:03.1 -> GSI 21 (level, low) -> IRQ 18
[   30.768842] ohci_hcd 0000:00:03.1: OHCI Host Controller
[   30.768896] ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 2
[   30.768919] ohci_hcd 0000:00:03.1: irq 18, io mem 0xfebfd000
[   30.826841] usb usb2: configuration #1 chosen from 1 choice
[   30.826896] hub 2-0:1.0: USB hub found
[   30.826910] hub 2-0:1.0: 3 ports detected
[   30.928679] ACPI: PCI Interrupt 0000:00:03.2[C] -> GSI 22 (level, low) -> IRQ 19
[   30.928702] ohci_hcd 0000:00:03.2: OHCI Host Controller
[   30.928747] ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 3
[   30.928768] ohci_hcd 0000:00:03.2: irq 19, io mem 0xfebfe000
[   30.986674] usb usb3: configuration #1 chosen from 1 choice
[   30.986716] hub 3-0:1.0: USB hub found
[   30.986727] hub 3-0:1.0: 2 ports detected
[   31.072475] usb 1-2: new full speed USB device using ohci_hcd and address 2
[   31.088632] ACPI: PCI Interrupt 0000:00:03.3[D] -> GSI 23 (level, low) -> IRQ 20
[   31.088652] ehci_hcd 0000:00:03.3: EHCI Host Controller
[   31.088699] ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 4
[   31.088738] PCI: cache line size of 128 is not supported by device 0000:00:03.3
[   31.088752] ehci_hcd 0000:00:03.3: irq 20, io mem 0xfebff000
[   31.101468] ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[   31.101651] usb usb4: configuration #1 chosen from 1 choice
[   31.101692] hub 4-0:1.0: USB hub found
[   31.101703] hub 4-0:1.0: 8 ports detected
[   31.204550] ACPI: PCI Interrupt 0000:00:04.0[A] -> GSI 19 (level, low) -> IRQ 21
[   31.205540] 0000:00:04.0: Unknown PHY transceiver found at address 0.
[   31.206201] 0000:00:04.0: Realtek RTL8201 PHY transceiver found at address 1.
[   31.206862] 0000:00:04.0: Unknown PHY transceiver found at address 2.
[   31.207522] 0000:00:04.0: Unknown PHY transceiver found at address 3.
[   31.208181] 0000:00:04.0: Unknown PHY transceiver found at address 4.
[   31.208849] 0000:00:04.0: Unknown PHY transceiver found at address 5.
[   31.209527] 0000:00:04.0: Unknown PHY transceiver found at address 6.
[   31.210340] 0000:00:04.0: Unknown PHY transceiver found at address 7.
[   31.211513] 0000:00:04.0: Unknown PHY transceiver found at address 9.
[   31.212305] 0000:00:04.0: Unknown PHY transceiver found at address 10.
[   31.213488] 0000:00:04.0: Unknown PHY transceiver found at address 12.
[   31.214614] 0000:00:04.0: Unknown PHY transceiver found at address 14.
[   31.215287] 0000:00:04.0: Unknown PHY transceiver found at address 15.
[   31.215965] 0000:00:04.0: Unknown PHY transceiver found at address 16.
[   31.216645] 0000:00:04.0: Unknown PHY transceiver found at address 17.
[   31.217313] 0000:00:04.0: Unknown PHY transceiver found at address 18.
[   31.217982] 0000:00:04.0: Unknown PHY transceiver found at address 19.
[   31.218652] 0000:00:04.0: Unknown PHY transceiver found at address 20.
[   31.219321] 0000:00:04.0: Unknown PHY transceiver found at address 21.
[   31.219989] 0000:00:04.0: Unknown PHY transceiver found at address 22.
[   31.220663] 0000:00:04.0: Unknown PHY transceiver found at address 23.
[   31.221331] 0000:00:04.0: Unknown PHY transceiver found at address 24.
[   31.222000] 0000:00:04.0: Unknown PHY transceiver found at address 25.
[   31.222668] 0000:00:04.0: Unknown PHY transceiver found at address 26.
[   31.223336] 0000:00:04.0: Unknown PHY transceiver found at address 27.
[   31.224059] 0000:00:04.0: Unknown PHY transceiver found at address 28.
[   31.224880] 0000:00:04.0: Unknown PHY transceiver found at address 29.
[   31.225548] 0000:00:04.0: Unknown PHY transceiver found at address 30.
[   31.226216] 0000:00:04.0: Unknown PHY transceiver found at address 31.
[   31.245751] 0000:00:04.0: Using transceiver found at address 1 as default
[   31.246763] eth0: SiS 900 PCI Fast Ethernet at 0xe400, IRQ 21, 00:11:2f:e3:0c:3e
[   31.246863] sata_sis 0000:00:05.0: version 1.0
[   31.246885] ACPI: PCI Interrupt 0000:00:05.0[A] -> GSI 17 (level, low) -> IRQ 22
[   31.246894] sata_sis 0000:00:05.0: Detected SiS 180/181/964 chipset in SATA mode
[   31.247570] scsi2 : sata_sis
[   31.248335] scsi3 : sata_sis
