necesito ayuda por favor tengo demasiados posavasosn creo q hasta puedo poner un negocio!...
mi grabadora es una lg gce-8520b 52x24x52x, hace unas semanas mi quemadora ha comenzado a fallar y graba mal las pelis que me bajo. Utilizo el nero 5.5.10.20 .
He programado la medicion de velocidad y la simulacion, las que se realizan sin inconvenientes. me he percatado que al finalizar la simulacion al 99%, el bufer de lectura cae paulatinamente hasta el 0% , cuando se inicia la grabacion, el bufer de lectura y del grabador no marcan nada!, luego de un par de segundos el bufer de lectura se normaliza , pero la grabacion q ya esta en 2% se congela por unos segundos, mientras, que el bufer de grabacion tambien se congela en 94%, baja inmediatamente a 21% y luego sube a 94%.
El proceso de comprobacion falla y me sale esto en el log:
USER
1506-2037-6374-1535-6063-0313
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Archivos de programa\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 29/01/2003 10:37:36 p.m.
Nero Version: 5.5.10.20 (Nero Express)
Recorder: <HL-DT-ST CD-RW GCE-8520B>Version: 1.03 - HA 1 TA 1 - 5.5.10.20
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <HL-DT-ST CD-RW GCE-8520B>Version: 1.03 - HA 1 TA 1 - 5.5.10.20
Adapter driver: <atapi> HA 1
Bus Type : default (0) -> ATAPI, detected: ATAPI
=== Scsi-Device-Map ===
DiskPeripheral : QUANTUM FIREBALLlct20 30 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST CD-RW GCE-8520B atapi Port 1 ID 1 DMA: Off
=======================
AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 36700160 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 223MB (228848kB)
Free physical memory: 70MB (72652kB)
Memory in use : 68 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Enabled (1)
Wizard: Off
21.7.2006
CD-ROM (ISO)
03:58:42 p.m. #1 Text 0 File Isodoc.cpp, Line 7579
Iso document burn settings
------------------------------------------
Determine maximum speed : TRUE
Simulate : TRUE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
03:58:43 p.m. #2 Phase 90 File dlgbrnst.cpp, Line 1655
Buffer Underrun Protection activated
03:58:43 p.m. #3 Text 0 File Reader.cpp, Line 115
Reader running
03:58:43 p.m. #4 Text 0 File Writer.cpp, Line 125
Writer HL-DT-ST CD-RW GCE-8520B running
03:58:43 p.m. #5 ISO9660GEN -11 File geniso.cpp, Line 4563
First writeable address = 0 (0x00000000)
03:58:43 p.m. #6 Text 0 File Burncd.cpp, Line 3726
Turn on Track-At-Once, using CD-R/RW media
03:58:43 p.m. #7 Text 0 File ThreadedTransferInterface.cpp, Line 672
Setup items (original item values)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 358779 (358779) = #358779/79:43.54
relocatable, CD pos for caching/writing not required/required, no patch infos
--------------------------------------------------------------
03:58:45 p.m. #8 Text 0 File DlgWaitCD.cpp, Line 215
Last possible write address on media: 359848 (79:59.73)
Last address to be written: 358778 (79:45.53)
03:58:45 p.m. #9 Text 0 File DlgWaitCD.cpp, Line 220
Write in overburning mode: FALSE
03:58:45 p.m. #10 Text 0 File DlgWaitCD.cpp, Line 1657
Recorder: HL-DT-ST CD-RW GCE-8520B;
CDR code: 00 97 27 28; OSJ entry from: Princo Corporation
ATIP Data:
Special Info [hex] 1: F0 00 80, 2: 61 1B 1C (LI 97:27.28), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid)
03:58:45 p.m. #11 Text 0 File ThreadedTransferInterface.cpp, Line 824
Prepare recorder HL-DT-ST CD-RW GCE-8520B for write in TAO
DAO infos:
==========
MCN:
TOCTYPE: 0x0 Session Closed, CD fixated
Tracks 1 to 1:
TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 735086592
03:58:45 p.m. #12 Text 0 File ThreadedTransferInterface.cpp, Line 852
Removed 2 run-out blocks from end of track 1.
