Temas

Buenas quiero hacer unas pruebas con BT5 . Me he descargado la iso  y tmb la maquina virtual que esta disponible en su web. Cuando ejecuto la maquina virtual que me descargado, si essta en modo NAT funciona a red pero si esta en modo bridge no me da ninguna direccion, si ejecuto un ifconfig, me aparece esto:

Código [Seleccionar] Expandir

root@bt:~# ifconfig
eth1      Link encap:Ethernet  HWaddr 00:0c:29:96:01:23 
          inet6 addr: fe80::20c:29ff:fe96:123/64 Scope:Link
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:44 errors:44 dropped:0 overruns:0 frame:0
          TX packets:16 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:1000
          RX bytes:6342 (6.3 KB)  TX bytes:2988 (2.9 KB)
          Interrupt:19 Base address:0x2024

lo        Link encap:Local Loopback 
          inet addr:127.0.0.1  Mask:255.0.0.0
          inet6 addr: ::1/128 Scope:Host
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:32 errors:0 dropped:0 overruns:0 frame:0
          TX packets:32 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:4441 (4.4 KB)  TX bytes:4441 (4.4 KB)



Con la iso me pasa lo mismo, instalo BT y lo mimso que anteriormente

Estoy interesado en descargarme los videos que aparecen en esta web, (algunas secciones), para asi poder consultarlo de manera offline, ¿como puedo hacerlo?

Hola buenas, comentar que acabo de empezar aprender c# y estoy aprendiendo en el entorno de desarrollo proporcionado por microsoft, Visual studio 2010 ultimate. Para aprender estoy siguiendo un libro ( Visual c# 3º Ed. de Fco. Javier Ceballos), que utiliza el entorno de desarrollo VS 2008.
Bueno os digo mi problema:
1- creo un proyecto vacío
2- Después en las propiedades del proyecto selecciono que sera una aplicación para windows


3- Después añado un nuevo archio  .cs, para ellos pincho con botón derecho sobre el proyecto,luego agregar>Nuevo Elemento, y selecciono archivo de código.
4- A continuación escribo el código que me comenta el libro.


La cosa es que la "librería" Windows  y Drawing, no me las encuentra, por lo que la nueva clase no hereda de Form  y entonces no tengo ninguno de sus métodos o propiedades,  por lo que me aparece como error en el código

¿Por qué pasa esto?¿Le falta algo al código?¿Como lo puedo solucionar?


PD: El código editable

Código [Seleccionar] Expandir

using System;using System.Windows.Forms;
using System.Drawing;


public class Form1 : FormatException
{
    public Form1()
    {
        IniciarComponentes();
    }


    public void IniciarComponentes()
    {
        ClientSize = new ClientSize(292, 191);
        Name = "Form1";
        Text = "Saludo";
    }


    protected override void Dispose(bool eliminar)
    {
        if (eliminar)
        {
        }
        base.Dispose(eliminar);
    }


    public static void Main()
    {
        Application.Run(new Form1());
    }
}




Tengo unos problemitas al configurar la red de casa.  Tengo un puñado de router tirados por casa y he decidido darles provecho, os explico. Tengo el deco de imagenio y el router de imagenio en el salon de casa  en la planta baja. Un sobremesa lo tengo arriba y tengo tirado un cable de red desde el router del salón hasta la planta de arriba que lo conecto con sobremesa. Tengo un portátil y muchas veces estoy con el mi cuarto, que también esta arriba. La cobertura que me llega es buena, pero he pensado que podría darle algún uso a los router que tengo y ampliar la cobertura en la planta de arriba  y ademas de ampliarla pues ya tengo un router arriba para conectar ademas del sobremesa, otros pc que tengo por ahí dando vueltas(servidores).

Bueno os empiezo a decir lo que he probado y tal.

El router que da internet por así decirlo  tiene esta configuración LAN.