[   31.248415] ata3: SATA max UDMA/133 cmd 0xeff0 ctl 0xefe4 bmdma 0xef90 irq 22
[   31.248424] ata4: SATA max UDMA/133 cmd 0xefa8 ctl 0xefe0 bmdma 0xef98 irq 22
[   31.259054] Driver 'sd' needs updating - please use bus_type methods
[   31.259180] sd 0:0:1:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[   31.259205] sd 0:0:1:0: [sda] Write Protect is off
[   31.259212] sd 0:0:1:0: [sda] Mode Sense: 00 3a 00 00
[   31.259265] sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   31.259360] sd 0:0:1:0: [sda] 156301488 512-byte hardware sectors (80026 MB)
[   31.259377] sd 0:0:1:0: [sda] Write Protect is off
[   31.259381] sd 0:0:1:0: [sda] Mode Sense: 00 3a 00 00
[   31.259410] sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   31.259415]  sda:<4>Driver 'sr' needs updating - please use bus_type methods
[   31.281757]  sda1 sda2 < sda5 >
[   31.301083] sd 0:0:1:0: [sda] Attached SCSI disk
[   31.303752] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[   31.303758] Uniform CD-ROM driver Revision: 3.20
[   31.303834] sr 1:0:0:0: Attached scsi CD-ROM sr0
[   31.309466] sd 0:0:1:0: Attached scsi generic sg0 type 0
[   31.309501] sr 1:0:0:0: Attached scsi generic sg1 type 5
[   31.660065] usb 4-3: new high speed USB device using ehci_hcd and address 2
[   31.712053] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[   31.792914] usb 4-3: configuration #1 chosen from 1 choice
[   31.991062] ata3.00: ATA-8: WDC WD5000AAVS-00ZTB0, 01.01B01, max UDMA/133
[   31.991067] ata3.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
[   31.996447] ata3.00: configured for UDMA/133
[   32.031802] usb 4-4: new high speed USB device using ehci_hcd and address 3
[   32.307635] ata4: SATA link down (SStatus 0 SControl 300)
[   32.317908] scsi 2:0:0:0: Direct-Access     ATA      WDC WD5000AAVS-0 01.0 PQ: 0 ANSI: 5
[   32.318029] sd 2:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
[   32.318050] sd 2:0:0:0: [sdb] Write Protect is off
[   32.318054] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[   32.318089] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   32.318170] sd 2:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB)
[   32.318190] sd 2:0:0:0: [sdb] Write Protect is off
[   32.318194] sd 2:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[   32.318229] sd 2:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   32.318236]  sdb:<6>usb 4-4: configuration #1 chosen from 1 choice
[   32.328901]  sdb1
[   32.329008] sd 2:0:0:0: [sdb] Attached SCSI disk
[   32.329073] sd 2:0:0:0: Attached scsi generic sg2 type 0
[   32.563696] Attempting manual resume
[   32.563700] swsusp: Resume From Partition 8:5
[   32.563702] PM: Checking swsusp image.
[   32.563997] PM: Resume from disk failed.
[   32.581426] EXT3-fs: INFO: recovery required on readonly filesystem.
[   32.581431] EXT3-fs: write access will be enabled during recovery.
[   35.035163] kjournald starting.  Commit interval 5 seconds
[   35.035176] EXT3-fs: sda1: orphan cleanup on readonly fs
[   35.035184] ext3_orphan_cleanup: deleting unreferenced inode 2637884
[   35.035211] ext3_orphan_cleanup: deleting unreferenced inode 3981829
[   35.035234] ext3_orphan_cleanup: deleting unreferenced inode 3981828
[   35.035248] ext3_orphan_cleanup: deleting unreferenced inode 3981777
[   35.035262] EXT3-fs: sda1: 4 orphan inodes deleted
[   35.035264] EXT3-fs: recovery complete.
[   35.046885] EXT3-fs: mounted filesystem with ordered data mode.
[   47.492772] input: PC Speaker as /devices/platform/pcspkr/input/input2
[   48.168552] Linux agpgart interface v0.102
[   48.256604] agpgart: Detected SiS chipset - id:1621
[   48.261004] agpgart: AGP aperture is 64M @ 0xf8000000
[   48.308493] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   48.332058] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   48.393336] input: Power Button (FF) as /devices/virtual/input/input3
[   48.420317] ACPI: Power Button (FF) [PWRF]
[   48.420449] input: Power Button (CM) as /devices/virtual/input/input4
[   48.452290] ACPI: Power Button (CM) [PWRB]
[   48.731721] ACPI: PCI Interrupt 0000:00:02.7[C] -> GSI 18 (level, low) -> IRQ 23