03:58:45 p.m. #13 Text 0 File ThreadedTransferInterface.cpp, Line 672
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 358779 (358779) = #358779/79:43.54
relocatable, CD pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 358777 blocks [HL-DT-ST CD-RW GCE-8520B ]
--------------------------------------------------------------
03:58:45 p.m. #14 Phase 24 File dlgbrnst.cpp, Line 1655
Caching of files started
03:58:45 p.m. #15 Phase 25 File dlgbrnst.cpp, Line 1655
Caching of files completed
03:58:45 p.m. #16 Phase 28 File dlgbrnst.cpp, Line 1655
Speed measurement started
03:58:45 p.m. #17 Text 0 File ThreadedTransferInterface.cpp, Line 1978
Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0
04:00:44 p.m. #18 Text 0 File ThreadedTransfer.cpp, Line 219
all writers idle, stopping conversion
04:00:44 p.m. #19 Phase 29 File dlgbrnst.cpp, Line 1625
Speed measurement completed: 42.2x (6,330 KB/s)
04:00:44 p.m. #20 Phase 32 File dlgbrnst.cpp, Line 1655
Simulation started at 12x (1,800 KB/s)
04:00:44 p.m. #21 Text 0 File ThreadedTransferInterface.cpp, Line 1978
Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0
04:00:44 p.m. #22 Text 0 File Mmc.cpp, Line 17693
Set BUFE: supported -> ON
04:07:30 p.m. #23 Text 0 File ThreadedTransfer.cpp, Line 219
all writers idle, stopping conversion
04:07:40 p.m. #24 Phase 33 File dlgbrnst.cpp, Line 1655
Simulation completed successfully at 12x (1,800 KB/s)
04:07:40 p.m. #25 Phase 36 File dlgbrnst.cpp, Line 1655
Burn process started at 12x (1,800 KB/s)
04:07:40 p.m. #26 Text 0 File ThreadedTransferInterface.cpp, Line 1978
Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0
04:07:40 p.m. #27 Text 0 File Mmc.cpp, Line 17693
Set BUFE: supported -> ON
04:14:38 p.m. #28 Text 0 File ThreadedTransfer.cpp, Line 219
all writers idle, stopping conversion
04:14:56 p.m. #29 Text 0 File Mmc.cpp, Line 12699
<HL-DT-STCD-RW GCE-8520B > start Close Session
04:15:40 p.m. #30 Phase 37 File dlgbrnst.cpp, Line 1655
Burn process completed successfully at 12x (1,800 KB/s)
04:15:49 p.m. #31 Phase 78 File dlgbrnst.cpp, Line 1655
Data verification started
04:16:08 p.m. #32 VERIFYERR 6 File UDFCompilationImpl.cpp, Line 5912
Read error on CD file
shcd1.avi
04:16:08 p.m. #33 VERIFYERR 13 File UDFCompilationImpl.cpp, Line 6449
Status summary
Total de archivos=2, idénticos=0, distintos=0, inaccesibles=1, omitidos=1.
04:16:08 p.m. #34 Phase 81 File dlgbrnst.cpp, Line 1655
Data verification failed
04:16:08 p.m. #35 Text 0 File Scsicmd.cpp, Line 406
SCSI not using temporary buffers
20 out of 20 temporary buffers allocated
Existing drivers:
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 03/08/2004 10:59:44 p.m. (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
¿ a que se debe esta falla?
algunos dicen q puede ser q la lente este sucia
otros q falla el firmware
¿ un cd limpiadr es una buena opcion?
he buscado el firmware para mi quemadora pero no lo he encontrado, ni en la pagina de lg!
mi grabadora es una lg gce-8520b 52x24x52x, hace unas semanas mi quemadora ha comenzado a fallar y graba mal las pelis que me bajo. Utilizo el nero 5.5.10.20 .