El cable que sube hacia la planta de arriba lo he conectado al otro router, que tiene esta configuración:



A este router conecto el sobremesa y el portátil, y ahora es aquí donde viene lo que no entiendo. Tengo habilitado en los 2 router DHCP, y tengo conectado el sobremesa y el portátil al router de arriba,   yo pienso que las direcciones IP deberían de ser 192.168.2.100 y 192.168.2.101; pues no es así  y el que me da las direcciones IP es el router principal. Decir que aquí al pasar esto tengo internet en ambos pc


Después he cambiado la cambiado la configuración del router secundario, quitando el DHCP y  poniendo en el sobremesa y portatil las direcciones IP buenas para conectarme a este (192.168.2.100 y 192.168.2.101  y la puerta de enlace 192.168.2.1). Pues bien  en este momento es cuando no tengo internet. Los pcs se ven entre ellos,  y se conectar perfectamente como he dicho al router secundario, por lo que he pensado que será la comunicación entre ambos router. He estado buscando en el principal y he visto que le puedo asignar una dirección fija a una MAC ,  y lo que he hecho es ponerle la dirección de router secundario  y asignarle una IP



Pero haciendo esto no me funciona tampoco.

¿Que puede ser?. Yo creo que es la configuración del router de arriba...
¿Por que cuando pongo ambos router en DHCP, y tengo conectados los 2 pc en el router secundario, acaban con ip del router principal?

Un saludo y gracias

Hola buenas quiero comprarme un dispositivo alfa para hacer mis auditorias y he visto estos 2:

http://www.ciudadwireless.com/alfa_network_awus036h_adaptador_wireless_antena_5dbi-54mbps_802-11b-g_conector_rp-sma-p-3355.html

http://www.ciudadwireless.com/alfa_network_awus036h_adaptador_wireless_54mbps_802-11b-g_conector_rp-sma-p-1769.html

He estado revisando las características y son las mimas, ¿por qué entonces son dispositivos diferentes y uno tiene mejor precio que otro?¿Cuál me recomienda?

Gracias

Buenas no consigo arrancar kismet. He puesto el driver, interfaz y el nombre y cuando lo ejecuto me sale esto(Yo creo que es porque solo me busca en el channel 6..):

Código [Seleccionar] Expandir

wifiway ~ # kismet
Launching kismet_server: /usr/bin/kismet_server
Will drop privs to wireless (1002) gid 1002
No specific sources given to be enabled, all will be enabled.
Enabling channel hopping.
Enabling channel splitting.
Source 0 (rt8180): Enabling monitor mode for rt8180 source interface wlan0 channel 6...
Source 0 (rt8180): Opening rt8180 source interface wlan0...
Spawned channel control process 4720
Dropped privs to wireless (1002) gid 1002
Allowing clients to fetch WEP keys.
Logging networks to Kismet-Aug-19-2010-1.network
Logging networks in CSV format to Kismet-Aug-19-2010-1.csv
Logging networks in XML format to Kismet-Aug-19-2010-1.xml
Logging cryptographically weak packets to Kismet-Aug-19-2010-1.weak
Logging cisco product information to Kismet-Aug-19-2010-1.cisco
Logging gps coordinates to Kismet-Aug-19-2010-1.gps
Logging data to Kismet-Aug-19-2010-1.dump
Writing data files to disk every 300 seconds.
Mangling encrypted and fuzzy data packets.
Tracking probe responses and associating probe networks.
Reading AP manufacturer data and defaults from /usr/etc/ap_manuf
Reading client manufacturer data and defaults from /usr/etc/client_manuf
Using network-classifier based data encryption detection
Not tracking duplicate IVs
FATAL: Dump file error: Unable to open dump file Kismet-Aug-19-2010-1.dump (Permission denied)
Sending termination request to channel control child 4720...
Waiting for channel control child 4720 to exit...
WARNING: Sometimes cards don't always come out of monitor mode
         cleanly.  If your card is not fully working, you may need to
         restart or reconfigure it for normal operation.
Kismet exiting.
Done.




Y este es mi archivo de configuración(Pero tengo seleccionado par que me busque en todos los canales):

Código [Seleccionar] Expandir

# Kismet config file
# Most of the "static" configs have been moved to here -- the command line
# config was getting way too crowded and cryptic.  We want functionality,
# not continually reading --help!

