Muy bueno el tutorial, te felicito!! Tengo una duda y espero que lo entiendan y a la vez intentar resolver:
Mi laptop es una lenovo SL400, le coloque Windows7, el wifi chipset es una Intel(R) WiFi Link 5100 AGN, lo busque en el CommView y si es compatible, pero con algunas recomendaciones que cumplí:
"Supported only under Windows Vista, Windows 2008, and Windows 7.
Make sure that the Intel driver that you are using for your adapter is version 12.4.3.9 or higher. Older driver versions will not work properly in monitor mode. If you're using an older driver version, please visit www.intel.com to download the latest version.
When install/updating the driver for your Intel adapter, install the driver only. Do not install "Intel PROSet/Wireless" or "Intel My WiFi" utilities; let Windows manage your Wi-Fi connection. If these utilities are installed, the application might be unable to capture packets.
Packet injection using Packet Generator is not possible.
Noise level is unavailable.
When monitoring 802.11n networks, you cannot capture packets sent using 40 MHz channel bonding. This is an issue with the adapter driver that is out of our control.
When monitoring 802.11n networks, the adapter driver reports the packet transmission rate of 802.11n packets incorrectly. For example, a packet with a rate of 130 Mbps might appear with a rate of 1 Mbps or 9 Mbps. This is an issue with the adapter driver that is out of our control."
Lo instale, le dije ayuda para instalar el software y me dice que todo esta perfecto, pero apenas abrir el programa me cierra la conexión wifi (como si estuviera apagado), realizo todos los pasos según el manual y nada que me señala alguna red, y estoy probando con la red de mi casa, le cambie la clave al router, desinstale los drivers y los volvi a instalar y nada. Alguna recomendación?
Mi laptop es una lenovo SL400, le coloque Windows7, el wifi chipset es una Intel(R) WiFi Link 5100 AGN, lo busque en el CommView y si es compatible, pero con algunas recomendaciones que cumplí:
"Supported only under Windows Vista, Windows 2008, and Windows 7.
Make sure that the Intel driver that you are using for your adapter is version 12.4.3.9 or higher. Older driver versions will not work properly in monitor mode. If you're using an older driver version, please visit www.intel.com to download the latest version.
When install/updating the driver for your Intel adapter, install the driver only. Do not install "Intel PROSet/Wireless" or "Intel My WiFi" utilities; let Windows manage your Wi-Fi connection. If these utilities are installed, the application might be unable to capture packets.
Packet injection using Packet Generator is not possible.
Noise level is unavailable.
When monitoring 802.11n networks, you cannot capture packets sent using 40 MHz channel bonding. This is an issue with the adapter driver that is out of our control.
When monitoring 802.11n networks, the adapter driver reports the packet transmission rate of 802.11n packets incorrectly. For example, a packet with a rate of 130 Mbps might appear with a rate of 1 Mbps or 9 Mbps. This is an issue with the adapter driver that is out of our control."
Lo instale, le dije ayuda para instalar el software y me dice que todo esta perfecto, pero apenas abrir el programa me cierra la conexión wifi (como si estuviera apagado), realizo todos los pasos según el manual y nada que me señala alguna red, y estoy probando con la red de mi casa, le cambie la clave al router, desinstale los drivers y los volvi a instalar y nada. Alguna recomendación?