[   49.151788] intel8x0_measure_ac97_clock: measured 52372 usecs
[   49.151794] intel8x0: clocking to 48000
[   49.507819] parport_pc 00:08: reported by Plug and Play ACPI
[   49.507868] parport0: PC-style at 0x378, irq 7 [PCSPP]
[   49.720546] ACPI: PCI Interrupt 0000:00:09.0[A] -> GSI 17 (level, low) -> IRQ 22
[   50.405113] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input5
[   50.603218] dvb-usb: found a 'WideView WT-220U PenType Receiver (Typhoon/Freecom)' in warm state.
[   50.603418] dvb-usb: will use the device's hardware PID filter (table count: 15).
[   50.603568] DVB: registering new adapter (WideView WT-220U PenType Receiver (Typhoon/Freecom))
[   50.603742] DVB: registering frontend 0 (WideView USB DVB-T)...
[   50.604187] input: IR-receiver inside an USB DVB receiver as /devices/pci0000:00/0000:00:03.3/usb4/4-3/input/input6
[   50.662883] dvb-usb: schedule remote query interval to 300 msecs.
[   50.662892] dvb-usb: WideView WT-220U PenType Receiver (Typhoon/Freecom) successfully initialized and connected.
[   50.662928] usbcore: registered new interface driver dvb_usb_dtt200u
[   50.926393] phy0: Selected rate control algorithm 'simple'
[   51.051480] usbcore: registered new interface driver rt73usb
[   52.475676] loop: module loaded
[   52.517060] lp0: using parport0 (interrupt-driven).
[   52.614109] Adding 3028212k swap on /dev/sda5.  Priority:-1 extents:1 across:3028212k
[   52.963707] dvb-usb: recv bulk message failed: -110
[   53.176036] EXT3 FS on sda1, internal journal
[   54.268203] ip_tables: (C) 2000-2006 Netfilter Core Team
[   54.718675] No dock devices found.
[   56.013402] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[   56.013410] apm: disabled - APM is not SMP safe.
[   56.246947] ppdev: user-space parallel port driver
[   56.428404] audit(1218731697.024:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5023 profile="/usr/sbin/cupsd" namespace="default"
[   58.476398] eth0: Media Link Off
[   58.601477] Bluetooth: Core ver 2.11
[   58.601783] NET: Registered protocol family 31
[   58.601789] Bluetooth: HCI device and connection manager initialized
[   58.601794] Bluetooth: HCI socket layer initialized
[   58.705253] Bluetooth: L2CAP ver 2.9
[   58.705261] Bluetooth: L2CAP socket layer initialized
[   58.828569] Bluetooth: RFCOMM socket layer initialized
[   58.828588] Bluetooth: RFCOMM TTY layer initialized
[   58.828592] Bluetooth: RFCOMM ver 1.8
[   81.050034] NET: Registered protocol family 10
[   81.051091] lo: Disabled Privacy Extensions
[   81.052032] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   81.052872] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   91.861887] NET: Registered protocol family 17
[   93.052305] wlan0: Initial auth_alg=0
[   93.052316] wlan0: authenticate with AP 00:14:f8:87:51:bc
[   93.054190] wlan0: RX authentication from 00:14:f8:87:51:bc (alg=0 transaction=2 status=0)
[   93.054195] wlan0: authenticated
[   93.054206] wlan0: associate with AP 00:14:f8:87:51:bc
[   93.056309] wlan0: RX AssocResp from 00:14:f8:87:51:bc (capab=0x411 status=0 aid=3)
[   93.056313] wlan0: associated
[   93.058914] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   95.223015] UDF-fs: No VRS found
[   95.250298] ISO 9660 Extensions: Microsoft Joliet Level 3
[   95.251285] ISOFS: changing to secondary root
[  112.063613] wlan0: no IPv6 routers present
[  120.565641] usb 4-7: new high speed USB device using ehci_hcd and address 4
[  120.714891] usb 4-7: configuration #1 chosen from 1 choice
[  308.874503] usb 4-4: USB disconnect, address 3
[  308.875130] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x3040 with error -19.
[  308.875142] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x3040 with error -19.
[  308.875150] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x0a failed for offset 0x0000 with error -19.
[  308.875157] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x3028 with error -19.
[  308.875162] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x06 failed for offset 0x3064 with error -19.
[  308.875168] phy0 -> rt2x00usb_vendor_request: Error - Vendor Request 0x0c failed for offset 0x0000 with error -19.