# Version of Kismet config
version=2007.10.R1

# Name of server (Purely for organizational purposes)
servername=Kismet

# User to setid to (should be your normal user)

suiduser=wireless

# Sources are defined as:
# source=sourcetype,interface,name[,initialchannel]
# Source types and required drivers are listed in the README under the
# CAPTURE SOURCES section.
# The initial channel is optional, if hopping is not enabled it can be used
# to set the channel the interface listens on.
# YOU MUST CHANGE THIS TO BE THE SOURCE YOU WANT TO USE


#source=rt2500,rausb0,kismet
source=rt8180,wlan0,rt8180

# Comma-separated list of sources to enable.  This is only needed if you defined
# multiple sources and only want to enable some of them.  By default, all defined
# sources are enabled.
# For example:
# enablesources=prismsource,ciscosource

# Do we channelhop?
channelhop=true

# How many channels per second do we hop?  (1-10)
channelvelocity=5

# By setting the dwell time for channel hopping we override the channelvelocity
# setting above and dwell on each channel for the given number of seconds.
#channeldwell=10

# Do we split channels between cards on the same spectrum?  This means if
# multiple 802.11b capture sources are defined, they will be offset to cover
# the most possible spectrum at a given time.  This also controls splitting
# fine-tuned sourcechannels lines which cover multiple interfaces (see below)
channelsplit=true

# Basic channel hopping control:
# These define the channels the cards hop through for various frequency ranges
# supported by Kismet.   More finegrain control is available via the
# "sourcechannels" configuration option.
#
# Don't change the IEEE80211<x> identifiers or channel hopping won't work.

# Users outside the US might want to use this list:
# defaultchannels=IEEE80211b:1,7,13,2,8,3,14,9,4,10,5,11,6,12
defaultchannels=IEEE80211b:1,6,11,2,7,3,8,4,9,5,10

# 802.11g uses the same channels as 802.11b...
defaultchannels=IEEE80211g:1,6,11,2,7,3,8,4,9,5,10

# 802.11a channels are non-overlapping so sequential is fine.  You may want to
# adjust the list depending on the channels your card actually supports.
# defaultchannels=IEEE80211a:36,40,44,48,52,56,60,64,100,104,108,112,116,120,124,128,132,136,140,149,153,157,161,184,188,192,196,200,204,208,212,216
defaultchannels=IEEE80211a:36,40,44,48,52,56,60,64

# Combo cards like Atheros use both 'a' and 'b/g' channels.  Of course, you
# can also explicitly override a given source.  You can use the script
# extras/listchan.pl to extract all the channels your card supports.
defaultchannels=IEEE80211ab:1,6,11,2,7,3,8,4,9,5,10,36,40,44,48,52,56,60,64

# Fine-tuning channel hopping control:
# The sourcechannels option can be used to set the channel hopping for
# specific interfaces, and to control what interfaces share a list of
# channels for split hopping.  This can also be used to easily lock
# one card on a single channel while hopping with other cards.
# Any card without a sourcechannel definition will use the standard hopping
# list.
# sourcechannels=sourcename[,sourcename]:ch1,ch2,ch3,...chN

# ie, for us channels on the source 'prism2source' (same as normal channel
# hopping behavior):
# sourcechannels=prism2source:1,6,11,2,7,3,8,4,9,5,10

# Given two capture sources, "prism2a" and "prism2b", we want prism2a to stay
# on channel 6 and prism2b to hop normally.  By not setting a sourcechannels
# line for prism2b, it will use the standard hopping.
# sourcechannels=prism2a:6

# To assign the same custom hop channel to multiple sources, or to split the
# same custom hop channel over two sources (if splitchannels is true), list
# them all on the same sourcechannels line:
# sourcechannels=prism2a,prism2b,prism2c:1,6,11

# Port to serve GUI data
tcpport=2501
# People allowed to connect, comma seperated IP addresses or network/mask
# blocks.  Netmasks can be expressed as dotted quad (/255.255.255.0) or as
# numbers (/24)
allowedhosts=127.0.0.1
# Address to bind to.  Should be an address already configured already on
# this host, reverts to INADDR_ANY if specified incorrectly.
bindaddress=127.0.0.1
# Maximum number of concurrent GUI's
maxclients=5

# Do we have a GPS?
gps=true
# Host:port that GPSD is running on.  This can be localhost OR remote!
gpshost=localhost:2947
# Do we lock the mode?  This overrides coordinates of lock "0", which will
# generate some bad information until you get a GPS lock, but it will
# fix problems with GPS units with broken NMEA that report lock 0
gpsmodelock=false

# Packet filtering options:
# filter_tracker - Packets filtered from the tracker are not processed or
#                  recorded in any way.
# filter_dump    - Packets filtered at the dump level are tracked, displayed,
#                  and written to the csv/xml/network/etc files, but not
#                  recorded in the packet dump
# filter_export  - Controls what packets influence the exported CSV, network,
#                  xml, gps, etc files.
# All filtering options take arguments containing the type of address and
# addresses to be filtered.  Valid address types are 'ANY', 'BSSID',
# 'SOURCE', and 'DEST'.  Filtering can be inverted by the use of '!' before
# the address.  For example,
# filter_tracker=ANY(!00:00:DE:AD:BE:EF)
# has the same effect as the previous mac_filter config file option.
# filter_tracker=...
# filter_dump=...
# filter_export=...