He programado la medicion de velocidad y la simulacion, las que se realizan sin inconvenientes. me he percatado que al finalizar la simulacion al 99%, el bufer de lectura cae paulatinamente hasta el 0% , cuando se inicia la grabacion, el bufer de lectura y del grabador no marcan nada!, luego de un par de segundos el bufer de lectura se normaliza , pero la grabacion q ya esta en 2% se congela por unos segundos, mientras, que el bufer de grabacion tambien se congela en 94%, baja inmediatamente a 21% y luego sube a 94%.
El proceso de comprobacion falla y me sale esto en el log:
USER
1506-2037-6374-1535-6063-0313
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Archivos de programa\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 29/01/2003 10:37:36 p.m.
Nero Version: 5.5.10.20 (Nero Express)
Recorder: <HL-DT-ST CD-RW GCE-8520B>Version: 1.03 - HA 1 TA 1 - 5.5.10.20
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <HL-DT-ST CD-RW GCE-8520B>Version: 1.03 - HA 1 TA 1 - 5.5.10.20
Adapter driver: <atapi> HA 1
Bus Type : default (0) -> ATAPI, detected: ATAPI
=== Scsi-Device-Map ===
DiskPeripheral : QUANTUM FIREBALLlct20 30 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST CD-RW GCE-8520B atapi Port 1 ID 1 DMA: Off
=======================
AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 36700160 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 223MB (228848kB)
Free physical memory: 70MB (72652kB)
Memory in use : 68 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Enabled (1)
Wizard: Off
21.7.2006
CD-ROM (ISO)
03:58:42 p.m. #1 Text 0 File Isodoc.cpp, Line 7579
Iso document burn settings
------------------------------------------
Determine maximum speed : TRUE
Simulate : TRUE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
03:58:43 p.m. #2 Phase 90 File dlgbrnst.cpp, Line 1655
Buffer Underrun Protection activated
03:58:43 p.m. #3 Text 0 File Reader.cpp, Line 115
Reader running
03:58:43 p.m. #4 Text 0 File Writer.cpp, Line 125
Writer HL-DT-ST CD-RW GCE-8520B running
03:58:43 p.m. #5 ISO9660GEN -11 File geniso.cpp, Line 4563
First writeable address = 0 (0x00000000)
03:58:43 p.m. #6 Text 0 File Burncd.cpp, Line 3726
Turn on Track-At-Once, using CD-R/RW media
03:58:43 p.m. #7 Text 0 File ThreadedTransferInterface.cpp, Line 672
Setup items (original item values)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 358779 (358779) = #358779/79:43.54
relocatable, CD pos for caching/writing not required/required, no patch infos
--------------------------------------------------------------
03:58:45 p.m. #8 Text 0 File DlgWaitCD.cpp, Line 215
Last possible write address on media: 359848 (79:59.73)
Last address to be written: 358778 (79:45.53)
03:58:45 p.m. #9 Text 0 File DlgWaitCD.cpp, Line 220
Write in overburning mode: FALSE
03:58:45 p.m. #10 Text 0 File DlgWaitCD.cpp, Line 1657
Recorder: HL-DT-ST CD-RW GCE-8520B;
CDR code: 00 97 27 28; OSJ entry from: Princo Corporation
ATIP Data:
Special Info [hex] 1: F0 00 80, 2: 61 1B 1C (LI 97:27.28), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid)
03:58:45 p.m. #11 Text 0 File ThreadedTransferInterface.cpp, Line 824
Prepare recorder HL-DT-ST CD-RW GCE-8520B for write in TAO
DAO infos:
==========
MCN:
TOCTYPE: 0x0 Session Closed, CD fixated
Tracks 1 to 1:
TRM_DATA_MODE1, 2048/0x0, ISRC "", FilePos 0 307200 735086592
03:58:45 p.m. #12 Text 0 File ThreadedTransferInterface.cpp, Line 852
Removed 2 run-out blocks from end of track 1.