Hola otra vez
http://seguridadwireless.comprawifi.com/kits/kit-antena-yagi-18dbi-3mts-cable-rp-sma-adaptador-usb-wifi-conector-rp-sma-chipset-zydas-modo-monitor-pendrive-1gb-con-wifislax-instalado/prod_94.html
aquí hay una antena algo bestia que queria saber si funcionaria para el aircrack seguro que alguien la ha visto
Despues tambien vi po hay una bosslan 500 esta vale tambien no??? el problea es que la bosslan 500 va a54mbps, y me interesaría una capaz de tener mas velocidad....

PD: Por cierto sigo sin enterarme de como se instalan driver nuevos en linux

GRACIAS

el chipset....... estoy casi seguro que es rt2500
No entiendo la otra pregunta.... la tarjeta wifi (la conceptronic) se instaló sola, es decir cuando terminé de instalar  Ubuntu, tenia internet, yo no tuve mas que instalar Ubuntu. Sobre el kernel.... pos ni idea será la ultima actualización que haya del kernel para ubuntu, pues instale la ultima versión.
Y la pregunta era que,  si Ubuntu ya instala la tarjeta USB, ya no me tengo que preocupar por buscar driver, es decir el aircrack funcionaria ya no???

Pd: estoy teniendo problem con el pc (estoy escribiendo desde otro) probaré esos comandos cuando pueda

Eso de dmesg y lspci seran comandos no?

Bueno tengo otra tarjeta que es una conceptronic c54ru, que esta si he visto que es compatible, pero no encuentro los drivers para usarla con el aircrack... O se puden utilizar los que viene  con Ubuntu?, es decir, cuando instalé ubuntu, la tarjeta la tenia en el usb y la instaló correctamete ¿servirian estos driver? Tengo Ubuntu 8.0.4
Compré la otra porque era mas potente, pero si noc funciona... me tendré que apañar con esta

otra vez mas siento mi torpeza, pero es que no tengo ni papa de linux, y ni se como se instala los driver, ni como se intalan  programas....
Por cierto.... no se podrá usar el gestor de paquetes para instalar el aircrack verdad????

A ver,,,,  He insertado la tarjeta, y obiamente no ha echo nada, e puesto el disco que venía y no lo lee. escribí iwconfig
y sale esto
lo               no wireless extensions
eth0           no wireless extensions

por cierto, no se puede hacer cntrl + c en la consola????

conclusión?????

kreo que esto va a ser mas dificil de lo que parece.......

GRACIAS

Respecto a lo que me comentó Karr... No me enteré tengo que escribir eso codigo??
Donde en la consola de linux, en el aircrack????
Perdonen mi falta de conocimiento pero estoy perdido.......
GRACIAS

me he echo con una D-link DWA 140 con chipset ralink RT2870, es bastante buena, con tecnologia N, saben si es compatible para el aircrack.
Puede que esto sea un poco pedir demasiado, pero, si no tengo mas remedio que utilizar Linux, ¿hay por aquí algun tuto sobre como hacerlo con linux?  Vamos, es que yo estoy pegado en linux, y claro, necesito uno de esos "paso a paso"

Bueno Muchas gracias por todo

Bien, el problema es que todo lo que encuentro sobre chipsets y marcas de tarjetas es un poco confuso. Vamos, que cuando miro las especificaciones de las tarjetas wifi no dicen que chipset llevan, y me interesa saberlo para poder utilizar el aircrack. Creo que deber ser compatible con el "modo escucha" o "modo monitor"
Solo encontré una, pero su radio de acción era muy bajo por lo que no me interesa
¿hay alguen que me pueda aconsejar alguna antena wifi USB? me da igual lo cara que sea, lo que quiero es que sea buena. como la Belkin F5D8051, una maravilla, pero que yo sepa no se puede utilazar el aircrack con windows
Bien, sintetizando, busco una antena wifi USB con estas prestaciones pero con un Chipset con el que pueda utilizar el aircrack?
Saben algo???