# Alerts to be reported and the throttling rates.
# alert=name,throttle/unit,burst/unit
# The throttle/unit describes the number of alerts of this type that are
# sent per time unit.  Valid time units are second, minute, hour, and day.
# Burst rates control the number of packets sent at a time
# For example:
# alert=FOO,10/min,5/sec
# Would allow 5 alerts per second, and 10 alerts total per minute.
# A throttle rate of 0 disables throttling of the alert.
# See the README for a list of alert types.
alert=NETSTUMBLER,10/min,1/sec
alert=WELLENREITER,10/min,1/sec
alert=LUCENTTEST,10/min,1/sec
alert=DEAUTHFLOOD,10/min,2/sec
alert=BCASTDISCON,10/min,2/sec
alert=CHANCHANGE,5/min,1/sec
alert=AIRJACKSSID,5/min,1/sec
alert=PROBENOJOIN,10/min,1/sec
alert=DISASSOCTRAFFIC,10/min,1/sec
alert=NULLPROBERESP,10/min,1/sec
alert=BSSTIMESTAMP,10/min,1/sec
alert=MSFBCOMSSID,10/min,1/sec
alert=LONGSSID,10/min,1/sec
alert=MSFDLINKRATE,10/min,1/sec
alert=MSFNETGEARBEACON,10/min,1/sec
alert=DISCONCODEINVALID,10/min,1/sec
alert=DEAUTHCODEINVALID,10/min,1/sec

# Known WEP keys to decrypt, bssid,hexkey.  This is only for networks where
# the keys are already known, and it may impact throughput on slower hardware.
# Multiple wepkey lines may be used for multiple BSSIDs.
# wepkey=00:DE:AD:C0:DE:00,FEEDFACEDEADBEEF01020304050607080900

# Is transmission of the keys to the client allowed?  This may be a security
# risk for some.  If you disable this, you will not be able to query keys from
# a client.
allowkeytransmit=true

# How often (in seconds) do we write all our data files (0 to disable)
writeinterval=300

# Do we use sound?
# Not to be confused with GUI sound parameter, this controls wether or not the
# server itself will play sound.  Primarily for headless or automated systems.
sound=false
# Path to sound player
soundplay=/usr/bin/play
# Optional parameters to pass to the player
# soundopts=--volume=.3
# New network found
sound_new=${prefix}/share/kismet/wav/new_network.wav
# Wepped new network
# sound_new_wep=${prefix}/com/kismet/wav/new_wep_network.wav
# Network traffic sound
sound_traffic=${prefix}/share/kismet/wav/traffic.wav
# Network junk traffic found
sound_junktraffic=${prefix}/share/kismet/wav/junk_traffic.wav
# GPS lock aquired sound
# sound_gpslock=${prefix}/share/kismet/wav/foo.wav
# GPS lock lost sound
# sound_gpslost=${prefix}/share/kismet/wav/bar.wav
# Alert sound
sound_alert=${prefix}/share/kismet/wav/alert.wav

# Does the server have speech? (Again, not to be confused with the GUI's speech)
speech=false
# Server's path to Festival
festival=/usr/bin/festival
# Are we using festival lite?  If so, set the above "festival" path to also
# point to the "flite" binary
flite=false
# How do we speak?  Valid options:
# speech    Normal speech
# nato      NATO spellings (alpha, bravo, charlie)
# spell     Spell the letters out (aye, bee, sea)
speech_type=nato
# speech_encrypted and speech_unencrypted - Speech templates
# Similar to the logtemplate option, this lets you customize the speech output.
# speech_encrypted is used for an encrypted network spoken string
# speech_unencrypted is used for an unencrypted network spoken string
#
# %b is replaced by the BSSID (MAC) of the network
# %s is replaced by the SSID (name) of the network
# %c is replaced by the CHANNEL of the network
# %r is replaced by the MAX RATE of the network
speech_encrypted=New network detected, s.s.i.d. %s, channel %c, network encrypted.
speech_unencrypted=New network detected, s.s.i.d. %s, channel %c, network open.