03:58:45 p.m. #13 Text 0 File ThreadedTransferInterface.cpp, Line 672
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original CD pos #0 + 358779 (358779) = #358779/79:43.54
relocatable, CD pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 358777 blocks [HL-DT-ST CD-RW GCE-8520B ]
--------------------------------------------------------------
03:58:45 p.m. #14 Phase 24 File dlgbrnst.cpp, Line 1655
Caching of files started
03:58:45 p.m. #15 Phase 25 File dlgbrnst.cpp, Line 1655
Caching of files completed
03:58:45 p.m. #16 Phase 28 File dlgbrnst.cpp, Line 1655
Speed measurement started
03:58:45 p.m. #17 Text 0 File ThreadedTransferInterface.cpp, Line 1978
Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0
04:00:44 p.m. #18 Text 0 File ThreadedTransfer.cpp, Line 219
all writers idle, stopping conversion
04:00:44 p.m. #19 Phase 29 File dlgbrnst.cpp, Line 1625
Speed measurement completed: 42.2x (6,330 KB/s)
04:00:44 p.m. #20 Phase 32 File dlgbrnst.cpp, Line 1655
Simulation started at 12x (1,800 KB/s)
04:00:44 p.m. #21 Text 0 File ThreadedTransferInterface.cpp, Line 1978
Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0
04:00:44 p.m. #22 Text 0 File Mmc.cpp, Line 17693
Set BUFE: supported -> ON
04:07:30 p.m. #23 Text 0 File ThreadedTransfer.cpp, Line 219
all writers idle, stopping conversion
04:07:40 p.m. #24 Phase 33 File dlgbrnst.cpp, Line 1655
Simulation completed successfully at 12x (1,800 KB/s)
04:07:40 p.m. #25 Phase 36 File dlgbrnst.cpp, Line 1655
Burn process started at 12x (1,800 KB/s)
04:07:40 p.m. #26 Text 0 File ThreadedTransferInterface.cpp, Line 1978
Verifying CD position of item 0 (relocatable, CD pos, no patch infos, orig at #0): write at #0
04:07:40 p.m. #27 Text 0 File Mmc.cpp, Line 17693
Set BUFE: supported -> ON
04:14:38 p.m. #28 Text 0 File ThreadedTransfer.cpp, Line 219
all writers idle, stopping conversion
04:14:56 p.m. #29 Text 0 File Mmc.cpp, Line 12699
<HL-DT-STCD-RW GCE-8520B > start Close Session
04:15:40 p.m. #30 Phase 37 File dlgbrnst.cpp, Line 1655
Burn process completed successfully at 12x (1,800 KB/s)
04:15:49 p.m. #31 Phase 78 File dlgbrnst.cpp, Line 1655
Data verification started
04:16:08 p.m. #32 VERIFYERR 6 File UDFCompilationImpl.cpp, Line 5912
Read error on CD file
shcd1.avi
04:16:08 p.m. #33 VERIFYERR 13 File UDFCompilationImpl.cpp, Line 6449
Status summary
Total de archivos=2, idénticos=0, distintos=0, inaccesibles=1, omitidos=1.
04:16:08 p.m. #34 Phase 81 File dlgbrnst.cpp, Line 1655
Data verification failed
04:16:08 p.m. #35 Text 0 File Scsicmd.cpp, Line 406
SCSI not using temporary buffers
20 out of 20 temporary buffers allocated
Existing drivers:
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 03/08/2004 10:59:44 p.m. (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
¿ a que se debe esta falla?
algunos dicen q puede ser q la lente este sucia
otros q falla el firmware
¿ un cd limpiadr es una buena opcion?
he buscado el firmware para mi quemadora pero no lo he encontrado, ni en la pagina de lg!