# Where do we get our manufacturer fingerprints from?  Assumed to be in the
# default config directory if an absolute path is not given.
ap_manuf=ap_manuf
client_manuf=client_manuf

# Use metric measurements in the output?
metric=false

# Do we write waypoints for gpsdrive to load?  Note:  This is NOT related to
# recent versions of GPSDrive's native support of Kismet.
waypoints=false
# GPSDrive waypoint file.  This WILL be truncated.
waypointdata=%h/.gpsdrive/way_kismet.txt
# Do we want ESSID or BSSID as the waypoint name ?
waypoint_essid=false

# How many alerts do we backlog for new clients?  Only change this if you have
# a -very- low memory system and need those extra bytes, or if you have a high
# memory system and a huge number of alert conditions.
alertbacklog=50

# File types to log, comma seperated
# dump    - raw packet dump
# network - plaintext detected networks
# csv     - plaintext detected networks in CSV format
# xml     - XML formatted network and cisco log
# weak    - weak packets (in airsnort format)
# cisco   - cisco equipment CDP broadcasts
# gps     - gps coordinates
logtypes=dump,network,csv,xml,weak,cisco,gps

# Do we track probe responses and merge probe networks into their owners?
# This isn't always desireable, depending on the type of monitoring you're
# trying to do.
trackprobenets=true

# Do we log "noise" packets that we can't decipher?  I tend to not, since
# they don't have anything interesting at all in them.
noiselog=false

# Do we log corrupt packets?  Corrupt packets have enough header information
# to see what they are, but someting is wrong with them that prevents us from
# completely dissecting them.  Logging these is usually not a bad idea.
corruptlog=true

# Do we log beacon packets or do we filter them out of the dumpfile
beaconlog=true

# Do we log PHY layer packets or do we filter them out of the dumpfile
phylog=true

# Do we mangle packets if we can decrypt them or if they're fuzzy-detected
mangledatalog=true

# Do we do "fuzzy" crypt detection?  (byte-based detection instead of 802.11
# frame headers)
# valid option: Comma seperated list of card types to perform fuzzy detection
#  on, or 'all'
fuzzycrypt=wtapfile,wlanng,wlanng_legacy,wlanng_avs,hostap,wlanng_wext,ipw2200,ipw2915

# Do we do forgiving fuzzy packet decoding?  This lets us handle borked drivers
# which don't indicate they're including FCS, and then do.
fuzzydecode=wtapfile,radiotap_bsd_a,radiotap_bsd_g,radiotap_bsd_bg,radiotap_bsd_b,pcapfile

# Do we use network-classifier fuzzy-crypt detection?  This means we expect
# packets that are associated with an encrypted network to be encrypted too,
# and we process them by the same fuzzy compare.
# This essentially replaces the fuzzycrypt per-source option.
netfuzzycrypt=true

# What type of dump do we generate?
# valid option: "wiretap"
dumptype=wiretap
# Do we limit the size of dump logs?  Sometimes ethereal can't handle big ones.
# 0 = No limit
# Anything else = Max number of packets to log to a single file before closing
# and opening a new one.
dumplimit=0

# Do we write data packets to a FIFO for an external data-IDS (such as Snort)?
# See the docs before enabling this.
#fifo=/tmp/kismet_dump

# Default log title
logdefault=Kismet

# logtemplate - Filename logging template.
# This is, at first glance, really nasty and ugly, but you'll hardly ever
# have to touch it so don't complain too much.
#
# %n is replaced by the logging instance name
# %d is replaced by the current date as Mon-DD-YYYY
# %D is replaced by the current date as YYYYMMDD
# %t is replaced by the starting log time
# %i is replaced by the increment log in the case of multiple logs
# %l is replaced by the log type (dump, status, crypt, etc)
# %h is replaced by the home directory
# ie, "netlogs/%n-%d-%i.dump" called with a logging name of "Pok" could expand
# to something like "netlogs/Pok-Dec-20-01-1.dump" for the first instance and
# "netlogs/Pok-Dec-20-01-2.%l" for the second logfile generated.
# %h/netlots/%n-%d-%i.dump could expand to
# /home/foo/netlogs/Pok-Dec-20-01-2.dump
#
# Other possibilities:  Sorting by directory
# logtemplate=%l/%n-%d-%i
# Would expand to, for example,
# dump/Pok-Dec-20-01-1
# crypt/Pok-Dec-20-01-1
# and so on.  The "dump", "crypt", etc, dirs must exist before kismet is run
# in this case.
logtemplate=%n-%d-%i.%l

# Where do we store the pid file of the server?
piddir=/var/run/

# Where state info, etc, is stored.  You shouldnt ever need to change this.
# This is a directory.
configdir=%h/.kismet/

# cloaked SSID file.  You shouldn't ever need to change this.
ssidmap=ssid_map

# Group map file.  You shouldn't ever need to change this.
groupmap=group_map

# IP range map file.  You shouldn't ever need to change this.
ipmap=ip_map



Buenas tengo un macbook pro de 13'3" y tengo en una maquina virtual wifiway instalado. Tengo una Erize de 1W, más concretamente la ERZW54-USB04RS1W. Tengo mi red de casa con cifrado WPA y me gustaría  poder conseguir el handshake, pero el problema es que nunca lo consigo, y estuve leyendo por ahí que para conseguirlo más facilmente la cobertura de la antena donde estamos realizando el ataque debería de ser mayor que la que tiene el cliente que está conectado al AP.
Pues bien a mí wifiway siempe me dice que mi airport tiene una señal de 100% mientras que me dice que la erize tiene entorno a un 44%, por lo que pienso que por esto no puedo conseguir el handshake, ¿Cómo es posible que tenga más cobertura con airport que con erize?¿Se falsean los resultados?



Un saludo

Buenas tengo dudas de porque al especificar un canal con airodump-ng me escanea varias redes wifi de otros canales. He aquí un ejemplo

Código [Seleccionar] Expandir

wifiway ~ # airmon-ng stop wlan0


Interface       Chipset         Driver

wlan0           RTL8187         r8187 (monitor mode disabled)

wifiway ~ # airmon-ng start  wlan0 6


Interface       Chipset         Driver

wlan0           RTL8187         r8187 (monitor mode enabled)

wifiway ~ # airo
airodump        airoipw2200.sh  airopdate.sh    airoscript.es   airoway.sh
airodump-ng     airolib-ng      airoscript.chi  airoscript.sh
wifiway ~ # airodump-ng  -w lan -c 6 wlan0




¿Por qué ocurre esto?

Un saludo

Buenas estoy intentando sacar la KEY de mi router, y nunca consigo el handshake pero eso es tema aparte... la cosa es que al hacer el ataque  A0 con:

Código [Seleccionar] Expandir

aireplay-ng -0 50 -a --:--:--:--:--:-- -c --:--:--:--:--:-- wlan0

pues tengo el problema que especifico el canal donde se encuentra la victima y esta todo el rato probando canales diferentes, y tengo que ir probando hasta que coincidia. Por ejemplo:

Código [Seleccionar] Expandir

wifiway ~ # aireplay-ng -0 50 -a --:--:--:--:-- -c --:--:--:--:--:-- wlan0
16:26:28  Waiting for beacon frame (BSSID: .....) on channel 2
16:26:28  wlan0 is on channel 2, but the AP uses channel 4
wifiway ~ # aireplay-ng -0 50 -a ..... -c ..... wlan0
16:26:29  Waiting for beacon frame (BSSID: ......) on channel 6
16:26:29  wlan0 is on channel 6, but the AP uses channel 4
wifiway ~ # aireplay-ng -0 50 -a ..... -c .... wlan0
16:26:30  Waiting for beacon frame (BSSID: ....) on channel 4
16:26:30  Sending 64 directed DeAuth. STMAC: [....] [ 0| 1 ACKs]
16:26:31  Sending 64 directed DeAuth. STMAC: [...] [ 0| 0 ACKs]
16:26:32  Sending 64 directed DeAuth. STMAC: [...] [ 0| 0 ACKs]
16:26:33  Sending 64 directed DeAuth. STMAC: [...] [ 0| 0 ACKs]
16:26:34  Sending 64 directed DeAuth. STMAC: [...] [ 0| 0 ACKs]

En ningún manual he visto comentado esto, así que supongo que algo estaré haciendo mal...

Gracias